Nexius2 Posted May 25, 2023 Share Posted May 25, 2023 Hello, I've had a HDD failure, no big deal, I replace it and rebuild starts. during the rebuild, second HDD fails (lets hope no other on fail). no big deal, I ordered a new one and will change it when the rebuild of the first hdd will be over. but the rebuild process is stuck at 45.9%... I have seen it continue because hdd are reading and writting but the % doesn't change. now it looks like it is finished because no more read / writes, but process still going. so I can't stop array or reboot. any help? thanks nostromo-diagnostics-20230525-1448.zip Quote Link to comment
JorgeB Posted May 25, 2023 Share Posted May 25, 2023 Disk21 dropped offline and reconnected, SMART looks good, and this is usually a power/connection problem, check/replace cables and you can rebuild both at the same time. Quote Link to comment
Nexius2 Posted May 25, 2023 Author Share Posted May 25, 2023 thanks for the answer. when the hdd are offline, we can't see smart so I didn't see that. anyway, if i wanted to check cable or so, i would need to turn server off. and rebuild prevents from shutting down. Quote Link to comment
JorgeB Posted May 25, 2023 Share Posted May 25, 2023 Do you have an option in the GUI to cancel the rebuild? Syslog shows the rebuild finished but other diags show it's still going, kind of strange. Quote Link to comment
Nexius2 Posted May 25, 2023 Author Share Posted May 25, 2023 it's been like that since yesterday. I kown it's finished, there is no more disk read / write but I'd like to stop the array and shutdown to change HDD Quote Link to comment
Solution JorgeB Posted May 25, 2023 Solution Share Posted May 25, 2023 Click reboot and post new diags after array start. Quote Link to comment
Nexius2 Posted May 26, 2023 Author Share Posted May 26, 2023 seem ok, it started a partity check... nostromo-diagnostics-20230526-0749.zip Quote Link to comment
itimpi Posted May 26, 2023 Share Posted May 26, 2023 According to the diagnostics an unclean shutdown had happened: May 26 07:46:50 Nostromo emhttpd: unclean shutdown detected and later this May 26 07:48:20 Nostromo kernel: mdcmd (37): check correct showing a correcting check was initiated which is not normal after an unclean shutdown (unless you started one manually). No idea why though. Quote Link to comment
JorgeB Posted May 26, 2023 Share Posted May 26, 2023 You can cancel the check and rebuild disk21 instead. Quote Link to comment
Nexius2 Posted May 26, 2023 Author Share Posted May 26, 2023 I had a probleme with a card that froz the server (unreachable and no GUI displaying) that explains the unclean shutdown it seemed ok after reboot but I guess not 😕 Thanks for you help Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.