ecogeek Posted August 20, 2023 Share Posted August 20, 2023 I have two 128G SSD drives that I'm using for cache. (I know it's not a lot, but it's what I have). The bios sees them and Tools->system devices sees them. /dev/sda and dev/sdb However, I'm only allowed to use one of them for my cache. (It can change too. I recently rebooted and it used sda and previously it used sdb) How can I get it to use both so I can have redundancy in my cache? Thanks! tower-diagnostics-20230819-2359.zip Quote Link to comment
itimpi Posted August 20, 2023 Share Posted August 20, 2023 Have you checked that the number of slots for the cache pool is set to 2 and that the file system is set to be btrfs (or ZFS if using the 6.12.x release). What happens when you try to assign the second drive? FYI: The sdX type designations are irrelevant as Unraid recognises disks by their serial number. Quote Link to comment
ecogeek Posted August 20, 2023 Author Share Posted August 20, 2023 I was pretty sure it was two, but I double checked and it is indeed set to two. It is BTRFS. It just says unassigned and doesn't have an option to add the other drive. I get that, but it was relevant for showing that it physically saw the drive. Quote Link to comment
Solution JorgeB Posted August 20, 2023 Solution Share Posted August 20, 2023 Aug 19 16:42:31 Tower emhttpd: device /dev/sda problem getting id This means there's a duplicate ID, this can happen with some USB bridges, they don't pass-through the device's complete ID and serial number, you'll need use a different one (at least for one of the devices) or use SATA. Quote Link to comment
ecogeek Posted August 20, 2023 Author Share Posted August 20, 2023 (edited) So try plugging it into a different usb slot? Or I wonder if I'll always get this because the drives are the same kind and if its not getting the complete ID it wont' work at all? In any case I'll try a different port. Unfortunately without moving the usb stick with the OS on it, I only have one other free port. But it is on the front so that might be different enough. I'll report back. Edited August 20, 2023 by ecogeek Quote Link to comment
trurl Posted August 20, 2023 Share Posted August 20, 2023 USB not recommended for pools or array for many reasons, including the problem you are experiencing. Quote Link to comment
ecogeek Posted August 20, 2023 Author Share Posted August 20, 2023 Well that didn't work. Am I just stuck with an SSD I can't use? Quote Link to comment
trurl Posted August 20, 2023 Share Posted August 20, 2023 1 hour ago, JorgeB said: use SATA Quote Link to comment
ecogeek Posted August 20, 2023 Author Share Posted August 20, 2023 11 minutes ago, trurl said: I don't have a sata port available to I'm going to have to find a better or different USB enclosure unfortunately Quote Link to comment
trurl Posted August 20, 2023 Share Posted August 20, 2023 16 minutes ago, ecogeek said: different USB enclosure 50 minutes ago, trurl said: USB not recommended for pools or array for many reasons, including the problem you are experiencing. Quote Link to comment
JorgeB Posted August 20, 2023 Share Posted August 20, 2023 1 hour ago, ecogeek said: So try plugging it into a different usb slot? It's not the USB slot, you'd need a different USB to SATA adapter. Quote Link to comment
ecogeek Posted August 20, 2023 Author Share Posted August 20, 2023 29 minutes ago, JorgeB said: It's not the USB slot, you'd need a different USB to SATA adapter. This is what I'm going to try. First I'm going to try a two slot enclosure and if that doesn't work, a different brand of single for one of the drives. Quote Link to comment
ecogeek Posted August 20, 2023 Author Share Posted August 20, 2023 That worked. I got an enclosure that takes both drives and puts it in one usb spot. I'm good, that was it. Quote Link to comment
trurl Posted August 21, 2023 Share Posted August 21, 2023 Don't be surprised if you experience additional problems if you continue to use USB for pools or array. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.