Enkill Posted February 13, 2020 Share Posted February 13, 2020 (edited) Hi Unraid community, New user of UNRAID I am very enthusiastic about the idea of staying on UNRAID. But I am a little unmotivated by the many crashes. The server has run maximum 1 day without crash. Yesterday the WebGUI no longer worked, today the full server ... Here you will find a screenshot of the page before restarting My config : Rysen 7 2700x MB MSI B450 Gaming plus Max RAM : 32GB PS : 650W Enermax (Old age) 2 SSD cache 3 DD data Docker : Duckdns, Openvpn-as VM : Ubuntu server Could you help me ? Thank you very much and sorry for my bad English I'm French Edited February 13, 2020 by Enkill Quote Link to comment
JorgeB Posted February 13, 2020 Share Posted February 13, 2020 See if this helps: https://forums.unraid.net/topic/46802-faq-for-unraid-v6/?do=findComment&comment=819173 Quote Link to comment
Enkill Posted February 13, 2020 Author Share Posted February 13, 2020 Ok thank you for your reply I already config "Power Supply Idle Control" to "typical current idle" By cons I have two RAM sticks (2x16) and I activate the XMP option (3200Mhz) Do I have to try without XMP mode? It's Crucial Ballistix sport LT CL16 3200 MHz Quote Link to comment
JorgeB Posted February 13, 2020 Share Posted February 13, 2020 Run the RAM without overclocking. Quote Link to comment
Enkill Posted February 13, 2020 Author Share Posted February 13, 2020 ok i will test this and I will share the results TY Quote Link to comment
PSYCHOPATHiO Posted February 13, 2020 Share Posted February 13, 2020 I used to have lots of crashes with the early launch of the Ryzen 1700x but mostly due to the ram incompatibility, eventually I looked at a similar ram in the compatibility table of the motherboard and set the clocks and speeds accordingly. I have the corsair LPX 3200 clocked at 3000 timings at 15-17-17-17-35 & been up for over a week since the last update, if the ram isnt listed you might want to do the same & get the best performance out of the CPU if needed. As @johnnie.black said, you can run without overclocking for a while to see if there are any other underlying factors that might have lead to the kernel panic. Quote Link to comment
Enkill Posted February 13, 2020 Author Share Posted February 13, 2020 Yes I do that ... I am frustrated that I did not take INTEL as usual Quote Link to comment
Enkill Posted February 13, 2020 Author Share Posted February 13, 2020 I switched my server RAM (Crucial Ballistix sport LT CL16 3200 MHz 2x16GB) with my home laptop (Crucial Ballistix sport LT CL16 3000 MHz 4x8GB). I conserved the OC profile for the new RAM (2993Mhz instead of 3200Mhz) The system is stable actually, I will share the results in few days Thank you for your help Quote Link to comment
Enkill Posted February 18, 2020 Author Share Posted February 18, 2020 Hi everybody, I wanted to give you feedback after a few days of use with my new RAM Everything is working properly the server is stable since the change So if it helps someone, here is the hardware configuration that works for me. MB : MSI B450 Gaming plus Max CPU : Ryzen 2700x RAM : Crucial Ballistix sport LT CL16 3000 MHz 4x8GB with OC Mode in BIOS (2993Mhz) Have a good day ! Quote Link to comment
JorgeB Posted February 18, 2020 Share Posted February 18, 2020 Thanks for reporting back. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.