Nexius2

Members
  • Posts

    152
  • Joined

  • Last visited

Everything posted by Nexius2

  1. sometimes, shares are on different pools. when copying data, files could be written on wrong pool (because it's just a share anyways). so wildcard would be great. Best exemple a data share with a pool and a backup share with it's own pool... All I would need is that mover put's the file where I ask him to no matter where it was. I'll have a look at the discussion. thanks
  2. Hello, very often, the "fix common problems" plugin tels me I have data on a pool that's not supposed to be there. and therefor, it won't end on the array or the right pool. what I would like is, in the share settings, to be able to set the primary storage as a wildcard, meaning, where ever the file is, it will end up on secondary storage at next move.
  3. rebuilding docker img did the job. thanks
  4. nothing has been changed and it worked perfectly before. I checked anyways, that is not it. every port is unique. I tried reinstalling the container, it won't work. I will try docker img delete
  5. Hello, My cache drive filled up which stopped mo docker containers and caused a error 403 when trying to start them. I emptied my cache and could not restart the containers, same error. and I don't understand why i couldn't restart them as my cache whas empty. so I restarted the server. now, some containers started and others have just error and won't start. any guess? nostromo-diagnostics-20240102-0813.zip
  6. disk 25 was unusable, rebuild not complet. I reset the config, put back the old disk, changed cables for 6 and 19. checked all disks individually then rebuilt both parity. everything is ok now, going to cahnge again for disk 25 thanks
  7. I must be missing something. if I replace disk 25 with wathever, have disk 6 and 19 emulated, and reset the config, how is it supposed to emulate and repair 3 disks?
  8. ok, I'll give it a try. but when you say unassign disk 25, I need to put the old disk instead right? I was searching how to mount a disk without starting the array and on a disk that is disabled. how can it be done with UD? can't find out 🙂 thanks
  9. as parity can't be valid after the reboot (rebuild disk marked as ok but has not even half the data on it), I decided to try copying data from failing disks to new ones. after a preclear, I can format and mount new disks. but is there a way to mount disks from a stopped array that are disabled? I have hear of Unassigned device that could do it, but couldn't figure out how. thanks
  10. how can i force enable them? and how can i launch the rebuild again since it thinks the rebuild is over? thanks
  11. the server rebooted. but it says rebuild is finished (with lots of errors) I think it was disk 25. I didn't start the array yet but I guess i can't swap back since it is a 18To and the old was an 8To. Disks 6 and 19 where moved but bad power or connexion problem, they are now disabled. don't know what to do 😕 nostromo-diagnostics-20231203-1736.zip
  12. doesn't seem like I can cancel it... nothing happens and i don't see it in the logs. is there a command line to stop rebuild? logs are full, it might explain why i can't cancel rebuild or do anything. df -h /var/log Filesystem Size Used Avail Use% Mounted on tmpfs 128M 128M 0 100% /var/log nostromo-diagnostics-20231203-0935.zip
  13. what I was thinking for now. - get 2 new hdd - preclear them - copy data from crached HDD to new one (don't know exactly how for now) - replace failed hdd with the new ones - replace the hdd that was rebuilding with the old one - reset the config to loose my 2 parity disks - let it rebuild the parity - cross my fingers very hard this methode will take a very long time (couple days / weeks) and doesn't explain the loss of shares (and i think data on disks that are fine)
  14. Hello, bad morning for me today. I started rebuilding a disk early this week to upgrade. the data rebuild has not finished yet. during the night, 2 other HDD failed... no luck... I have 2 parity HDD but with the one that was rebuilding, I guess that takes the count to 3.... so my array doesn't like it. my shares don't all show up, for example, I can't see the appdata (wich is on a cache so???) can someone help to get this back up with minimum data loss? thanks nostromo-diagnostics-20231202-1001.zip
  15. thanks, I'll give that a try
  16. server crashed again 😞 nostromo-diagnostics-20230912-1624.zip syslog-192.168.1.80.log
  17. just changed that and it's now ok, thanks my second server crashed this morning. is it me or are we many to have server crash without reason in the last months? I personnaly never had issues and on day both started crashing at a rate of every 10-15 days, sometimes a bit more...
  18. thanks, i'll try that. enabled the syslog but nothing in system share, doing something wrong?
  19. Hello, since 2-3 months, my two unraid servers are crashing regularly and both seem the have similar crash. last in date yesterday, around 3AM. on this server, it just stopped answering yesterday, no ping, no gui, no terminal on screen, nothing. but last time, some containers stopped working (I guessed because of a mounted share, that causses me issues everytime I want to reboot), then GUI stopped responding but I managed to make it reboot via terminal. I can't find anything in the logs, maybe could someone help. nostromo-diagnostics-20230827-1200.zip
  20. I had a probleme with a card that froz the server (unreachable and no GUI displaying) that explains the unclean shutdown it seemed ok after reboot but I guess not 😕 Thanks for you help
  21. seem ok, it started a partity check... nostromo-diagnostics-20230526-0749.zip
  22. it's been like that since yesterday. I kown it's finished, there is no more disk read / write but I'd like to stop the array and shutdown to change HDD
  23. thanks for the answer. when the hdd are offline, we can't see smart so I didn't see that. anyway, if i wanted to check cable or so, i would need to turn server off. and rebuild prevents from shutting down.
  24. Hello, I've had a HDD failure, no big deal, I replace it and rebuild starts. during the rebuild, second HDD fails (lets hope no other on fail). no big deal, I ordered a new one and will change it when the rebuild of the first hdd will be over. but the rebuild process is stuck at 45.9%... I have seen it continue because hdd are reading and writting but the % doesn't change. now it looks like it is finished because no more read / writes, but process still going. so I can't stop array or reboot. any help? thanks nostromo-diagnostics-20230525-1448.zip
  25. On a first attempt, all disk where all encrypted and unmounted (like it didn't un-encrypt at start) and nothing talks about that in the online manual. so I prefere asking. but it seems I had the right process. I'll try again. I'm putting 2 18To parity so I can upgrade other disks to that capacity, that's why I have to