Apocrathia Posted November 13, 2013 Share Posted November 13, 2013 Here's what I have so far In my /boot/packages, I have the following 3 files: root@Storage:/boot/packages# ls net-snmp* -l -rwxrwxrwx 1 root root 1888292 2010-01-18 15:47 net-snmp-5.5-i486-2.txz* -rwxrwxrwx 1 root root 243 2013-11-13 13:11 net-snmp.conf* -rwxrwxrwx 1 root root 212 2013-11-13 12:35 net-snmp.install* My install script looks like this installpkg /boot/packages/libnl-1.1-i486-1.txz installpkg /boot/packages/net-snmp-5.5-i486-2.txz rm -rf /etc/snmp/snmpd.conf ln -s /boot/packages/net-snmp.conf /etc/snmp/snmpd.conf killall snmpd; /usr/sbin/snmpd My config file looks like this (the disks are commented out for now) # Basic info syslocation somewhere syscontact someone rocommunity public # System info #disk /mnt/disk1 #disk /mnt/disk2 #disk /mnt/disk3 #disk /mnt/disk4 #disk /mnt/disk5 #disk /mnt/disk6 #disk /mnt/disk7 #disk /mnt/cache And this line is in my /boot/config/go script # Install SNMPd /boot/packages/net-snmp.install So, I get everything up and going, I try to run a simple snmpwalk, and I get this: root@Storage:/boot/packages# snmpwalk -v 1 -c public localhost Timeout: No Response from localhost but, the daemon is running? root@Storage:~# ps aux | grep snmpd root 14689 0.0 0.1 10708 3808 ? S 13:27 0:00 snmpd And it's listening... root@Storage:~# netstat -anp | grep 161 udp 0 0 0.0.0.0:161 0.0.0.0:* 14689/snmpd Okay, let's log the output to the screen and see what I get root@Storage:/etc# snmpd -Le could not open /proc/net/if_inet6 cannot open /proc/net/snmp6 ... Warning: no access control information configured. It's unlikely this agent can serve any useful purpose in this state. Run "snmpconf -g basic_setup" to help you configure the snmpd.conf file for this agent. NET-SNMP version 5.5 Connection from UDP: [127.0.0.1]:34509->[127.0.0.1] Connection from UDP: [127.0.0.1]:34509->[127.0.0.1] Connection from UDP: [127.0.0.1]:34509->[127.0.0.1] Connection from UDP: [127.0.0.1]:34509->[127.0.0.1] Connection from UDP: [127.0.0.1]:34509->[127.0.0.1] Connection from UDP: [127.0.0.1]:34509->[127.0.0.1] Uh... What? So, it's connecting to the daemon, the passed community name and version should be right? What's going on? I'm hitting a brick wall here... Help, please. Quote Link to comment
snowboardjoe Posted November 15, 2013 Share Posted November 15, 2013 Looking at your output from running snmpd by hand, it looks like it's having issues parsing your config. Be default is it looking in the right location? Try explicitly telling it where you snmpd.conf is? Taking stabs in the dark here. It looks like you're doing all the right things so far. Quote Link to comment
Apocrathia Posted November 16, 2013 Author Share Posted November 16, 2013 Pointed the daemon to the absolute path of the config root@Storage:/etc/snmp# snmpd -c /etc/snmp/snmpd.conf -Le could not open /proc/net/if_inet6 cannot open /proc/net/snmp6 ... root@Storage:/etc/snmp# NET-SNMP version 5.5 Couple of ipv6 errors, but I'm not worried about that. Let's try it again root@Storage:/etc/snmp# snmpwalk -v 1 -c public localhost SNMPv2-MIB::sysDescr.0 = STRING: Linux Storage 3.9.6p-unRAID #23 SMP Wed Jun 26 19:25:49 PDT 2013 i686 SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::org DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (1504) 0:00:15.04 And then there's about 500 more lines of information after that And on the server