mkleist Posted November 24, 2019 Share Posted November 24, 2019 I have two vm's installed on my server, one Windows 10 and one Mac. The Mac has a GPU passed through, the windows does not. Both using different CPU pins, both work fine by themselves. My problem is as soon as I try to start both of them, one of them turns off. Windows is up and running fine, I go to start the Mac one and the Windows VM turns off right away. Any ideas where to look? I googled around but couldn't find anything. Thanks! Quote Link to comment
Squid Posted November 24, 2019 Share Posted November 24, 2019 You should post your diagnostics. Does the VM turn off or does it pause? Quote Link to comment
mkleist Posted November 24, 2019 Author Share Posted November 24, 2019 I have attached the diagnostics. The Vm just turns off completely. tower-diagnostics-20191124-1650.zip Quote Link to comment
Squid Posted November 24, 2019 Share Posted November 24, 2019 Without digging in deep, what I think you're seeing is that on the VM tab as soon as both VMs are started, it shows as nothing is installed. Update to 6.8.0-rc7 to fix this. Quote Link to comment
mkleist Posted November 24, 2019 Author Share Posted November 24, 2019 (edited) So that did happen as well, but I was connected via VNC to the windows VM and when I started the Mac VM, the VNC window disconnected right away. I'll updated to rc7 once I finish an update in the VM. Edited November 24, 2019 by mkleist Quote Link to comment
mkleist Posted November 24, 2019 Author Share Posted November 24, 2019 I updated to RC7. I was able to get my mac vm to start up, but it acted like it wasn't connected to the internet. I go back to my main computer and my windows vm has shut down again. Quote Link to comment
Squid Posted November 24, 2019 Share Posted November 24, 2019 Post a new set of diagnostics now that the one problem is fixed, and the logs aren't being cluttered by the other error Quote Link to comment
mkleist Posted November 24, 2019 Author Share Posted November 24, 2019 Here you go. tower-diagnostics-20191124-1800.zip Quote Link to comment
bastl Posted November 24, 2019 Share Posted November 24, 2019 @mkleist You have 16GB in your server and both VMs are setup to use max 8GB. Use a fixed value for both and don't forget that unraid itself also needs some RAM + all your Dockers you use. Test it with fixed 4GB for both VMs. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.