[email protected] Posted September 2, 2020 Share Posted September 2, 2020 Am trying to get this NIC to work with UnRaid OS: Asus XG-C100C 10G Network Adapter. This adapter is using the Aquantia AQN107 Chipset. I cannot get UnRaid to recognize the NIC as a 10GBE NIC. UnRaid recognizes the NIC, but recognizes as a 1.0 GBE NIC (1,000 mb/sec). How can I install the drivers to make the NIC function on the UnRaid OS level? In Win10, the NIC functions well after driver install, but I would like the NIC to function at 10 GBE on UnRaid... Is this possible? Quote Link to comment
ChatNoir Posted September 3, 2020 Share Posted September 3, 2020 If you are using 6.8.3, you might want to try to update to the 6.9 beta that has much more recent set of drivers, especially for NICs. Quote Link to comment
TheWoodser Posted November 14, 2020 Share Posted November 14, 2020 I have this same NIC and had issues in 6.8.3......After replacing the CAT6 wire, all my issues with the NIC in UNRaid went away. Mine was showing as a 5000GB card, swapped the cable and I am good. Woodser Quote Link to comment
Zonediver Posted November 14, 2020 Share Posted November 14, 2020 On 9/2/2020 at 11:35 PM, [email protected] said: Am trying to get this NIC to work with UnRaid OS: Asus XG-C100C 10G Network Adapter. This adapter is using the Aquantia AQN107 Chipset. I cannot get UnRaid to recognize the NIC as a 10GBE NIC. UnRaid recognizes the NIC, but recognizes as a 1.0 GBE NIC (1,000 mb/sec). How can I install the drivers to make the NIC function on the UnRaid OS level? In Win10, the NIC functions well after driver install, but I would like the NIC to function at 10 GBE on UnRaid... Is this possible? Its a Cable-Problem - wrong cable... use a CAT7 at least. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.