MendipMan Posted February 11, 2023 Share Posted February 11, 2023 (edited) HI, I hope someone can help me with this. Last night I had a power cut. Everything was going fine until I tried to start the Array back up. I click the button and it starts bringing the array online but then crashes at the 'Starting Array' part and the only way I can get back into the server is a hard reboot. Version: 6.9.2 Things Ive tried. Boot into Safe mode: Works but cant start the Array. Start Array in Maintenance mode: Works and I have checked and repaired all the Array drives. Array still wont start Checked the flash drive in windows with chkdsk: No errors found. I have included my diagnostics file. E2A: Removed redundant log. Edited February 11, 2023 by MendipMan Quote Link to comment
Frank1940 Posted February 11, 2023 Share Posted February 11, 2023 I doubt if the diagnostics file is going to show much. What I would suggest you do is setup the syslog server to mirror the syslog to the flash drive. Then upload the syslog file (in a new post in this thread/topic) after you arrange for a crash to occur. The instructions are in this post: https://forums.unraid.net/topic/46802-faq-for-unraid-v6/page/2/?tab=comments#comment-781601 1 Quote Link to comment
MendipMan Posted February 11, 2023 Author Share Posted February 11, 2023 Hi, Thanks for getting back to me. Heres the syslog from the flash drive after a crash. syslog Quote Link to comment
MendipMan Posted February 11, 2023 Author Share Posted February 11, 2023 (edited) When I copied off the syslog last time from the flash drive windows said it had an error and needed to be repaired. I did this and tried to start the server again just in case it was an error with the flash drive. Same problem, hangs halfway through starting the array so I left it for ten minutes to see if I could capture anymore data before shutting it down. This time the syslog is a lot bigger so I have attached it to this post. Last line in the log is trying to load the dynamix.system.stats plugin. WebGUI shows all drive as working properly. syslog Edited February 11, 2023 by MendipMan Quote Link to comment
MendipMan Posted February 11, 2023 Author Share Posted February 11, 2023 OK removed the dynamix.system.stats plugin via the WebGUI. Array still wont start. looking at the syslog the problem now seems to be soemthing to do with the network card. New syslog attached. syslog Quote Link to comment
trurl Posted February 11, 2023 Share Posted February 11, 2023 Do you have a current backup of flash? Quote Link to comment
Solution MendipMan Posted February 11, 2023 Author Solution Share Posted February 11, 2023 (edited) Turns out the system.stats plugin and the system.temps plugins were corrupted. Removed them and the Array is back online! Still have no idea how or why they corrupted and why when I reinstalled them it still didnt work but hey ho I can live without both so its all good. Edited February 11, 2023 by MendipMan Quote Link to comment
MendipMan Posted February 11, 2023 Author Share Posted February 11, 2023 23 minutes ago, trurl said: Do you have a current backup of flash? Yup! The stick gets backed up to a seperate machine at the slightest hint of any trouble. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.