xHorn Posted June 20, 2023 Share Posted June 20, 2023 This is one of those times where I did a bit of research, tried a few things, but fear that if I do much more myself I may cause more harm than good. So, I humbly ask the community for help. - Docker and VM's both worked before update - Update restarted the machine, Docker and VM's never came back up. - After some research, I thought it apropos to delete docker.img (through docker settings) - No new docker.img gets created. oilpan-diagnostics-20230619-1932.zip Quote Link to comment
trurl Posted June 20, 2023 Share Posted June 20, 2023 Connection problems with cache, probably corrupt filesystem as a result. Quote Link to comment
xHorn Posted June 20, 2023 Author Share Posted June 20, 2023 Solution? I've got CA backing up the cache appdata to an external at the moment, but what next? Quote Link to comment
JorgeB Posted June 20, 2023 Share Posted June 20, 2023 Replace cables for cache1 and post new diags after array start. Quote Link to comment
xHorn Posted June 20, 2023 Author Share Posted June 20, 2023 Any chance someone could show me which part of the diagnostics are indicating this? That might make it easier for me to troubleshoot the connection. All cache's look fine on the Unraid "Main" page, so I'm just wondering how to know when I've gotten a bit further in troubleshooting Quote Link to comment
trurl Posted June 20, 2023 Share Posted June 20, 2023 1 hour ago, xHorn said: which part of the diagnostics are indicating this? syslog starting here and all the way to the end: Jun 19 19:31:27 OILPAN kernel: ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Quote Link to comment
xHorn Posted June 20, 2023 Author Share Posted June 20, 2023 Well, a new cable hasn't worked. Kinda bummed that I updated now, she's been rock steady for 2 years! Seeing that I have two cache drives in a pool (the available file size is somewhere between both drive sizes) would I be able to just remove one and run on the other for now without losing data? Quote Link to comment
itimpi Posted June 20, 2023 Share Posted June 20, 2023 30 minutes ago, xHorn said: would I be able to just remove one and run on the other for now without losing data? Only if the pool is set up to provide redundancy (i.e. RAID1). Your comment on size suggests this may not be the case. If you provide your system's diagnostics zip file then we can check for you. Quote Link to comment
JorgeB Posted June 21, 2023 Share Posted June 21, 2023 23 hours ago, JorgeB said: post new diags after array start. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.