BenP511 Posted October 31, 2020 Share Posted October 31, 2020 (edited) Hi still on trial for unraid all is great apart from transfer speeds to and from pc... which is obviously quite an issue. Both pc and server are wired via realtek 2.5Gbe to Netgear Nighthawk SX-10. Currently running the beta as its the only one to natively support the realtek lan I would expect over 100MBs reads on the network as my previous NAS netgear Readynas 214 handled it just fine and that was 1Gbe? I have attached some pictures and upload the diagnostics file, any help would be apricated before I take the plunge and buy UPDATE: Reading from the Cache is Fine 200+ MBs and little cpu use, but reading from the array spikes all the cores to near full and is slow around 66MBs server-diagnostics-20201031-1133.zip server-syslog-20201031-1200.zip Edited October 31, 2020 by BenP511 Added SYSLOG Quote Link to comment
Vr2Io Posted October 31, 2020 Share Posted October 31, 2020 (edited) Are you sure no write still flush to disks during read test ? Pls check on "Main" tab for all disk status. Edited October 31, 2020 by Vr2Io Quote Link to comment
BenP511 Posted October 31, 2020 Author Share Posted October 31, 2020 Yeah nothing is flushing mover not invoked, cache is empty Thanks for the help Quote Link to comment
JorgeB Posted November 1, 2020 Share Posted November 1, 2020 21 hours ago, BenP511 said: UPDATE: Reading from the Cache is Fine 200+ MBs and little cpu use, but reading from the array spikes all the cores to near full and is slow around 66MBs Samba aio was enable for -beta30, it won't be for future releases since it can cause low read speeds with some devices, see if this makes any difference: -stop array -go to Settings -> SMB -add to SMB extras: aio read size = 0 -start array and retest 2 Quote Link to comment
BenP511 Posted November 1, 2020 Author Share Posted November 1, 2020 Thank you! all sorted 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.