Vosco Posted February 14, 2023 Share Posted February 14, 2023 Okay, a few weeks ago, my usb got corrupted. I tried to changed usb sticks, well when I booted up, my server told me my key did not match my usb stick. Long story short, I ended up contacting customer support for help, which they did. The problem I had was, once I had the right usb to match the key. I downloaded it and then My server disconnected, and I could not log back in. I emailed customer support to help, but I could not give any information excepted, my server boots up and I just cant connect to it. This weekend I tried to fix my server again with more understanding and this morning, before I could paste the url to download the key, I lost connection again. So now Im thinking there is something happening between acquiring a key and downloading it that is no longer allowing my server to connect to the internet. I used a PNY brand flash drive both times. I followed all the steps. I even tried a flash drive that was blacklisted and it booted fine and it told me it was blacklisted. so I don't think that is the problem. has anyone had this issue and is there something that I could be doing wrong. I appreciate and help and advice, thanks. I'm stuck Quote Link to comment
JorgeB Posted February 14, 2023 Share Posted February 14, 2023 Do you meant you connect connect to the GUI or just MyServers is not working? Also please post the diagnostics. Quote Link to comment
Vosco Posted February 14, 2023 Author Share Posted February 14, 2023 My bag for not being clear. Here are the steps and results I have gotten. On the main tab, I click registration key. Then where it says replace key, my screen says fix, which takes me to the top right corner, where I clicked replace key, which then sends me to the myserver sign in. When I try to sign in it tells my guid is blacklisted. I contact costumer support and they sent me key to match the actual usb I have in my computer.(note: the myserver guid does not match the actual guid that is showing on my server) Now when I went to paste the url, I was disconnected from the gui. I'm not sure how to post my diagnostics, because I can not connect to my ip I did reboot and everything booted as normal. Is there something I can do there? OOOH maybe I should try safe mode. I'll try that when I get home Quote Link to comment
JorgeB Posted February 15, 2023 Share Posted February 15, 2023 12 hours ago, Vosco said: I contact costumer support and they sent me key to match the actual usb Replace the current key in the flash drive (/config folder) with the one support sent and you should be all set. Quote Link to comment
Vosco Posted February 16, 2023 Author Share Posted February 16, 2023 thanks, when I get home I will do. It will be afew days though, but i'll keep you posted thanks again Quote Link to comment
Vosco Posted February 27, 2023 Author Share Posted February 27, 2023 okay, its been awhile, but I'm back. I just booted my server in safe mode. and downloaded the diagnostics. i have not started my server yet. i wanted to download before i lost connection tower-diagnostics-20230226-2144.zip Quote Link to comment
trurl Posted February 27, 2023 Share Posted February 27, 2023 Feb 26 18:41:07 Tower emhttpd: Pro key detected, GUID: 1..1 FILE: /boot/config/Pro.key Do you still have some problem? Quote Link to comment
Vosco Posted February 28, 2023 Author Share Posted February 28, 2023 One of my drives is showing bad. I am able to gain to see my gui in safe mode. I tried to start my array and I lost connection. Im going to remove the drive that is bad and I think I should be good. thanks Quote Link to comment
trurl Posted February 28, 2023 Share Posted February 28, 2023 SMART report for disabled disk2 looked fine. Probably not the reason for your problem. And your array is degraded whether or not you remove the disk. You have to rebuild it or New Config without the disk and rebuild parity. Did disk2 have any data on it? Can't tell if emulated disk2 mounts since you haven't been able to start the array. Setup syslog server. Quote Link to comment
Vosco Posted March 14, 2023 Author Share Posted March 14, 2023 I got tired of messing with this. I made a new boot disk, started a trial mode, removed the bad disk. mounted my parity disk. the question I have now is when I start my array, with the missing drive, will the parity disk build the array with the info on the bad on the remaining disk that I have or do I have to replace that drive with another disk before I push start Quote Link to comment
JorgeB Posted March 14, 2023 Share Posted March 14, 2023 If you are starting from a new config the missing disk will not be rebuilt. Quote Link to comment
trurl Posted March 14, 2023 Share Posted March 14, 2023 5 hours ago, Vosco said: mounted my parity disk Parity doesn't have a filesystem to mount, so I assume you just mean parity is installed. Did you build parity without the missing disk? If so, no way it can rebuild the missing disk. On 2/28/2023 at 8:23 AM, trurl said: Did disk2 have any data on it? If you didn't start the array and build parity yet, then we may be able to get it to emulate the missing disk. Quote Link to comment
Vosco Posted March 14, 2023 Author Share Posted March 14, 2023 connected the bad drive to the server and it is fine. started the array and Im good to go. just have to transfer my key. Still trying to figure what went wrong. Has to have something to do with the usb drive i was using Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.