joachimvadseth Posted June 24, 2019 Share Posted June 24, 2019 Updated a couple of weeks ago and Ive discovered that videos in my Plex library (not all of the videos, but many of them) are stuttering or tearing and jumps many many minutes ahead sometimes. After Ive noticed this I also double chedked the actual video files on my SMB share, and they do suffer the same way. Anyeone have any ideas? Run 5x4TB drives with one in parity. Last parity check was yesterday and passed. 16GBs of RAM and an old i5-2500k for power. Idle load is about 3-4% with a few dockers running. Thanks in advance. Link to comment
saarg Posted June 24, 2019 Share Posted June 24, 2019 If it happens in VLC or any other video player, it's an issue with your files or maybe one of your disk is bad. Link to comment
testdasi Posted June 24, 2019 Share Posted June 24, 2019 Attach diagnostics. I agree with saarg, sounds to me like one of your disks is on its last leg. Link to comment
joachimvadseth Posted June 24, 2019 Author Share Posted June 24, 2019 Yea that’s my opinion too. Its WD RED NAS Edition drives, not that old either. 3 yeats maybe? How do I run a diag? Link to comment
ProZac Posted June 24, 2019 Share Posted June 24, 2019 1 hour ago, joachimvadseth said: Yea that’s my opinion too. Its WD RED NAS Edition drives, not that old either. 3 yeats maybe? How do I run a diag? Stated on top here Link to comment
joachimvadseth Posted June 29, 2019 Author Share Posted June 29, 2019 Like this? WDC_WD40EFRX-68WT0N0_WD-WCC4E2CNJASS-20190629-1804 disk4 (sdf).txt WDC_WD40EFRX-68WT0N0_WD-WCC4E2FAE7XR-20190629-1804 disk3 (sde).txt WDC_WD40EFRX-68WT0N0_WD-WCC4E2YJS8P6-20190629-1804 parity (sdb).txt WDC_WD40EFRX-68WT0N0_WD-WCC4E6NFTC1P-20190629-1804 disk1 (sdc).txt WDC_WD40EFRX-68WT0N0_WD-WCC4E6NLN531-20190629-1804 disk2 (sdd).txt Link to comment
opentoe Posted June 30, 2019 Share Posted June 30, 2019 6 hours ago, joachimvadseth said: Oh diag.zip 565.99 kB · 0 downloads Copy a large file from your array or a folder with lots of files (20 GB of data should be fine) and see what speeds you are getting. If you are receiving slow speeds during the copy or dips down to 0 like I do, maybe you have my plague. Worth a check and simple to test. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.