Issue updating 6.12.6 from 11.5 and hangs at Triggering udev events

[gecl]

I've tried to update to 6.12.6 from 6.11.5 a few times and it always and hangs at
Triggering udev events:  /sbin/udevadm trigger --action=change

for about 20 minutes before i turned it off and rolled it to the backup i made right before the update.  Unraid starts no problem. Tried to redo the update and same result, it gets stuck at   Triggering udev events     I tried booting the usb in different ports but it never went anywhere.

Any suggestions?

Edited January 9 by gecl

[JorgeB]

1 minute ago, gecl said:

Any suggestions?

Possibly the Realtek issue as mentioned in the release notes, please post the diagnostics from v6.11.5.

[gecl]

Having the same issue updated to 6.12.6 from 6.11.5 and hangs at
Triggering udev events:  /sbin/udevadm trigger --action=change

for about 20 minutes before i turned it off and rolled it to the backup i made right before the update.  Unraid starts no problem. Tried to redo the update and same result, it gets stuck at   Triggering udev events     I tried booting the usb in different ports but it never wnt anywhere.

Any suggestions?

[trurl]

1 minute ago, JorgeB said:

Possibly the Realtek issue as mentioned in the release notes, please post the diagnostics from v6.11.5.

@gecl I will probably split yours into its own thread after we get the diagnostics and let the OP have his thread.

[trurl]

Since you had already started another thread I split it here.

[gecl]

Here are the diagnostics for 11.5

server-diagnostics-20240109-1406.zip

[gecl]

its an realtek r8125 card, im doing the driver

[trurl]

04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller [10ec:8125] (rev 05)
	Subsystem: Gigabyte Technology Co., Ltd RTL8125 2.5GbE Controller [1458:e000]
	Kernel driver in use: r8169
	Kernel modules: r8169

 

20 minutes ago, JorgeB said:

Possibly the Realtek issue as mentioned in the release notes

https://docs.unraid.net/unraid-os/release-notes/6.12.6/

[JorgeB]

Problem is that NIC with MTU[0]="9000", you can remove jumbo frames or use the Realtek driver plugin, or wait for v6.12.7

 

 

[gecl]

changed MTU back to 1500 and installed RTL8125 driver finally able to complete 12.6 update.