pfp Posted August 2, 2017 Share Posted August 2, 2017 (edited) Ran into a problem during the monthly parity check. Close to the end of my parity check something happened on disk 11 and it now shows disabled with a red x. There are also a number of errors. I've attached a screen shot as well as the full syslog. I have not done anything on the server since finding this. I could use some advice on the best course of action. syslog.txt Edited August 3, 2017 by pfp Quote Link to comment
JorgeB Posted August 2, 2017 Share Posted August 2, 2017 Post your diagnostics: tools -> diagnostics Quote Link to comment
pfp Posted August 2, 2017 Author Share Posted August 2, 2017 yass-diagnostics-20170802-0643.zip Quote Link to comment
JorgeB Posted August 2, 2017 Share Posted August 2, 2017 Disk dropped offline so there's no SMART, power down, check cables, reboot and post new diags. Quote Link to comment
pfp Posted August 2, 2017 Author Share Posted August 2, 2017 Thank you, Will try this tonight and post the new diag. Quote Link to comment
pfp Posted August 3, 2017 Author Share Posted August 3, 2017 New diagnostics attached. yass-diagnostics-20170802-1821.zip Quote Link to comment
trurl Posted August 3, 2017 Share Posted August 3, 2017 Disk 11 has 8 pending. You need to replace it. Do you have Notifications setup? It should notifiy about the bad disk. Don't have time to look at your other disks right now. If you click on each one you can get to their attributes and if any are bad it should show you by highlighting the attribute. If they are all good you can replace and rebuild disk11. Quote Link to comment
pfp Posted August 3, 2017 Author Share Posted August 3, 2017 Well the good news is that i was already preclearing two drives to expand the array. Bad news is that the expansion just got cut in half. None of the other drives were highlighing errors so i removed the drive and am rebuilding with a new drive. Thank you Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.