resonator79 Posted January 10, 2023 Share Posted January 10, 2023 Hi, I'm getting warning I don't quite understand> Jan 10 03:42:58 AB-NAS1 kernel: ata4.00: failed command: READ FPDMA QUEUED Jan 10 03:42:58 AB-NAS1 kernel: ata4.00: cmd 60/40:30:78:e5:57/05:00:d2:06:00/40 tag 6 ncq dma 688128 in Jan 10 03:42:58 AB-NAS1 kernel: res 40/00:48:38:f5:57/00:00:d2:06:00/40 Emask 0x50 (ATA bus error) Jan 10 03:42:58 AB-NAS1 kernel: ata4.00: status: { DRDY } Jan 10 03:42:58 AB-NAS1 kernel: ata4.00: failed command: READ FPDMA QUEUED Jan 10 03:42:58 AB-NAS1 kernel: ata4.00: cmd 60/40:38:b8:ea:57/05:00:d2:06:00/40 tag 7 ncq dma 688128 in Jan 10 03:42:58 AB-NAS1 kernel: res 40/00:48:38:f5:57/00:00:d2:06:00/40 Emask 0x50 (ATA bus error) Jan 10 03:42:58 AB-NAS1 kernel: ata4.00: status: { DRDY } Jan 10 03:42:58 AB-NAS1 kernel: ata4.00: failed command: READ FPDMA QUEUED Jan 10 03:42:58 AB-NAS1 kernel: ata4.00: cmd 60/40:40:f8:ef:57/05:00:d2:06:00/40 tag 8 ncq dma 688128 in Jan 10 03:42:58 AB-NAS1 kernel: res 40/00:48:38:f5:57/00:00:d2:06:00/40 Emask 0x50 (ATA bus error) Jan 10 03:42:58 AB-NAS1 kernel: ata4.00: status: { DRDY } Jan 10 03:42:58 AB-NAS1 kernel: ata4.00: failed command: READ FPDMA QUEUED Jan 10 03:42:58 AB-NAS1 kernel: ata4.00: cmd 60/d8:48:38:f5:57/02:00:d2:06:00/40 tag 9 ncq dma 372736 in Jan 10 03:42:58 AB-NAS1 kernel: res 40/00:48:38:f5:57/00:00:d2:06:00/40 Emask 0x50 (ATA bus error) Jan 10 03:42:58 AB-NAS1 kernel: ata4.00: status: { DRDY } Jan 10 03:42:58 AB-NAS1 kernel: ata4.00: failed command: READ FPDMA QUEUED Jan 10 03:42:58 AB-NAS1 kernel: ata4.00: cmd 60/e8:50:10:f8:57/02:00:d2:06:00/40 tag 10 ncq dma 380928 in Jan 10 03:42:58 AB-NAS1 kernel: res 40/00:48:38:f5:57/00:00:d2:06:00/40 Emask 0x50 (ATA bus error) Jan 10 03:42:58 AB-NAS1 kernel: ata4.00: status: { DRDY } Jan 10 03:42:58 AB-NAS1 kernel: ata4: hard resetting link Jan 10 03:42:59 AB-NAS1 kernel: ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Jan 10 03:42:59 AB-NAS1 kernel: ata4.00: configured for UDMA/133 Jan 10 03:42:59 AB-NAS1 kernel: ata4: EH complete Jan 10 03:49:01 AB-NAS1 sSMTP[10090]: Creating SSL connection to host Jan 10 03:49:01 AB-NAS1 sSMTP[10090]: SSL connection using TLS_AES_256_GCM_SHA384 Jan 10 03:49:01 AB-NAS1 sSMTP[10090]: Authorization failed (535 5.7.8 https://support.google.com/mail/?p=BadCredentials v27-20020a17090606db00b0081d2d9a0b45sm4388771ejb.186 - gsmtp) Jan 10 05:24:01 AB-NAS1 kernel: pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0 Jan 10 05:24:01 AB-NAS1 kernel: pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) Jan 10 05:24:01 AB-NAS1 kernel: pcieport 0000:00:1c.0: device [8086:a338] error status/mask=00000001/00002000 Jan 10 05:24:01 AB-NAS1 kernel: pcieport 0000:00:1c.0: [ 0] RxErr Jan 10 05:24:01 AB-NAS1 kernel: ata4.00: exception Emask 0x50 SAct 0x7c000006 SErr 0x280900 action 0x6 frozen Jan 10 05:24:01 AB-NAS1 kernel: ata4.00: irq_stat 0x08000000, interface fatal error Jan 10 05:24:01 AB-NAS1 kernel: ata4: SError: { UnrecovData HostInt 10B8B BadCRC } Jan 10 05:24:01 AB-NAS1 kernel: ata4.00: failed command: READ FPDMA QUEUED Jan 10 05:24:01 AB-NAS1 kernel: ata4.00: cmd 60/40:08:58:ff:3b/05:00:26:07:00/40 tag 1 ncq dma 