Zedd Posted April 25, 2020 Share Posted April 25, 2020 (edited) Hi all i am new to unraid & still learning. I have a problem i hope someone can help with, Fix common problems has detected an error which reads Your server has detected hardware errors. You should install mcelog via the NerdPack plugin, post your diagnostics and ask for assistance on the unRaid forums. The output of mcelog (if installed) has been logged. i have installed mcelog but do not know how to get the log to post on the forum. any help would be appreciated. Edited April 27, 2020 by Zedd Quote Link to comment
Squid Posted April 25, 2020 Share Posted April 25, 2020 Tools - Diagnostics. Post entire zip file here Quote Link to comment
Zedd Posted April 25, 2020 Author Share Posted April 25, 2020 tower-diagnostics-20200425-1358.zip zip file above thanks Quote Link to comment
Squid Posted April 25, 2020 Share Posted April 25, 2020 Apr 25 11:57:57 Tower root: Hardware event. This is not a software error. Apr 25 11:57:57 Tower root: MCE 0 Apr 25 11:57:57 Tower root: CPU 3 BANK 0 TSC 7fce9dfb56 Apr 25 11:57:57 Tower root: TIME 1587811657 Sat Apr 25 11:47:37 2020 Apr 25 11:57:57 Tower root: MCG status: Apr 25 11:57:57 Tower root: MCi status: Apr 25 11:57:57 Tower root: Corrected error Apr 25 11:57:57 Tower root: Error enabled Apr 25 11:57:57 Tower root: MCA: Internal parity error Apr 25 11:57:57 Tower root: STATUS 9000004000010005 MCGSTATUS 0 Apr 25 11:57:57 Tower root: MCGCAP c09 APICID 6 SOCKETID 0 Apr 25 11:57:57 Tower root: MICROCODE 21 Quick googling suggests that it's either because of an overclock, or is a known issue with your CPU (ie: ignore) You should also power down and reseat the cabling to your Corsair SSD Apr 25 13:16:58 Tower kernel: ata3.00: failed command: WRITE FPDMA QUEUED Apr 25 13:16:58 Tower kernel: ata3.00: cmd 61/00:90:b0:9e:66/06:00:01:00:00/40 tag 18 ncq dma 786432 out Apr 25 13:16:58 Tower kernel: res 40/00:88:b0:94:66/00:00:01:00:00/40 Emask 0x10 (ATA bus error) Apr 25 13:16:58 Tower kernel: ata3.00: status: { DRDY } Apr 25 13:16:58 Tower kernel: ata3: hard resetting link Apr 25 13:16:58 Tower kernel: ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Quote Link to comment
Zedd Posted April 26, 2020 Author Share Posted April 26, 2020 Thanks Squid, I have the setting in unraid set to performance but will check my bios to make sure overclocking is turned off, i think i am having issues with my parity drive and errors but am thinking that is a cable as well going to invest in some new better quality cables. Quote Link to comment
Zedd Posted April 27, 2020 Author Share Posted April 27, 2020 you mentioned my cable to cache drive, I am getting errors on a parity check but when I redo the check the error count is different, do you think this is a cable issue as well? I would have thought a faulty sector would stay faulty. Quote Link to comment
Zedd Posted April 27, 2020 Author Share Posted April 27, 2020 tower-diagnostics-20200427-1025 I thought you might ask, I think file is attached. Quote Link to comment
Zedd Posted April 27, 2020 Author Share Posted April 27, 2020 Tried again tower-diagnostics-20200427-1025.zip Quote Link to comment
JorgeB Posted April 27, 2020 Share Posted April 27, 2020 Apparent connections issues with cache2, replace cables. Quote Link to comment
JorgeB Posted April 27, 2020 Share Posted April 27, 2020 Errors on parity also look like a power/connection issue, it dropped offline. Quote Link to comment
Zedd Posted April 27, 2020 Author Share Posted April 27, 2020 ok thanks, have some new cables ordered after Squid mentioned cache & cable. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.