Soliver84 Posted January 8, 2023 Share Posted January 8, 2023 (edited) Hallo Ich habe eine Defekte Festplatte, die habe ich schon ausgebaut und die exakt gleiche in Neu am gleichen Platz installiert: Alte Platte: WDC_WD30EFRX-68EUZN0_WD-WCC4N3YFCX30 Neue Platte: WDC_WD30EFRX-68EUZN0_WD-WCC4N4JC7Z2D Name: Dev 7, sdf Status: root@Tower:~# zpool status pool: QNAPZFS state: ONLINE status: Some supported and requested features are not enabled on the pool. The pool can still be used, but some features are unavailable. action: Enable all features using 'zpool upgrade'. Once this is done, the pool may no longer be accessible by software that does not support the features. See zpool-features(7) for details. scan: scrub repaired 0B in 03:22:47 with 0 errors on Sun Jul 11 03:46:49 2021 config: NAME STATE READ WRITE CKSUM QNAPZFS ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 ata-WDC_WD4001FFSX-68JNUN0_WD-WMC5D0D7LTZU ONLINE 0 0 0 ata-WDC_WD4001FFSX-68JNUN0_WD-WCC5D7KUKYPJ ONLINE 0 0 0 ata-WDC_WD4001FFSX-68JNUN0_WD-WMC5D0D5NH7C ONLINE 0 0 0 ata-WDC_WD4003FFBX-68MU3N0_VBG9L6RR ONLINE 0 0 0 ata-WDC_WD4003FZEX-00Z4SA0_WD-WCC5D0CJL5YC ONLINE 0 0 0 logs sda1 ONLINE 0 0 0 cache sda2 ONLINE 0 0 0 errors: No known data errors pool: QNAPZFS2 state: DEGRADED status: One or more devices could not be used because the label is missing or invalid. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Replace the device using 'zpool replace'. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-4J scan: resilvered 612K in 00:00:01 with 0 errors on Sun Oct 3 22:53:36 2021 config: NAME STATE READ WRITE CKSUM QNAPZFS2 DEGRADED 0 0 0 raidz1-0 DEGRADED 0 0 0 ata-WDC_WD30EFRX-68EUZN0_WD-WCC4N5YF8H99 ONLINE 0 0 0 ata-WDC_WD30EFRX-68EUZN0_WD-WCC4N5EXDXX2 ONLINE 0 0 0 13419636845726771512 UNAVAIL 0 0 0 was /dev/disk/by-id/ata-WDC_WD30EFRX-68EUZN0_WD-WCC4N3YFCX30-part1 ata-ST3000VN000-1H4167_W300S9DZ ONLINE 0 0 0 ata-ST3000VN000-1H4167_W300SJ43 ONLINE 0 0 0 errors: No known data errors Meine Versuche: root@Tower:~# zpool replace QNAPZFS2 raidz1-0 ata-WDC_WD30EFRX-68EUZN0_WD-WCC4N4JC7Z2D cannot replace raidz1-0 with ata-WDC_WD30EFRX-68EUZN0_WD-WCC4N4JC7Z2D: already in replacing/spare config; wait for completion or use 'zpool detach' root@Tower:~# zpool replace QNAPZFS2 raidz1-0 /dev/disk/by-id/ata-WDC_WD30EFRX-68EUZN0_WD-WCC4N4JC7Z2D cannot replace raidz1-0 with /dev/disk/by-id/ata-WDC_WD30EFRX-68EUZN0_WD-WCC4N4JC7Z2D: already in replacing/spare config; wait for completion or use 'zpool detach' hier steht etwas von ashift warum es nicht geht: https://www.truenas.com/community/threads/cannot-replace-disks-in-pool.91490/ habe das dann mal anzeigen lassen: zpool get ashift root@Tower:~# zpool get ashift NAME PROPERTY VALUE SOURCE QNAPZFS ashift 0 default QNAPZFS2 ashift 0 default die führen aber noch "zdb -C -U /data/zfs/zpool.cach" aus das gibt es bei Unraid aber nicht. was muss ich machen. OFF Thropic: Ich frag mich wie lange es bei Unraid noch dauert bis endlich eine ZFS GUI gibt. Danke im voraus. Edited January 8, 2023 by Soliver84 Quote Link to comment
Soliver84 Posted January 9, 2023 Author Share Posted January 9, 2023 was keiner hat eine idee? Quote Link to comment
Ford Prefect Posted January 9, 2023 Share Posted January 9, 2023 (edited) Mein ZFS ist etwas eingerostet, aber ich meine, Du hätttest die alte Disk nicht entfernen dürfen, sondern nur die Neue einbauen, dann replace und/oder resilver....aber keine Gewähr ;-). ...frag mal im ZFS Faden bei HWLuxx... -> https://www.hardwareluxx.de/community/threads/zfs-stammtisch.570052/ Edited January 9, 2023 by Ford Prefect Quote Link to comment
ich777 Posted January 9, 2023 Share Posted January 9, 2023 On 1/8/2023 at 7:53 PM, Soliver84 said: action: Replace the device using 'zpool replace'. Also, das wäre für mich deine Antwort, ist sogar ein Link dabei wo alles beschrieben ist, in dem Link steht wie alles genau gemacht gehört: Klick 12 hours ago, Soliver84 said: was keiner hat eine idee? Ich glaube nicht viele nutzen ZFS zumindest nicht aus DE -> der Stromspargedanke ist bei ZFS eben nicht gerade groß und ist ein ganz anderes Storage Konzept als bei Unraid. On 1/8/2023 at 7:53 PM, Soliver84 said: Ich frag mich wie lange es bei Unraid noch dauert bis endlich eine ZFS GUI gibt. Die basics kommen in der 6.12, aber erwarte noch nicht das ein Tausch der Platten dort über die GUI funktioniert. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.