Harro Posted August 19, 2019 Share Posted August 19, 2019 (edited) Just as the title states I replaced the HP controller with the lsi 16i and most disks are now missing.I do have a snap shot of my assignments before the replace. All disks are shown in the unassigned devices. My parity disks are ok and mounted. Should I mount all the disks and then unassign my parity drives, start array , stop array and then mount my parity disks back in and let parity rebuild. Or is there a better way? Edited August 19, 2019 by Harro Solved Quote Link to comment
JorgeB Posted August 19, 2019 Share Posted August 19, 2019 You could do a new config and trust parity, but please post diags first since I would expect the LSI to detect the disk as they were. Quote Link to comment
Harro Posted August 19, 2019 Author Share Posted August 19, 2019 Thank you. I added a pic of when I choose from the drop down menu. Same disk but still states it as wrong. tower-diagnostics-20190819-1656.zip Quote Link to comment
JorgeB Posted August 19, 2019 Share Posted August 19, 2019 Try toggling Settings -> Display settings -> Display world-wide-name in device ID: You should also update the HBA firmware, it's very old. Quote Link to comment
itimpi Posted August 19, 2019 Share Posted August 19, 2019 It looks as though the different controllers are reporting the disk serial in slightly different formats which is why Unraid is not realising they are the same drive. Quote Link to comment
Harro Posted August 19, 2019 Author Share Posted August 19, 2019 14 minutes ago, johnnie.black said: Try toggling Settings -> Display settings -> Display world-wide-name in device ID: You should also update the HBA firmware, it's very old. Toggled settings with no affects. I would guess I should flash the 9300 with the 9305 firmware. Correct. I haven't found any updates to the 9300. Quote Link to comment
JorgeB Posted August 19, 2019 Share Posted August 19, 2019 https://docs.broadcom.com/docs/9300_16i_Package_P16_IT_FW_BIOS_for_MSDOS_Windows.zip 1 Quote Link to comment
Harro Posted August 19, 2019 Author Share Posted August 19, 2019 Thank you, Been searching and only came up with the 9305 Quote Link to comment
Harro Posted August 19, 2019 Author Share Posted August 19, 2019 Took a bit, had to take drives out and bring case out of attic, but got the controller firmware installed. Installed drives and Unraid saw them all. Thanks you all. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.