theprophe Posted August 18, 2020 Share Posted August 18, 2020 Hi, i ended up doing a new configuration on my unraid beacuse i had some red x drives that were due to a pc problem. Anyways after i did it and rebuilt the parity, i can still see my share directories, but alot of them are empty, some are not. Any idea whats going on? Quote Link to comment
JorgeB Posted August 18, 2020 Share Posted August 18, 2020 56 minutes ago, theprophe said: Any idea whats going on? Not without the diagnostics. Quote Link to comment
theprophe Posted August 18, 2020 Author Share Posted August 18, 2020 what should i post? Quote Link to comment
JorgeB Posted August 18, 2020 Share Posted August 18, 2020 Tools -> Diagnostics, please attach the complete zip. Quote Link to comment
theprophe Posted August 18, 2020 Author Share Posted August 18, 2020 Hello, sorry for not knowing, i haven't done thistower-diagnostics-20200818-0848.zip before Quote Link to comment
JorgeB Posted August 18, 2020 Share Posted August 18, 2020 Check filesystem on disk6: https://wiki.unraid.net/Check_Disk_Filesystems P.S: we don't recommend using reiserfs for many years now, you should convert to xfs. Quote Link to comment
trurl Posted August 18, 2020 Share Posted August 18, 2020 Unfortunately, the diagnostics from that old version of Unraid you are using doesn't give us any information about what user shares actually exist. You seem to have over 1000 .cfg files (a record as far as I have seen) in config/shares on the flash drive, many with anonymized names that seem unlikely. I suspect at some point (or possibly different ones at different times) you accidentally created a lot of user shares. Any folder at the top level of cache or array is automatically a user share. The reason I bring this up is because it can make it difficult to give advice regarding your user shares since it looks like you have so many. Open up that diagnostics you posted and you will see what I mean. How many user shares do you actually have? Quote Link to comment
theprophe Posted August 18, 2020 Author Share Posted August 18, 2020 Ok, thanks, i will wait for my parity check to finish and then do it. Do i still have to copy everything off the reiserfs to change to xfs? Quote Link to comment
trurl Posted August 18, 2020 Share Posted August 18, 2020 8 minutes ago, theprophe said: Do i still have to copy everything off the reiserfs to change to xfs? In order to change the filesystem of a disk, it has to be reformatted. So you would have to get all its data saved somewhere else before you can convert it to xfs. Quote Link to comment
theprophe Posted August 18, 2020 Author Share Posted August 18, 2020 (edited) 6 hours ago, trurl said: Unfortunately, the diagnostics from that old version of Unraid you are using doesn't give us any information about what user shares actually exist. You seem to have over 1000 .cfg files (a record as far as I have seen) in config/shares on the flash drive, many with anonymized names that seem unlikely. I suspect at some point (or possibly different ones at different times) you accidentally created a lot of user shares. Any folder at the top level of cache or array is automatically a user share. The reason I bring this up is because it can make it difficult to give advice regarding your user shares since it looks like you have so many. Open up that diagnostics you posted and you will see what I mean. How many user shares do you actually have? Do you mean the main directories when i click on "shares" in unraid, if so about 30 when i clicked to make the diagnostic file there was an option to click anonymized names Edited August 18, 2020 by theprophe typo Quote Link to comment
theprophe Posted August 19, 2020 Author Share Posted August 19, 2020 i checked the filesystem on disk 6 and it said to run the --rebuild-tree option, so i started it. How long does it take around, it has been at this screen for almost 2 hours Quote Link to comment
JorgeB Posted August 19, 2020 Share Posted August 19, 2020 Depends mostly on the disk size, around 2/3 hours per TB. Quote Link to comment
theprophe Posted August 20, 2020 Author Share Posted August 20, 2020 Ok it has finally finished, it has created a directory Lost+found I guess whatever it could recover it put in there, and all the other stuff that it coudn't recover is lost? should i do another diagnostic now? Quote Link to comment
JorgeB Posted August 20, 2020 Share Posted August 20, 2020 3 minutes ago, theprophe said: I guess whatever it could recover it put in there Usually only a few incomplete/partial files are moved there, rest of the data should be where it was, unless there was massive corruption. Quote Link to comment
theprophe Posted August 20, 2020 Author Share Posted August 20, 2020 7.22TB of my 8TB drive were in lost + found. Although most of that is movies should i copy all the stuff to other drives and replace it? How does a disk directory get so screwed up, and how do i know when it happens? and how does it happen? thanks for all your help Quote Link to comment
JorgeB Posted August 20, 2020 Share Posted August 20, 2020 22 minutes ago, theprophe said: How does a disk directory get so screwed up, and how do i know when it happens? It's unusual, but difficult to guess why, could be due to unclean shutdown(s), hardware issue or just a filesystem issue, if it happens again to other disks likely there's some hardware issues, but most likely it was an isolated incident. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.