krackato Posted July 30, 2012 Share Posted July 30, 2012 I'm trying to install an AOC-SASMV8 card into my SuperMicro MBD-X8SIL-F-O motherboard The card fits into the motherboard. However, I'm not sure it's supposed to go into the slot that I'm installing it into. Can you guys check the photos below and let me know. Thanks. http://i.imgur.com/r0rQ9.jpg http://i.imgur.com/byJaX.jpg Link to comment
PeterB Posted July 30, 2012 Share Posted July 30, 2012 You are referring to the unused parts of the motherboard connector? That may be correct - it could be a PCIe x4 board going into a x8 slot? It would help if you tell us the exact model of motherboard and card. Link to comment
krackato Posted July 30, 2012 Author Share Posted July 30, 2012 The motherboard is a SuperMicro MBD-X8SIL-F-O. The card is a SUPERMICRO AOC-SASLP-MV8. Link to comment
PeterB Posted July 30, 2012 Share Posted July 30, 2012 Yes, that's correct. The black sockets are PCIe connectors, all three are x8 size, although, electrically, only two are x8 and one is x4. But your installation is absolutely correct. Link to comment
krackato Posted July 30, 2012 Author Share Posted July 30, 2012 So I can put the 4x cards into the 8x slots? Sorry if this is a bit newbie-ish, I haven't made a PC in a couple of years. Link to comment
marcusone Posted July 31, 2012 Share Posted July 31, 2012 Yes you can or visa versa. Mist 8x cards can run in a 4x slot (just not as well) why they are the same physical size. Sent from my SGH-I727R using Tapatalk 2 Link to comment
denzo Posted March 20, 2013 Share Posted March 20, 2013 Thanks OP I was wondering the same exact thing Link to comment
burtjr Posted March 20, 2013 Share Posted March 20, 2013 Yes, that's correct. The black sockets are PCIe connectors, all three are x8 size, although, electrically, only two are x8 and one is x4. But your installation is absolutely correct. I will add my +1 to this is correct. I just wanted you to have more than one comment stating you are correct. This is the board and SATA card I am using. Link to comment
Automatic Posted March 20, 2013 Share Posted March 20, 2013 Yes, that's correct. The black sockets are PCIe connectors, all three are x8 size, although, electrically, only two are x8 and one is x4. But your installation is absolutely correct. I will add my +1 to this is correct. I just wanted you to have more than one comment stating you are correct. This is the board and SATA card I am using. Pretty sure OP didn't wait a year before trying out for another confirmation On the side note, completely unrelated to unraid, does anyone know the performance degrade of graphics cards on x8 instead of x16 PCI 2.0 slots? Link to comment
burtjr Posted March 21, 2013 Share Posted March 21, 2013 Good catch did not see original post date, read the date of the last post. Too funny Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.