Shinobi Posted February 3, 2019 Share Posted February 3, 2019 I was wondering if Unraid, has some kind of support for Quadro NVS GPUs The one in question is this: NVS 315 https://www.pny.com/NVIDIA_NVS_315_for_Dual_DVI_and_VGA_Low_Profile It has been a while since I tested with this card, but back then, a year before, I remember trying to boot with this card in GUI mode & saw some possibly resolution related issues. I replaced it with a Radeon R9 290X, and all was ok out of the box, but then now, I want to go with the less power hungry NVS card again. Wondering if anybody had any similar observations.🙂 Quote Link to comment
Squid Posted February 8, 2019 Share Posted February 8, 2019 I always think of unRaid's built-in local GUI as an emergency access to the UI, and hence have never particularly cared about it's resolution / what not when it's on it. The primary method of accessing the GUI is through a browser running on another system or via a VM Quote Link to comment
Shinobi Posted February 10, 2019 Author Share Posted February 10, 2019 On 2/9/2019 at 5:14 AM, Squid said: I always think of unRaid's built-in local GUI as an emergency access to the UI, and hence have never particularly cared about it's resolution / what not when it's on it. The primary method of accessing the GUI is through a browser running on another system or via a VM My situation is such that I would like to have access to the console, irrespective of the status of the network, & my mobo/cpu does not have integrated graphics. Add to the fact that I would like to save power, with whatever hardware I have. Is there some way to know the list of GPUs, supported by Unraid's kernel & default drivers ? I mean, that it at least provides some kind of 2D acceleration for window managers ? Quote Link to comment
John_M Posted February 10, 2019 Share Posted February 10, 2019 I can't give you an exact answer but the GUI works fine on all the integrated GPUs (AMD and Intel) and low end graphics cards I've ever tried. One server currently has this in a PCI slot (to avoid wasting a precious PCIe slot): [10de:0185] 03:05.0 VGA compatible controller: NVIDIA Corporation NV18 [GeForce4 MX 4000] (rev c1) and I've used PCIe Radeon HD 5450 and GeForce GT 210 cards successfully. They are inexpensive, small, passively cooled and don't use much power. Quote Link to comment
rlacroix464 Posted May 10, 2021 Share Posted May 10, 2021 i have a NVS 310 in a t410 server, i keep getting this error, i cant figure it out, any ideas? internal error: process exited while connecting to monitor: 2021-05-10T18:53:53.999194Z qemu-system-x86_64: -device vfio-pci,host=0000:06:00.0,id=hostdev0,bus=pci.3,addr=0x0: vfio 0000:06:00.0: failed to setup container for group 16: Failed to set iommu for container: Operation not permitted Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.