christopherhughes Posted October 26, 2019 Share Posted October 26, 2019 Hi, recently build my first Unraid server (previously used nap-it on Solaris 11.3 and Centos7). Asus x570 motherboard rhyzen 3900x CPU 32gb EEC Ram 2 x M2 drives for cache and dockers Sas9220-8i HBA nvidia quadro P2000 APC UPS system was running fine for 3 weeks, last night it mysteriously rebooted, and I’m not able to boot into headless Unraid. Attached is the footage of the boot up before screen goes blank and system reboots again. very grateful for and recommendations. Booting into safe mode with no plugins makes no difference and also no memory errors reported after running the mem test from the menu thanks in advance chris Quote Link to comment
christopherhughes Posted October 27, 2019 Author Share Posted October 27, 2019 Still having this problem. What I've tried so far. 1) Updated Asus x570 Bios to latest 2) Copied backed up Unraid install to new USB 3) Attempted to boot from clean new 6.7.2 install Quote Link to comment
Squid Posted October 27, 2019 Share Posted October 27, 2019 Enable the syslog server and set it to mirror the log to the flash drive (Tools - Syslog server). Wait until the next reboot and then post the syslog from the flash drive here. Also would be great if you could also upload your diagnostics Quote Link to comment
christopherhughes Posted October 27, 2019 Author Share Posted October 27, 2019 Hi Squid, thanks for your reply. I can’t even get the system to boot to be able to access the menu. Is there a way to enable syslog server without accessing the menu? perhaps a config hack?. Spent a fun day playing with Bios settings and different USB sticks / versions. Nothing is working, but I’ve just ran the memtest83 from a clean install of the latest 6.8 RC and it’s found errors. I’m running with ECC memory, (Crucial 2x16GB PC4-2666V-EE1 CT16G4WFD8266). I can’t find any ECC memory reported on ASUS’s QVL list, so I’ve ordered 2 sticks of Corsair non ECC memory arriving tomorrow from Amazon to try. I’ll report back! Quote Link to comment
Squid Posted October 27, 2019 Share Posted October 27, 2019 2 minutes ago, christopherhughes said: Spent a fun day playing with Bios settings and different USB sticks / versions. Nothing is working, but I’ve just ran the memtest83 from a clean install of the latest 6.8 RC and it’s found errors. Even though you've already ordered memory, would be good to try disabling XMP / any overclocking you've got. Quote Link to comment
christopherhughes Posted October 27, 2019 Author Share Posted October 27, 2019 I can confirm XMP is disabled and cpu is not overclocked. Quote Link to comment
christopherhughes Posted October 28, 2019 Author Share Posted October 28, 2019 Replacing the memory fixed the problem! Back up and running. 😁 Replaced my USB stick also as the Sandisk Cruzer plastic was slipping of the metal body after all the inserting and pulling out trying to test different config options. New; Corsair 163301 Vengeance LPX 32 GB (2 x 16 GB) DDR4 3200 Faulty; Crucial 2x16GB PC4-2666V-EE1 CT16G4WFD8266 Quote Link to comment
John_M Posted November 2, 2019 Share Posted November 2, 2019 Was there any reason for thinking that ECC RAM would work or did you just happen to have some and thought you'd give it a try? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.