Juanlusoft Posted December 2, 2020 Share Posted December 2, 2020 I am trying to create an array with 5 sas disks and when I select the disk it disappears from the list and is deleted, not being able to do anything until I give a new installation or restart the system. this is the hardware HP DL380P Gen8 ** 2x2650 / 64gb / 5 * 4tb SAS Seagate Constellation 6Gb / s ST4000NM0023 ** SAS controller DELL Perc H200 it mode I have done the pertinent tests by changing the disks to another computer, changing the sas controller, installing other systems on the computer and the disks work in all tests. any solution? https://youtu.be/ECrEkIrJoUA **************** EDIT ****************** scrutiny analyzes all disks without problem Quote Link to comment
trurl Posted December 2, 2020 Share Posted December 2, 2020 If possible before rebooting and preferably with the array started Go to Tools - Diagnostics and attach the complete Diagnostics ZIP file to your NEXT post in this thread. Quote Link to comment
Juanlusoft Posted December 2, 2020 Author Share Posted December 2, 2020 I attach the diagnostic file tower-diagnostics-20201202-2048.zip Quote Link to comment
Juanlusoft Posted December 2, 2020 Author Share Posted December 2, 2020 update info Quote Link to comment
trurl Posted December 2, 2020 Share Posted December 2, 2020 Looks like 2 disk controllers. Which are you using? Best if you don't attempt to use any RAID mode. Quote Link to comment
Juanlusoft Posted December 2, 2020 Author Share Posted December 2, 2020 Dell perc H200 Quote Link to comment
trurl Posted December 2, 2020 Share Posted December 2, 2020 Is it using IT mode? Quote Link to comment
Juanlusoft Posted December 2, 2020 Author Share Posted December 2, 2020 8 minutes ago, trurl said: Is it using IT mode? Yes Quote Link to comment
JorgeB Posted December 3, 2020 Share Posted December 3, 2020 Disks are Formatted with type 2 protection You need to remove this, you can just google it. Quote Link to comment
trurl Posted December 3, 2020 Share Posted December 3, 2020 Copied thread here since it is not a bug. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.