side Connection from UDP: [127.0.0.1]:48658->[127.0.0.1] Connection from UDP: [127.0.0.1]:48658->[127.0.0.1] Connection from UDP: [127.0.0.1]:48658->[127.0.0.1] Connection from UDP: [127.0.0.1]:48658->[127.0.0.1] And about 500 more lines of that. All it took was a 2nd set of eyes. Thanks mate! So, I did this because I couldn't find a simple, just snmp package. How can I go about wrapping this up for other users in case they want to run snmp? I'm sure there's people out there running cacti or mrtg (or whatever, zenoss, zabbix, etc...) at home Quote Link to comment
BrianAz Posted November 19, 2013 Share Posted November 19, 2013 You will probably want to turn it into a Plugin. I know I would have used it rather than installing the unMenu MRTG package which comes with snmp. Here's a start... http://lime-technology.com/forum/index.php?topic=28433.msg252997#msg252997 Have you had any luck getting /mnt/user via SNMP? I noticed I DO get /mnt/user0 though it's not in snmpd.conf which is odd. But its not accurate. My df -h, snmpwalk and snmpd.conf: root@Tower:~# df -h Filesystem Size Used Avail Use% Mounted on tmpfs 128M 11M 118M 9% /var/log /dev/sda 3.8G 475M 3.3G 13% /boot /dev/md1 1.9T 1.8T 60G 97% /mnt/disk1 /dev/md2 1.9T 1.8T 51G 98% /mnt/disk2 /dev/md3 1.9T 1.8T 43G 98% /mnt/disk3 /dev/md4 1.9T 1.8T 83G 96% /mnt/disk4 /dev/md5 1.9T 1.8T 76G 96% /mnt/disk5 /dev/md6 1.9T 1.8T 59G 97% /mnt/disk6 /dev/md7 1.9T 1.8T 57G 97% /mnt/disk7 /dev/md8 1.9T 1.8T 47G 98% /mnt/disk8 /dev/md9 1.9T 1.8T 110G 95% /mnt/disk9 /dev/md10 932G 618G 315G 67% /mnt/disk10 /dev/md11 1.9T 582G 1.3T 32% /mnt/disk11 /dev/sdl1 466G 9.3G 457G 2% /mnt/cache shfs 20T 17T 2.2T 89% /mnt/user0 shfs 20T 17T 2.6T 87% /mnt/user root@Tower:/mnt# snmpwalk -v 2c -c cacti localhost hrFSMountPoint HOST-RESOURCES-MIB::hrFSMountPoint.1 = STRING: "/boot" HOST-RESOURCES-MIB::hrFSMountPoint.2 = STRING: "/mnt/disk1" HOST-RESOURCES-MIB::hrFSMountPoint.3 = STRING: "/mnt/disk2" HOST-RESOURCES-MIB::hrFSMountPoint.4 = STRING: "/mnt/disk3" HOST-RESOURCES-MIB::hrFSMountPoint.5 = STRING: "/mnt/disk4" HOST-RESOURCES-MIB::hrFSMountPoint.6 = STRING: "/mnt/disk5" HOST-RESOURCES-MIB::hrFSMountPoint.7 = STRING: "/mnt/disk6" HOST-RESOURCES-MIB::hrFSMountPoint.8 = STRING: "/mnt/disk7" HOST-RESOURCES-MIB::hrFSMountPoint.9 = STRING: "/mnt/disk8" HOST-RESOURCES-MIB::hrFSMountPoint.10 = STRING: "/mnt/disk9" HOST-RESOURCES-MIB::hrFSMountPoint.11 = STRING: "/mnt/disk10" HOST-RESOURCES-MIB::hrFSMountPoint.12 = STRING: "/mnt/disk11" HOST-RESOURCES-MIB::hrFSMountPoint.13 = STRING: "/mnt/cache" HOST-RESOURCES-MIB::hrFSMountPoint.14 = STRING: "/mnt/user0" root@Tower:/mnt# cat /boot/config/snmpd.conf rocommunity cacti syslocation Here syscontact [email protected] disk /mnt/disk1 disk /mnt/disk2 disk /mnt/disk3 disk /mnt/disk4 disk /mnt/disk5 disk /mnt/disk6 disk /mnt/disk7 disk /mnt/disk8 disk /mnt/disk9 disk /mnt/disk10 disk /mnt/disk11 disk /mnt/disk12 disk /mnt/disk13 disk /mnt/disk14 disk /mnt/disk15 disk /mnt/disk16 disk /mnt/disk17 disk /mnt/disk18 disk /mnt/disk19 disk /mnt/disk20 disk /mnt/cache root@Tower:/mnt# Quote Link to comment
Apocrathia Posted November 19, 2013 Author Share Posted November 19, 2013 snmpwalk -v 1 -c public localhost hrFSMountPoint HOST-RESOURCES-MIB::hrFSMountPoint.1 = STRING: "/boot" HOST-RESOURCES-MIB::hrFSMountPoint.2 = STRING: "/mnt/disk1" HOST-RESOURCES-MIB::hrFSMountPoint.3 = STRING: "/mnt/user" That's all I'm getting so far... Thanks for sending me that link, I'll get started on hacking together a plugin. And thanks for pointing this out, I want to figure out a way to get individual shares reporting in their values as well as the entire array. Quote Link to comment