688128 in Jan 10 05:24:01 AB-NAS1 kernel: res 40/00:08:58:ff:3b/00:00:26:07:00/40 Emask 0x50 (ATA bus error) Jan 10 05:24:01 AB-NAS1 kernel: ata4.00: status: { DRDY } Jan 10 05:24:01 AB-NAS1 kernel: ata4.00: failed command: READ FPDMA QUEUED Jan 10 05:24:01 AB-NAS1 kernel: ata4.00: cmd 60/40:10:98:04:3c/05:00:26:07:00/40 tag 2 ncq dma 688128 in Jan 10 05:24:01 AB-NAS1 kernel: res 40/00:08:58:ff:3b/00:00:26:07:00/40 Emask 0x50 (ATA bus error) Jan 10 05:24:01 AB-NAS1 kernel: ata4.00: status: { DRDY } Jan 10 05:24:01 AB-NAS1 kernel: ata4.00: failed command: READ FPDMA QUEUED Jan 10 05:24:01 AB-NAS1 kernel: ata4.00: cmd 60/40:d0:d8:e9:3b/05:00:26:07:00/40 tag 26 ncq dma 688128 in Jan 10 05:24:01 AB-NAS1 kernel: res 40/00:08:58:ff:3b/00:00:26:07:00/40 Emask 0x50 (ATA bus error) Jan 10 05:24:01 AB-NAS1 kernel: ata4.00: status: { DRDY } Jan 10 05:24:01 AB-NAS1 kernel: ata4.00: failed command: READ FPDMA QUEUED Jan 10 05:24:01 AB-NAS1 kernel: ata4.00: cmd 60/40:d8:18:ef:3b/05:00:26:07:00/40 tag 27 ncq dma 688128 in Jan 10 05:24:01 AB-NAS1 kernel: res 40/00:08:58:ff:3b/00:00:26:07:00/40 Emask 0x50 (ATA bus error) Jan 10 05:24:01 AB-NAS1 kernel: ata4.00: status: { DRDY } Jan 10 05:24:01 AB-NAS1 kernel: ata4.00: failed command: READ FPDMA QUEUED Jan 10 05:24:01 AB-NAS1 kernel: ata4.00: cmd 60/40:e0:58:f4:3b/05:00:26:07:00/40 tag 28 ncq dma 688128 in Jan 10 05:24:01 AB-NAS1 kernel: res 40/00:08:58:ff:3b/00:00:26:07:00/40 Emask 0x50 (ATA bus error) Jan 10 05:24:01 AB-NAS1 kernel: ata4.00: status: { DRDY } Jan 10 05:24:01 AB-NAS1 kernel: ata4.00: failed command: READ FPDMA QUEUED Jan 10 05:24:01 AB-NAS1 kernel: ata4.00: cmd 60/40:e8:98:f9:3b/05:00:26:07:00/40 tag 29 ncq dma 688128 in Jan 10 05:24:01 AB-NAS1 kernel: res 40/00:08:58:ff:3b/00:00:26:07:00/40 Emask 0x50 (ATA bus error) Jan 10 05:24:01 AB-NAS1 kernel: ata4.00: status: { DRDY } Jan 10 05:24:01 AB-NAS1 kernel: ata4.00: failed command: READ FPDMA QUEUED Jan 10 05:24:01 AB-NAS1 kernel: ata4.00: cmd 60/80:f0:d8:fe:3b/00:00:26:07:00/40 tag 30 ncq dma 65536 in Jan 10 05:24:01 AB-NAS1 kernel: res 40/00:08:58:ff:3b/00:00:26:07:00/40 Emask 0x50 (ATA bus error) Jan 10 05:24:01 AB-NAS1 kernel: ata4.00: status: { DRDY } Jan 10 05:24:01 AB-NAS1 kernel: ata4: hard resetting link Jan 10 05:24:01 AB-NAS1 kernel: ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Jan 10 05:24:01 AB-NAS1 kernel: ata4.00: configured for UDMA/133 Jan 10 05:24:01 AB-NAS1 kernel: ata4: EH complete Jan 10 05:51:01 AB-NAS1 sSMTP[30973]: Creating SSL connection to host Jan 10 05:51:02 AB-NAS1 sSMTP[30973]: SSL connection using TLS_AES_256_GCM_SHA384 Jan 10 06:04:13 AB-NAS1 kernel: md: sync done. time=145046sec Jan 10 06:04:13 AB-NAS1 kernel: md: recovery thread: exit status: 0 Jan 10 06:05:01 AB-NAS1 sSMTP[21849]: Creating SSL connection to host Jan 10 06:05:02 AB-NAS1 sSMTP[21849]: SSL connection using TLS_AES_256_GCM_SHA384 Jan 10 06:14:03 AB-NAS1 kernel: pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0 Jan 10 06:14:03 AB-NAS1 kernel: pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) Jan 10 06:14:03 AB-NAS1 kernel: pcieport 0000:00:1c.0: device [8086:a338] error status/mask=00000001/00002000 Jan 10 06:14:03 AB-NAS1 