BrunoVic Posted February 4, 2020 Share Posted February 4, 2020 (edited) Good Afternoon, I am having issues installing a 10TB into my UNRAID running a core2quad on a ga-ep45-ud3r motherboard. I've been Googling all day and I cannot tell if my motherboard doesn't support 10TB or not. UNRAID simply doesn't see it at all. It acts like nothing is installed. Has anyone else had this issue? Edited February 5, 2020 by BrunoVic Quote Link to comment
JorgeB Posted February 4, 2020 Share Posted February 4, 2020 Does it show up in the BIOS? Some newer disks have a PWDIS feature that won't power up if 3.3v is supplied, google "wd 3.3v sata pin" 1 Quote Link to comment
superloopy1 Posted February 5, 2020 Share Posted February 5, 2020 If it's a WD white label then it's defo the 3.3v power problem. Needs a bit of thin tape to cover pin3 on power connector. I have three of these schucked drives running in my array currently. 1 Quote Link to comment
testdasi Posted February 5, 2020 Share Posted February 5, 2020 If you are not sure what to do, Byte My Bits youtube channel has a tutorial on how to cover the right 3.3v pin. 2 Quote Link to comment
BrunoVic Posted February 5, 2020 Author Share Posted February 5, 2020 16 hours ago, johnnie.black said: Does it show up in the BIOS? Some newer disks have a PWDIS feature that won't power up if 3.3v is supplied, google "wd 3.3v sata pin" This did the trick. Took me all day Google searching the symptoms and I didn't find anything. I ask you the question and you answered it in a matter of seconds. Quote Link to comment
BrunoVic Posted February 5, 2020 Author Share Posted February 5, 2020 3 hours ago, testdasi said: If you are not sure what to do, Byte My Bits youtube channel has a tutorial on how to cover the right 3.3v pin. Thank you yes I used his tutorials. I've been a fan of his for quite awhile. He has a lot of helpful tips. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.