Wzyss Posted December 9, 2019 Share Posted December 9, 2019 Currently running unRAID 6.7.2. I'm unable to access the web GUI from any device unless I manually edit the hosts file. The IP of server is 10.0.0.10 and ended up with the domain nasty.local. Devices cannot access the web GUI because upon loading 10.0.0.10, it gets rewritten to nasty.local. Any ideas on what could be causing this? Quote Link to comment
JonathanM Posted December 9, 2019 Share Posted December 9, 2019 try navigating to https://10.0.0.10 Quote Link to comment
trurl Posted December 9, 2019 Share Posted December 9, 2019 Are your sure that is the IP address of your server? Are you sure no other device on your network has that IP? Quote Link to comment
Wzyss Posted December 9, 2019 Author Share Posted December 9, 2019 Yes, this is the correct IP address. SMB shares work flawlessly using \\10.0.0.10\share.Unfortunately I can't get the GUI to load as it seems to rewrite to the local domain. I can access the GUI if I edit the hosts file of a machine and manually point nasty.local to the IP address of the server.HTTPS doesn't make a difference in this case, it continues to rewrite to the domain. Quote Link to comment
trurl Posted December 9, 2019 Share Posted December 9, 2019 Sounds like a networking issue rather than an Unraid issue, but go to Tools - Diagnostics and attach the complete diagnostics zip file to your NEXT post. Quote Link to comment
Wzyss Posted December 9, 2019 Author Share Posted December 9, 2019 2 hours ago, trurl said: Sounds like a networking issue rather than an Unraid issue, but go to Tools - Diagnostics and attach the complete diagnostics zip file to your NEXT post. Honestly I'm unsure what it could be. Attached you'll find the diagnostics zip that was requested. nasty-diagnostics-20191209-1726.zip Quote Link to comment
Wzyss Posted December 9, 2019 Author Share Posted December 9, 2019 5 hours ago, jonathanm said: try navigating to https://10.0.0.10 This didn't work initially, but I figured I should clear cache on my browser and I can confirm that this works. I was unaware that I had muted notifications for the invalid certificate that I completely forgot the GUI runs over HTTPS. Thanks for pointing me in the right direction, guys. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.