MandicReally Posted October 20, 2020 Share Posted October 20, 2020 (edited) So my UNRAID system was having a bit of hardware trouble. I was sick of the SuperMicro mobo / Xeon combination I've been running so I bought new hardware. Namely an Asrock X570 Phantom Gaming 4 mobo, AMD Ryzen 3400G cpu, 16GB of Corsair LPX RAM (overkill but all they had at the store). When I setup the new hardware it booted right away, I went in and did standard BIOS tweaking, then set my Boot drive to my UNRAID USB stick. When booting, the system just boots directly into the BIOS menu. F11 and try to Force it to boot from the USB Stick, and it does the exact same thing. I tried all of the rear I/O USB ports and the same results. I grabbed a MicroSD card and flashed a new install of UNRAID onto that to try that, same results. The system just won't boot off of the USB drive despite it being set to do so. Anyone have input on this? I found mentions of people running this board and CPU (not together that I found) with UNRAID. Lastly I just updated the BIOS on the board (no change), and made a Windows 10 Install Media to try. The Windows USB Stick booted into the Windows Installer. So for some reason this just isn't booting to the UNRAID sticks. Edited October 22, 2020 by MandicReally Quote Link to comment
MandicReally Posted October 20, 2020 Author Share Posted October 20, 2020 I just dug out the Linux Mint install stick I used last week on an old laptop. That worked. So it seems it is just UNRAID sticks that won't work... I'm confused and haven't found any BIOS settings to make any real change. Quote Link to comment
rachid596 Posted October 20, 2020 Share Posted October 20, 2020 Enable cms support in your bios Envoyé de mon HD1913 en utilisant Tapatalk Quote Link to comment
MandicReally Posted October 20, 2020 Author Share Posted October 20, 2020 6 minutes ago, rachid596 said: Enable cms support in your bios Envoyé de mon HD1913 en utilisant Tapatalk I was worried you would say that. I cannot do that. CMS Support is listed but just says "Disabled" and gives me NO OPTION to turn it on. I'll have to try rolling back a couple BIOS versions and see if the Option was recently removed or contact Asrock. Quote Link to comment
rachid596 Posted October 20, 2020 Share Posted October 20, 2020 Maybe try diables secure boot first Envoyé de mon HD1913 en utilisant Tapatalk Quote Link to comment
MandicReally Posted October 20, 2020 Author Share Posted October 20, 2020 43 minutes ago, rachid596 said: Maybe try diables secure boot first Envoyé de mon HD1913 en utilisant Tapatalk I had to go back 3 BIOS revisions to find one that actually had the CSM menu in it. That worked. Thank you! Quote Link to comment
rachid596 Posted October 20, 2020 Share Posted October 20, 2020 I had to go back 3 BIOS revisions to find one that actually had the CSM menu in it. That worked. Thank you!No problem. Good luck [emoji1303][emoji1303][emoji1303]Envoyé de mon HD1913 en utilisant Tapatalk Quote Link to comment
JorgeB Posted October 21, 2020 Share Posted October 21, 2020 You can also enable UEFI boot in Unraid, just rename EFI- to EFI in the flash drive. Quote Link to comment
DigitalDivide Posted December 12, 2023 Share Posted December 12, 2023 Well, discovered my problem...sort of. I went out an bought a new usb flash drive and downloaded the Unraid USB Creater and installed the free version. It worked! So I'm guessing my usb drive is bad. Question is how do I now use the new usb flash drive. Can I just copy the contents from the old drive to the new one? Do I need to register the new flash drive? It's been quite awhile so not sure what I need to do. Quote Link to comment
DigitalDivide Posted December 12, 2023 Share Posted December 12, 2023 2 minutes ago, DigitalDivide said: Well, discovered my problem...sort of. I went out an bought a new usb flash drive and downloaded the Unraid USB Creater and installed the free version. It worked! So I'm guessing my usb drive is bad. Question is how do I now use the new usb flash drive. Can I just copy the contents from the old drive to the new one? Do I need to register the new flash drive? It's been quite awhile so not sure what I need to do. Just saw this now after trying the new usb flash. I did as you indicated and it worked as well. Great! Now to check my system and get it all working Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.