kernel: pcieport 0000:00:1c.0: [ 0] RxErr Jan 10 06:27:24 AB-NAS1 kernel: pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0 Jan 10 06:27:24 AB-NAS1 kernel: pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) Jan 10 06:27:24 AB-NAS1 kernel: pcieport 0000:00:1c.0: device [8086:a338] error status/mask=00000001/00002000 Jan 10 06:27:24 AB-NAS1 kernel: pcieport 0000:00:1c.0: [ 0] RxErr Jan 10 06:49:47 AB-NAS1 kernel: pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0 Jan 10 06:49:47 AB-NAS1 kernel: pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) Jan 10 06:49:47 AB-NAS1 kernel: pcieport 0000:00:1c.0: device [8086:a338] error status/mask=00000001/00002000 Jan 10 06:49:47 AB-NAS1 kernel: pcieport 0000:00:1c.0: [ 0] RxErr Jan 10 07:19:27 AB-NAS1 kernel: pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0 Jan 10 07:19:27 AB-NAS1 kernel: pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) Jan 10 07:19:27 AB-NAS1 kernel: pcieport 0000:00:1c.0: device [8086:a338] error status/mask=00000001/00002000 Jan 10 07:19:27 AB-NAS1 kernel: pcieport 0000:00:1c.0: [ 0] RxErr [8086:a338] 00:1c.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #1 (rev f0) I did a Parity Check, ahead of upgrading one of the array drives, and I got like ~20 UDMA CRC error on three drives, one of them just a few weeks old. Does this mean the motherboard is failing?! The SATA controller for these three drives is the onboard controller. Can anybody enlighten me? Thx! Quote Link to comment
trurl Posted January 10, 2023 Share Posted January 10, 2023 Attach Diagnostics to your NEXT post in this thread Quote Link to comment
resonator79 Posted January 10, 2023 Author Share Posted January 10, 2023 Of course, sorry. Thank you! ab-nas1-diagnostics-20230110-1446.zip Quote Link to comment
JorgeB Posted January 10, 2023 Share Posted January 10, 2023 7 hours ago, resonator79 said: { UnrecovData HostInt 10B8B BadCRC } This is usually a bad SATA cable, replace it, ata4 is parity. 7 hours ago, resonator79 said: AER: Corrected error received: For those try this: https://forums.unraid.net/topic/118286-nvme-drives-throwing-errors-filling-logs-instantly-how-to-resolve/?do=findComment&comment=1165009 Quote Link to comment
resonator79 Posted January 10, 2023 Author Share Posted January 10, 2023 Yeah, I've already ordered some new cables, I figured it might be the cause. Thank you for the tip about pcie_aspm=off. I will try that. Quote Link to comment
resonator79 Posted January 11, 2023 Author Share Posted January 11, 2023 So today I replaced all SATA cables with brand new ones (Sabrant, brand type ones), and I triple checked all of them as to whether they the connectors are seated right. Did they array rebuild / HDD upgrade, and again - 3 drives with CRC new errors within minutes. Jan 11 18:53:04 AB-NAS1 kernel: ata4.00: exception Emask 0x50 SAct 0x4 SErr 0x280900 action 0x6 frozen Jan 11 18:53:04 AB-NAS1 kernel: ata4.00: irq_stat 0x08000000, interface fatal error Jan 11 18:53:04 AB-NAS1 kernel: ata4: SError: { UnrecovData HostInt 10B8B BadCRC } Jan 11 18:53:04 AB-NAS1 kernel: ata4.00: failed command: READ FPDMA QUEUED Jan 11 18:53:04 AB-NAS1 kernel: ata4.00: cmd 