Unable to access dockers

[Kodiak51103]

Hello,

 

I am unable to access my dockers some are stop other show running. Either way I cannot access them or stop or start them. If I reboot I can access them for a couple of minutes. Under fix common problems shows this. Also attaching Diagnostics Thanks. The cache_nvme drive is where the dockers are stored and it is not full.

 

diagnostics.zip

Edited September 5, 2023 by suppressed-equinox8178

[Squid]

Sep  4 12:29:35 DeathStar kernel: BTRFS info (device loop2): bdev /dev/loop2 errs: wr 0, rd 0, flush 0, corrupt 5, gen 0

First thing to do is to run a memtest from the boot menu for at least a couple of passes.  Most causes of "Corrupt" is due to bad memory.  

 

If you're booting via UEFI, then you will need to temporarily switch to legacy boot or set up a new memtest stick via https://www.memtest86.com

[Kodiak51103]

Thanks for the help. So I ran the test and Got errors right way so I pulled one 16gm stick left the other one in now the test is showing no errors but same issue. Fix common problems now showing this: drive should not be ready-only and is not full currently at 78%?

[JorgeB]

Cache filesystem is corrupt, you should backup and re-format, also a good idea to run memtest.

[Kodiak51103]

Just double checking are we talking about the ssd drive where the dockers are located or usb drive where unraid is. Thanks

[JorgeB]

SSD.

[Kodiak51103]

So I may have messed up I moved everything off the ssd to the array then formatted the ssd. Moved everything back but I have no dockers installed. Should I just reinstalled them? I did make a back of the flash drive if that helps? Thanks

[JorgeB]

If you still have the appdata you can just recreate the image:

https://forums.unraid.net/topic/57181-docker-faq/?do=findComment&comment=564309

 

[Kodiak51103]

Thanks for all the help!