birdsofprey02 Posted November 29, 2019 Share Posted November 29, 2019 (edited) Upgraded from 6.8.0-rc6 to 6.8.0-rc7 yesterday and after reboot, I'm seeing some strange things. All of my array disks are missing. unRAID understands what should be there (shows disk serial number and says missing). These disks are attached to SAS9211-8i The LSI card sees all the disks upon boot (so does the BIOS) My PCI NIC is not seen in unRAID Only the onboard NIC is being seen; BIOS sees all NICs appropriately My unRAID users are gone, but ROOT and the ROOT password work fine Unassigned devices are missing This includes a SSD cache drive and SSD vm/docker storage Also a USB attached unassigned disk is missing as well (but seen in BIOS during boot) I downgraded from rc7 back down to rc6, but still having the same issue after reboot. This is a relatively new system, its been running solid for about 2 months now. I'm still in the process of getting backups going, I'd rather not have to start over Though, with it not seeing disks right now, I don't think starting over would even help. I originally thought something wrong with my backplane, but then I don't understand the PCI NIC not being seen and the user(s) missing. Edited November 29, 2019 by birdsofprey02 Quote Link to comment
JorgeB Posted November 29, 2019 Share Posted November 29, 2019 7 minutes ago, birdsofprey02 said: I downgraded from rc7 back down to rc6, but still having the same issue after reboot. That means the upgrade wasn't the problem, possibly the flash drive, please post the diagnostics: Tools -> Diagnostics Quote Link to comment
birdsofprey02 Posted November 29, 2019 Author Share Posted November 29, 2019 I rebooted a few times and no dice. The final time, I shut down and unplugged... When you asked for the diagnostics, I fired it back up and all is well. Re-upgraded to RC7 again and rebooted and its still up and running fine. Seems like an odd course of events. This server (Lenovo TS410) has a 450watt power supply. I'm using 4 SAS disks on a PCI controller connected to a SAS backplane, 2 SSDs, 1 dvd-rom... You think I'm underpowered? Or USB key problem? I'll backup asap, but that just seemed odd to me. I am about to transfer everything to a new case that will have a 700watt PSU, but I didn't think that was my issue here. My UPS usb cable is plugged into unRAID and it has a mac and the unRAID and it says only 173watts being used generally. Quote Link to comment
trurl Posted November 29, 2019 Share Posted November 29, 2019 Are you booting from USB2 port? That is often more reliable. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.