60/40:10:48:82:fe/05:00:10:00:00/40 tag 2 ncq dma 688128 in Jan 11 18:53:04 AB-NAS1 kernel: res 40/00:00:48:82:fe/00:00:10:00:00/40 Emask 0x50 (ATA bus error) Jan 11 18:53:04 AB-NAS1 kernel: ata4.00: status: { DRDY } Jan 11 18:53:04 AB-NAS1 kernel: ata4: hard resetting link Jan 11 18:53:04 AB-NAS1 kernel: ata5.00: exception Emask 0x50 SAct 0x2 SErr 0x280900 action 0x6 frozen Jan 11 18:53:04 AB-NAS1 kernel: ata5.00: irq_stat 0x08000000, interface fatal error Jan 11 18:53:04 AB-NAS1 kernel: ata5: SError: { UnrecovData HostInt 10B8B BadCRC } Jan 11 18:53:04 AB-NAS1 kernel: ata5.00: failed command: READ FPDMA QUEUED Jan 11 18:53:04 AB-NAS1 kernel: ata5.00: cmd 60/40:08:48:82:fe/05:00:10:00:00/40 tag 1 ncq dma 688128 in Jan 11 18:53:04 AB-NAS1 kernel: res 40/00:00:48:82:fe/00:00:10:00:00/40 Emask 0x50 (ATA bus error) Jan 11 18:53:04 AB-NAS1 kernel: ata5.00: status: { DRDY } Jan 11 18:53:04 AB-NAS1 kernel: ata5: hard resetting link Jan 11 18:53:04 AB-NAS1 kernel: ata1.00: exception Emask 0x50 SAct 0x10000000 SErr 0x280900 action 0x6 frozen Jan 11 18:53:04 AB-NAS1 kernel: ata1.00: irq_stat 0x08000000, interface fatal error Jan 11 18:53:04 AB-NAS1 kernel: ata1: SError: { UnrecovData HostInt 10B8B BadCRC } Jan 11 18:53:04 AB-NAS1 kernel: ata1.00: failed command: READ FPDMA QUEUED Jan 11 18:53:04 AB-NAS1 kernel: ata1.00: cmd 60/40:e0:48:82:fe/05:00:10:00:00/40 tag 28 ncq dma 688128 in Jan 11 18:53:04 AB-NAS1 kernel: res 40/00:00:48:82:fe/00:00:10:00:00/40 Emask 0x50 (ATA bus error) Jan 11 18:53:04 AB-NAS1 kernel: ata1.00: status: { DRDY } Jan 11 18:53:04 AB-NAS1 kernel: ata1: hard resetting link Jan 11 18:53:04 AB-NAS1 kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Jan 11 18:53:04 AB-NAS1 kernel: ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Jan 11 18:53:04 AB-NAS1 kernel: ata4.00: supports DRM functions and may not be fully accessible Jan 11 18:53:04 AB-NAS1 kernel: ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Jan 11 18:53:04 AB-NAS1 kernel: ata4.00: supports DRM functions and may not be fully accessible Jan 11 18:53:04 AB-NAS1 kernel: ata5.00: configured for UDMA/133 Jan 11 18:53:04 AB-NAS1 kernel: ata5: EH complete Jan 11 18:53:04 AB-NAS1 kernel: ata4.00: configured for UDMA/133 Jan 11 18:53:04 AB-NAS1 kernel: ata4: EH complete Jan 11 18:53:04 AB-NAS1 kernel: ata1.00: configured for UDMA/133 Jan 11 18:53:04 AB-NAS1 kernel: ata1: EH complete I don't know what to do. I guess the board is dying?! Quote Link to comment
JorgeB Posted January 11, 2023 Share Posted January 11, 2023 Could be, you can try using an add-on controller if you have one available. Quote Link to comment
resonator79 Posted January 20, 2023 Author Share Posted January 20, 2023 (edited) So, it turns out it was merely ONE defective drive in the array; it went to "disabled" on its own a few days after the rebuild, after which I replaced it with a new one, and all of a sudden ALL the UDMA errors on the other drives just stopped. I rebuilt the array again, no errors during that "stress" on the system, and now the system's been up and running for a few days ... no more errors. Edited January 20, 2023 by resonator79 3 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.