pyrater Posted June 21, 2015 Share Posted June 21, 2015 I have 2 SSD's for VM's. These SSDs can run up to 70C and normally are around 45-55C. Is there a way to modify the webgui to not alert me of HOT temps and allow me to set the alerts up myself for each drive. IE SSD Alert at 60-65C Normal HD Alert at 40-45C Quote Link to comment
itimpi Posted June 21, 2015 Share Posted June 21, 2015 I have 2 SSD's for VM's. These SSDs can run up to 70C and normally are around 45-55C. Is there a way to modify the webgui to not alert me of HOT temps and allow me to set the alerts up myself for each drive. IE SSD Alert at 60-65C Normal HD Alert at 40-45C At the moment the warning trigger temperatures are global settings under Settings->Display Settings so cannot be set for individual devices. Not a bad idea for a future enhancement. I have found that different drive brands tend to often have significantly different temperatures in normal running. It would be nice to tune even the individual hard disks let alone your special case of a SSD that runs hot. That would probably mean you would need to have a global setting as the default with the ability to override this in the settings for individual disks. Quote Link to comment
Zonediver Posted June 21, 2015 Share Posted June 21, 2015 Thats a "very important" function, because SSDs have a completely different Operating Temp. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.