January 20, 20188 yr Thanks @ljm42, that fixed it!!! - i restored /boot to its previous state, and restarted to confirm the original issue was present at startup (it was). - i updated /boot/config/domain.cfg per comment from @ljm42 and restarted. I didn't have any isos in /mnt/user/isos, so i left the VIRTIOISO blank.
January 20, 20188 yr This sounds like a bug that @limetech needs to squash in the next release. Probably should start the array normally, and alert the user with a notification that VM's are enabled but a path is missing so they won't start until corrected in settings, VM Manager.
January 21, 20188 yr On 1/19/2018 at 6:35 PM, zleef said: Thanks @ljm42, that fixed it!!! - i restored /boot to its previous state, and restarted to confirm the original issue was present at startup (it was). - i updated /boot/config/domain.cfg per comment from @ljm42 and restarted. I didn't have any isos in /mnt/user/isos, so i left the VIRTIOISO blank. I followed the same steps and was saved from disaster.
January 21, 20188 yr On 1/19/2018 at 8:05 PM, ljm42 said: Following a hint from @bakes82, I think I see the problem. Your /boot/config/domain.cfg file looks like this: SERVICE="enable" IMAGE_FILE="/mnt/user/system/libvirt/libvirt.img" IMAGE_SIZE="1" DEBUG="no" DOMAINDIR="/mnt/user/domains/" MEDIADIR="" VIRTIOISO="" BRNAME="virbr0" VMSTORAGEMODE="auto" Note that the MEDIADIR setting is empty. I just verified on my system that that is required for the array to start. Here is the default: MEDIADIR="/mnt/user/isos/" I'm not sure if VIRTIOISO is required, but here is what I have: VIRTIOISO="/mnt/user/isos/virtio-win-0.1.118-2.iso" Fingers crossed this does it! This solved the issue for me as well. Out of curiosity I checked /boot/config/domain.cfg on 6.3.5 before I attempted another upgrade and the MEDIADIR was empty with no problems. Anyways thanks for solving this!
January 23, 20188 yr On 20/01/2018 at 2:05 AM, ljm42 said: Following a hint from @bakes82, I think I see the problem. Your /boot/config/domain.cfg file looks like this: SERVICE="enable" IMAGE_FILE="/mnt/user/system/libvirt/libvirt.img" IMAGE_SIZE="1" DEBUG="no" DOMAINDIR="/mnt/user/domains/" MEDIADIR="" VIRTIOISO="" BRNAME="virbr0" VMSTORAGEMODE="auto" Note that the MEDIADIR setting is empty. I just verified on my system that that is required for the array to start. Here is the default: MEDIADIR="/mnt/user/isos/" I'm not sure if VIRTIOISO is required, but here is what I have: VIRTIOISO="/mnt/user/isos/virtio-win-0.1.118-2.iso" Fingers crossed this does it! yes, happened to be the fix for me as well
January 26, 20188 yr On 1/19/2018 at 6:05 PM, ljm42 said: Following a hint from @bakes82, I think I see the problem. Your /boot/config/domain.cfg file looks like this: SERVICE="enable" IMAGE_FILE="/mnt/user/system/libvirt/libvirt.img" IMAGE_SIZE="1" DEBUG="no" DOMAINDIR="/mnt/user/domains/" MEDIADIR="" VIRTIOISO="" BRNAME="virbr0" VMSTORAGEMODE="auto" Note that the MEDIADIR setting is empty. I just verified on my system that that is required for the array to start. Here is the default: MEDIADIR="/mnt/user/isos/" I'm not sure if VIRTIOISO is required, but here is what I have: VIRTIOISO="/mnt/user/isos/virtio-win-0.1.118-2.iso" Fingers crossed this does it! This solved the problem I had where UNRAID was stuck on "Starting Services"
March 13, 20188 yr Replace entire domain.cfg with default. and it looks like its up and running again ! Thanks !
August 16, 20223 yr Hi guys. My ver. 6.10.3 got stucked in "Array Started - Starting services..." When I look at log I can see some errors: Aug 16 17:56:29 Tower kernel: XFS (md3): metadata I/O error in "xfs_btree_read_buf_block.constprop.0+0x7a/0xc6 [xfs]" at daddr 0x17ffffff8 len 8 error 74 Aug 16 17:56:29 Tower kernel: XFS (md3): Metadata CRC error detected at xfs_allocbt_read_verify+0x12/0x56 [xfs], xfs_cntbt block 0x1fffffff0 Aug 16 17:56:29 Tower kernel: XFS (md3): Unmount and run xfs_repair Aug 16 17:56:29 Tower kernel: XFS (md3): First 128 bytes of corrupted metadata buffer: Aug 16 17:56:29 Tower kernel: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Aug 16 17:56:29 Tower kernel: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Aug 16 17:56:29 Tower kernel: 00000020: 8b e3 8a 45 5d 02 01 90 07 0b 2e 21 59 9e f2 06 ...E]......!Y... Aug 16 17:56:29 Tower kernel: 00000030: 00 00 00 00 67 65 c9 b5 00 00 00 00 00 00 00 00 ....ge.......... Aug 16 17:56:29 Tower kernel: 00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Aug 16 17:56:29 Tower kernel: 00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Aug 16 17:56:29 Tower kernel: 00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Aug 16 17:56:29 Tower kernel: 00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Is this related to Disk3 from array? edit: I found "Starting services..." appears when I try to add SHARE (with no success). Edited August 16, 20223 yr by fct
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.