JohnO Posted March 9, 2014 Share Posted March 9, 2014 ... I'll get started on hacking together a plugin. And thanks for pointing this out, I want to figure out a way to get individual shares reporting in their values as well as the entire array. If you are still plugging away at a plug-in, I'd be interested in giving a a test run (otherwise, I'll just mimic what you've done above). Thanks, John Quote Link to comment
Apocrathia Posted March 9, 2014 Author Share Posted March 9, 2014 So, I sort of got it working, but really it's just a package. It's feeding data into Cacti, and that's all I really care about. My go script has this extra line # Install SNMPd /boot/packages/net-snmp.install The net-snmp.install file looks like this # Install dependencies installpkg /boot/packages/libnl-1.1-i486-1.txz # Install net-snmp installpkg /boot/packages/net-snmp-5.5-i486-2.txz # Clear out any old configs rm -rf /etc/snmp/snmpd.conf # Throw in the new config ln -s /boot/custom/etc/snmp/snmpd.conf /etc/snmp/snmpd.conf # kill any running snmp daemons killall snmpd # start the daemon with the new config /usr/sbin/snmpd -c /etc/snmp/snmpd.conf And that config file looks like this # Basic info syslocation Somewhere syscontact Someone rocommunity public # System info #disk /mnt/disk1 #disk /mnt/disk2 #disk /mnt/disk3 #disk /mnt/disk4 #disk /mnt/disk5 #disk /mnt/disk6 #disk /mnt/disk7 #disk /mnt/cache I know it's not much, but once it was working, I just quit worrying with it. Quote Link to comment
JohnO Posted March 9, 2014 Share Posted March 9, 2014 Thanks for the rundown. I'm getting close. It looks like Perl (or a portion thereof) is required. Here's the message I received: /usr/sbin/snmpd: error while loading shared libraries: libperl.so: cannot open shared object file: No such file or directory Should I grab the whole Perl slackware package, or is there a simpler way to just get the required shared library? I don't intend to run many plug-ins as I'm running unRAID as a VM as it is, and the other VMs will shoulder the heavy lifting. I may end up with some other things that help with unRAID, and if many of those require Perl, maybe I should just bite the bullet. Thanks, John Quote Link to comment
Apocrathia Posted March 9, 2014 Author Share Posted March 9, 2014 Yeah, just grab perl. It won't hurt anything. No idea what needs it. I probably have something else using it as well, so it wasn't a direct dependency. Quote Link to comment
JohnO Posted March 9, 2014 Share Posted March 9, 2014 Yeah, just grab perl. It won't hurt anything. No idea what needs it. I probably have something else using it as well, so it wasn't a direct dependency. User error on my part. When I went out to the Slackware site I mistakenly grabbed packages for the "current" release. When I re-checked my work and went back to grab packages for the 13.1 release, there was no longer a dependency on Perl. It's working fine now. I've got my Zenoss monitoring system checking unRAID via SNMP. Thanks! John Quote Link to comment
NAS Posted March 10, 2014 Share Posted March 10, 2014 FYI new unRAID now contains Perl Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.