beire Posted June 11, 2015 Share Posted June 11, 2015 Yeah, my own server has been getting slower parity checks since updating to V6. I started a thread, but the ESXI subforums is dead and quite unsupported these days it seems. The other server's parity checks are flying in comparison. The only difference is drives. Seagate 3tb vs WD 3tb Red's on my server. Both on m1015 HBA. Mine does +- 95mb/s , the other 155mb/s ! Link to comment
JimPhreak Posted June 11, 2015 Share Posted June 11, 2015 Yeah, my own server has been getting slower parity checks since updating to V6. I started a thread, but the ESXI subforums is dead and quite unsupported these days it seems. The other server's parity checks are flying in comparison. The only difference is drives. Seagate 3tb vs WD 3tb Red's on my server. Both on m1015 HBA. Mine does +- 95mb/s , the other 155mb/s ! Yea something isn't right there either. But if parity checks are the issue it sounds like it's something to do with your data disks themselves not the USB flash drive. Link to comment
CHBMB Posted June 11, 2015 Share Posted June 11, 2015 Yeah, my own server has been getting slower parity checks since updating to V6. I started a thread, but the ESXI subforums is dead and quite unsupported these days it seems. The other server's parity checks are flying in comparison. The only difference is drives. Seagate 3tb vs WD 3tb Red's on my server. Both on m1015 HBA. Mine does +- 95mb/s , the other 155mb/s ! Are both the m1015's on the same firmware version? One other thing to consider Link to comment
beire Posted June 11, 2015 Share Posted June 11, 2015 Yeah, my own server has been getting slower parity checks since updating to V6. I started a thread, but the ESXI subforums is dead and quite unsupported these days it seems. The other server's parity checks are flying in comparison. The only difference is drives. Seagate 3tb vs WD 3tb Red's on my server. Both on m1015 HBA. Mine does +- 95mb/s , the other 155mb/s ! Are both the m1015's on the same firmware version? One other thing to consider I should check. But i believe they are running the same firmware. Link to comment
CHBMB Posted June 11, 2015 Share Posted June 11, 2015 Yeah, my own server has been getting slower parity checks since updating to V6. I started a thread, but the ESXI subforums is dead and quite unsupported these days it seems. The other server's parity checks are flying in comparison. The only difference is drives. Seagate 3tb vs WD 3tb Red's on my server. Both on m1015 HBA. Mine does +- 95mb/s , the other 155mb/s ! Are both the m1015's on the same firmware version? One other thing to consider I should check. But i believe they are running the same firmware. Would be interesting to swap all the drives around and the flash of course. But somewhat impractical unless you have hot swap bays.. Link to comment
beire Posted June 11, 2015 Share Posted June 11, 2015 Yeah, my own server has been getting slower parity checks since updating to V6. I started a thread, but the ESXI subforums is dead and quite unsupported these days it seems. The other server's parity checks are flying in comparison. The only difference is drives. Seagate 3tb vs WD 3tb Red's on my server. Both on m1015 HBA. Mine does +- 95mb/s , the other 155mb/s ! Are both the m1015's on the same firmware version? One other thing to consider I should check. But i believe they are running the same firmware. Would be interesting to swap all the drives around and the flash of course. But somewhat impractical unless you have hot swap bays.. Yeah. That would be a real pain in the ass. Mine had hot swap bays but the other doesn't. It's just strange that parity checks are slower the moment i updated. I did a parity check before and after the update. It would seem unlikely if it was a hardware issue. Firmware version is only visible when rebooting? Or is it visible in unraid syslog? Link to comment
jonp Posted June 12, 2015 Share Posted June 12, 2015 Hey guys, I'm going to close this thread as beta15 is definitely no longer relevant. If any active discussions were occurring for support or otherwise, please take them to the appropriate sub-forum. Thanks!! Link to comment
Recommended Posts