DevanteWeary

Yeah it's just my server never really gets more than half of its RAM used. (64GB total, around 32GB is used). I just noticed that I had SOME containers pinned and some not pinned. Probably a result of pinning a bunch one time, and then installing more later on. I'll go back and pin everything so that they're not touching cores 0 and 1 and see what happens.

Update: it just froze again. I'm at a loss here. Pretty sure this is gonna fry my drives. devante-nas-diagnostics-20251129-1614.zip

Another follow-up. Just now it froze out of nowhere again, so I guess it wasn't Unraid Connect, although this is the longest it has lasted since it started having the issue. Here's a new diagnostic. Regarding the things @JorgeB said since I forgot to last time... I have 64GB of RAM and it never really gets more than about halfway. This last time it froze, I was directly messing around in the dashboard looking at various plugin settings and the dashboard ran fine. No lag. And my qbit container wasn't laggy either. Within a few minutes, it froze. I actually do pin all my cores, or should I say pin them to all but cores 0 and 1. I set the fuse Descriptors to max (6556848 - it was at 40xxx) and ran touch /boot/config/fastusr and rebooted. I'll see what happens! devante-nas-diagnostics-20251127-2223.zip

hey did you ever figure this out? Trying to find a way to create torrents of files I can share with a friend for easy file share. I know there are other things like FileBrowser or Cloudown... but I wanted to try torrenting.

@JorgeB @trurl Wanted to follow up... I had a hunch so a few days ago I removed the Unraid Connect plugin. Since then, I haven't had an issue. Usually it would have frozen a couple times since then. Every other time that I've had freezing issues over the years and versions (both plugin and Unraid), it has always been due to the Unraid Connect plugin, so I remembered that and looks like that was probably it once again. And on a side note, for a couple months, I have been having this other small issue where my wattage usage has jumped from about 80w idle to 130w idle. I thought it was because I added an HBA LSI and one more drive. However, since I removed Unraid Connect, it has gone back down to 80w~ish idle. So maybe a coincidence, maybe not. I can't use Tailscale at work so absolutely need Unraid Connect unfortunately so not sure what to do since it inevitably ends up freezing my server every single time. But anyway, wanted to update everyone!

OK it just happened again. Sucks man. At this rate, I'm gonna corrupt all my drives having to force the power off nearly everyday. Here's the diagnostic, the syslog-previous, and the current syslog. devante-nas-diagnostics-20251110-1022.zip syslog.txt syslog-previous.txt

Heya. (guess I'm not getting notifications form the forums anymore for some reason). Anyway, I have syslog server enabled. Both locally and to a syslog server (Graylog on the same Unraid server). Actually, I just noticed I have it set to maximum 5MB with 4 files but the actual syslog file is 780 MiB.

OK, this is what it shows: https://pastebin.com/XCJRL0kL

I've been having this issue recently - maybe a month or so - where nearly every other day, at a random time, the server with lock up. First it starts with not being able to access containers, but they're still running (Plex for example), then several minutes later, the containers stop working too. Like right now, I tried to shut down the server and the console is stuck at "Collecting data" after it said it was waiting 600 seconds for graceful shutdown. But I can still access qBittorrent, although it's very laggy. I have a PiKVM so I will remote into the CLI that way and try to log in with root. I put the username root in, then it never prompts me for a password and eventually goes back to asking for a username. I'll press the power button on my case and it'll start shutting down (Sending TERM signal, etc). Then gets to a point where the shutdown stops. Like right now, it's kinda stuck at Generating diagnostics. I end up having to force the computer to shutdown and then on bootup, the parity wants to start. I have NO idea what the issue could even be. Server is about 2 years old, everything was running great until about a month ago. Come to think of it... I may or may have no updated to 7.1.4 around that time. I just... don't know what to look for and can't recreate it since I have no idea where to even start. I was hoping you guys might have some insight based on my diagnostics file. Thank you for any info you guys might have! devante-nas-diagnostics-20251108-1731.zip

Unraid Connect has always been horrible for me man. Like even AS WE SPEAK, my server has frozen for it's third time in two days and I'm pretty positive it's because of Unraid Connect. More than once, whenever I had these locking up issues, uninstalling Unraid Connect has fixed it. I don't understand why they can't get this one plugin down. :/

Awesome thank you! Good to know this exists. I managed to figure out how to make mine look like below... it was just editing the color map like you said. Never found out how to change the actual window elements (titlebar, etc) but from the looks of that site, I guess you can't. Surprised more dark themes aren't on there!! One thing I've tried and tried is to get the taskbar icons to show their titles. So if you ever figure that out, please let me know! Well here's mine now.

