Archonite Posted July 1, 2023 Share Posted July 1, 2023 Hi everyone, I have an old VGA monitor that I plug into my server. It's a really small form factor (like 13") and fits in the server closet amazingly. Is there a way to force the resolution output of the Unraid command line OS when plugging directly in the server? I'm getting a signal out of range warning on the monitor. Thanks! Quote Link to comment
Squid Posted July 1, 2023 Share Posted July 1, 2023 Curious if the BIOS even allows you to enter into it with that monitor? Quote Link to comment
Archonite Posted July 1, 2023 Author Share Posted July 1, 2023 Just tried it, it does but also outputs with a Signal Out Of Range. Quote Link to comment
Squid Posted July 1, 2023 Share Posted July 1, 2023 Interesting. Over my life, that is the second motherboard / monitor combination I've seen that acts that way. First thing would be to hook up a different monitor and then reconfigure the flash drive to boot via UEFI (rename EFI~ to be EFI on the flash drive) and then reconfigure the BIOS to boot via UEFI from the flash and go from there. 1 Quote Link to comment
JonathanM Posted July 4, 2023 Share Posted July 4, 2023 On 7/1/2023 at 11:37 AM, Archonite said: Just tried it, it does but also outputs with a Signal Out Of Range. Another thing to try would be a different VGA cable. Some cables don't have the pins connected that transmit the monitor ID back to the board. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.