Unraid crashing

[dfox1787]

Hi 

 

My unraid server has started crashing after starying the array. Its been stable for months. 

When it crashes I can ping the server but cannot SSH. I have connected up a monitor and this what i get on the gui. 

any help would be appreciated 

media-diagnostics-20231012-1432.zip

[JorgeB]

Take a look here, if it doesn't help enable the syslog server and post that after a crash.

[dfox1787]

2 hours ago, JorgeB said:

Take a look here, if it doesn't help enable the syslog server and post that after a crash.

thank you. I cannot see any options in BIOS for th C states. 
 

Unraid only crashes when the array has been stared

[JorgeB]

Then do this:

2 hours ago, JorgeB said:

enable the syslog server and post that after a crash.

 

[dfox1787]

12 minutes ago, JorgeB said:

Then do this:

 

Its enabled where are the logs saved? Found this file on flash

syslog

[JorgeB]

Check filesystem on disk4, run it without -n

[dfox1787]

16 minutes ago, JorgeB said:

Check filesystem on disk4, run it without -n

so far so good. Ive had a look at the log file and see how you spotted that. 

ill let you know if if i have any issues. 

 

Thank you 

[dfox1787]

19 hours ago, JorgeB said:

Check filesystem on disk4, run it without -n

sorry still having proiblems. It has been fine up untill this afternoon. 

syslog

[JorgeB]

Oct 13 06:10:49 MEDIA kernel: macvlan_broadcast+0x10a/0x150 [macvlan]
Oct 13 06:10:49 MEDIA kernel: ? _raw_spin_unlock+0x14/0x29
Oct 13 06:10:49 MEDIA kernel: macvlan_process_broadcast+0xbc/0x12f [macvlan]

Macvlan call traces will usually end up crashing the server, switching to ipvlan should fix it (Settings -> Docker Settings -> Docker custom network type -> ipvlan (advanced view must be enabled, top right)).
 

[dfox1787]

On 10/13/2023 at 2:35 PM, JorgeB said:

Oct 13 06:10:49 MEDIA kernel: macvlan_broadcast+0x10a/0x150 [macvlan]
Oct 13 06:10:49 MEDIA kernel: ? _raw_spin_unlock+0x14/0x29
Oct 13 06:10:49 MEDIA kernel: macvlan_process_broadcast+0xbc/0x12f [macvlan]

Macvlan call traces will usually end up crashing the server, switching to ipvlan should fix it (Settings -> Docker Settings -> Docker custom network type -> ipvlan (advanced view must be enabled, top right)).
 

still having issues. Sometimes now i can access webui but i can ssh

syslog (1)

[JorgeB]

Nothing more relevant logged, suggesting a hardware issue, make sure this has been taken care of.

[dfox1787]

On 10/18/2023 at 2:42 PM, JorgeB said:

Nothing more relevant logged, suggesting a hardware issue, make sure this has been taken care of.

It's currently running but no access to the GUI. Plex is running and all the other docker containers 

[dfox1787]

On 10/18/2023 at 2:42 PM, JorgeB said:

Nothing more relevant logged, suggesting a hardware issue, make sure this has been taken care of.

Works fine in maintenance mode. I cleared the log file yesterday and its already nearly 4gb in size. When i get home ill take a look at it. 

[dfox1787]

On 10/18/2023 at 2:42 PM, JorgeB said:

Nothing more relevant logged, suggesting a hardware issue, make sure this has been taken care of.

Still not Gui access with array started, Fine in maintenance mdoe 

syslog (2)

[JorgeB]

Boot in safe mode to rule out plugin issues, Tailscale for example is known to cause this.

[dfox1787]

On 10/26/2023 at 7:15 PM, JorgeB said:

Boot in safe mode to rule out plugin issues, Tailscale for example is known to cause this.

i think its defo a issue with the hard drives. 

I have a HBA card into the PCE 16x slot. I have already swapped the HBA card but i am still getting errors with SOME of the drives. I have put a problamic drive into one of the sata ports and so far its fine.  Its still rebuilding the array. 

My next step is to update bios. 

Edited October 28, 2023 by dfox1787

[dfox1787]

On 10/26/2023 at 7:15 PM, JorgeB said:

Boot in safe mode to rule out plugin issues, Tailscale for example is known to cause this.

 

[EDACerton]

Update your Tailscale plugin. I released an update for the Tailscale plugin a couple days ago that fixes an issue that resulted in the WebGUI hanging on array startup for some users.

[dfox1787]

still having issues guys. please help

syslog (4)

[JorgeB]

Nov 20 02:47:48 MEDIA kernel: macvlan_broadcast+0x10a/0x150 [macvlan]
Nov 20 02:47:48 MEDIA kernel: ? _raw_spin_unlock+0x14/0x29
Nov 20 02:47:48 MEDIA kernel: macvlan_process_broadcast+0xbc/0x12f [macvlan]

 

Macvlan call traces will usually end up crashing the server, switching to ipvlan should fix it (Settings -> Docker Settings -> Docker custom network type -> ipvlan (advanced view must be enabled, top right)), then reboot.