I'll try! (I have no idea what to look for in that one list you had me print ha) By the way, update: server is fine this morning so 99% sure it was Unraid Connect (once again) so I'll mark this as solved. Thanks again. :>

@Michael_P Actually didn't take as long as I thought to try and narrow it down. I remembered Unraid Connect locked my machine up a few times before and sure enough, after removing it, my machine is running like butter again. I hope they get this Unraid Connect thing fixed, I use it almost everyday. This is what it usually looks like, even with 50+ containers going...

Yeah I thought it could possibly be all the intro/credit detection for several hundred episodes of shows so I disabled Jellyfin. It shouldn't have been running in that diagnostic but possible I ran that after rebooting. Yes Frigate as well. And I know things can change but I've been running this setup for over a year (honestly probably 2+) with no issues. Even did the same thing (imported shows with hundreds of episodes. All the while Frigate, JF, and Plex running. I have like... at least 50 containers running ha. CPU averages around 60% and RAM about 32GB (half). I was hoping something in the diagnostic would flat out say what's happening. But yeah looks like I'll have to do process of elimination. Thanks for trying to help. :>

OK, here's what ps -auxf shows. I should say, those interface log messages have been around for well over a year and this issue has only started a few days ago. One of those things I keep meaning to troubleshoot but kind of no idea how. I figured they were harming anything though. auxf.txt

Issues started a few days ago. Every morning when I wake up, the server is completely unresponsive aside from being able to login in via command line and being able to run HTOP. But even then, half the time even the command line is locked up. The only two things that pop into my mind are: 1) My Appdata Backup/Restore plugins runs around 5am and takes about an hour or a little more. It's not running when I wake up though. 2) Imported a ton of shows into Plex and I do have it configured to detect credits, intros, etc. However it doesn't lock up until the morning and pretty sure all those detections have already been finished. Just randomly thinking what it could be. Here's a screenshot and my diagnostic. If I scroll over, it says log-level=fatal. Thanks for any advice! devante-nas-diagnostics-20250716-0658.zip

Definitely will and also good catch on the every post thing. I was wondering that for /OpenSignups

This is amazing man. Thank you. I use IFTTT for this so as not to miss any free games that get posted to the various game deals subreddits, but hate paying $3 a month. Lemme ask, is it possible to have it either use RegEx or have a "NOT" denotion? For instance, this is my IFTTT trigger: title:(free OR 100%) NOT ("Shipping" OR "Gift" OR "DRM" OR "get 1") subreddit:ConsoleDeals So I try to remove the ones that are just "Free Shipping" or "Free Gift" or "DRM Free", Buy one get 1 free" etc.

Hey sorry, forgot all about this! So I uninstalled and reinstalled and that didn't fix it. Then I turned ON SSL connection and that seems to have worked. This was the output of what you asked BEFORE selecting SSL. I had a single user watching an episode of The Office, but it was showing three times. Turning on SSL made it show just once. https://pastebin.com/mUMuq9WE

Awesome. THank you!

Awesome. Thanks for the tip! Question: how are we supposed to use your tip? I cleared out the custom CSS and put yours in with my own path/file and it turned my dashboard almost completely white (I have a dark theme).

Dang I swear I searched for "potentially dangerous mode". Thank you!

Was checking my sent box in my gmail and noticed I had several emails titled "cron for user root /usr/bin/run-parts /etc/cron.daily 1> /dev/null" sent to "Root access account <my email address>" And the body is : warning: Potentially dangerous mode on unraid-api: 0666 error: Ignoring unraid-api because it is writable by group or others. warning: Potentially dangerous mode on unraid-api.patch: 0666 error: Ignoring unraid-api.patch because it is writable by group or others. and has been everyday since at the same time-ish. What could it be? Not really sure what I changed around then. Possibly updated to v7? Here's my diagnostics. devante-nas-diagnostics-20250323-1735.zip

OK, I had Grok create a quick script to back these up to a folder of your choice so you don't have to go digging through the USB backup. This is considering I have a share called Backups. Change destination directory to whatever you guys use. #!/bin/bash # Source directory SOURCE="/boot/config/plugins/user.scripts/scripts" # Base destination directory BASE_DEST="/mnt/user/Backups/Server/Scripts" # Get current date in YYYY-MM-DD format DATE=$(date +%Y-%m-%d) # Full destination path with date DEST="$BASE_DEST/$DATE" # Create destination directory if it doesn't exist mkdir -p "$DEST" # Copy all contents from source to destination # -r: recursive copy # -p: preserve file attributes # -v: verbose output to see what's being copied cp -rpv "$SOURCE"/* "$DEST/" # Check if the copy was successful if [ $? -eq 0 ]; then echo "Backup completed successfully to $DEST!" else echo "Error: Backup failed!" fi

Hey just sitting here creating a script to remove tags automatically from qBittorrent (hate how cross-seed forces a tag) and realize how much for granted I take User Scripts. Just wondering if there's a way to backup all these scripts I've accumulated over time!