H2O_King89 Posted November 28, 2018 Share Posted November 28, 2018 It didn't with mine with 1 LSI 9211-8i, 1 SuperMicro SAS2LP, and 1 IBM M1015, connected to a Norco 4224. Not sure which of the HBA's I initially tried without taping, but it was with at least two drives that I experienced no power-up unless the pins were taped, after which I started taping them all immediately after shucking. FWIW, the Norco in this setup is the "newer" version that supports only a single PSU and thus has a differently designed "backplane". I've retired this case and relocating the X9 hardware to my older, dual-PSU capable 4224 for my backup server. And next PWDIS drive I get I'll test it without tape in both my new Chenbro as well as the Norco system (all three HBA's)... FYI, rebuilding an 8TB drive on the X9/Norco setup netted an average of 110MB/s. Rebuilding a 6TB of the same array on the new X11/Chenbro averaged 198MB/s, and replacing an 8TB with a 10TB averaged 117MB/s; the CPU utilization maybe pegged 50% now and then, but it was typically idling around 5%, unlike the X9/Pentinum which maxxed out quite often during rebuilds. Certainly a big step up, especially for my VMs. Now I have to build a noise reduction cabinet to quiet down this maddingly howling rig, and upgrade my home network to 10Gb... I think I got my case 2 years ago. Don’t know the build date. Each plane has its own molex connector. Sent from my iPhone using Tapatalk Pro Quote Link to comment
Auggie Posted November 29, 2018 Share Posted November 29, 2018 23 hours ago, H2O_King89 said: I think I got my case 2 years ago. Don’t know the build date. Each plane has its own molex connector. Is there one molex connector per backplane, or two? The version with one is the newer with which the system I have had to have the pins taped. If you have the single, what HBA's are you using? Quote Link to comment
H2O_King89 Posted November 29, 2018 Share Posted November 29, 2018 It’s one molex per backplane. I’m using a lsi 9300-8iI’m going to be switch to the 9305-24i soon Sent from my iPhone using Tapatalk Pro Quote Link to comment
Auggie Posted November 29, 2018 Share Posted November 29, 2018 9 hours ago, H2O_King89 said: It’s one molex per backplane. I’m using a lsi 9300-8i I’m going to be switch to the 9305-24i soon Interesting. I will test on my 9211-8i to see if the LSI's are more immune to the PWDIS feature... Quote Link to comment
Harro Posted December 31, 2018 Share Posted December 31, 2018 Back on sale for 179.99 again. 1 Quote Link to comment
Endy Posted May 12, 2019 Share Posted May 12, 2019 Looks like they are on sale for $179 again. Quote Link to comment
Endy Posted May 14, 2019 Share Posted May 14, 2019 Now they are down to $159 for the 10TB and $129 for the 8TB. Quote Link to comment
cybrnook Posted May 14, 2019 Share Posted May 14, 2019 That's nuts........ in for 10 x 10's Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.