bally12345

Damn! I need to do something about this, the worst thing is recently noticed 3 plex streams maxing out both cpus. Sent from my SM-G930F using Tapatalk

This is my current usage but don't know how accurate these smart life smart plugs are. Sent from my SM-G930F using Tapatalk

Found the setting and updated my signature, I need to upgrade as I believe my rig is using atleast 8 year old hardware

Logged on laptop to see your sig but wasnt there lol might be the theme I am using. Looks like my replies aren't adding my sig either. I will have a look at Domoticz

Not seeing signatures for some reason, what are you using to log?

Here's a slightly different angle on the question what is considered a reasonable amount of power consumption? Sent from my SM-G930F using Tapatalk

I pretty much always enable srt subs but it's only recently iv seen it. Dual xeons 12 core 24 threads with 24gb ram. Disks speeds are fine AFAIK but wondering if its because the disks were spun down. Sent from my SM-G930F using Tapatalk

For some annoying reason recently I keep getting server not powerful enough message. I did eventually change my plex to transcode to ram rather than ssd but looking at stats I'm not hitting anywhere near using the 24gb ram. Hoping it's just a version thing and will be fixed in a next update. Has anyone else experienced the same? Sent from my SM-G930F using Tapatalk

Happy new year folks. I am looking for something more update to date and power efficient currently running MB: Supermicro - X8DT3 CPU: Intel[emoji2400] Xeon[emoji2400] CPU E5645 @ 2.40GHz x2 RAM: 24GB ECC But daily power usage is around 4 KW.h and as the system is running 24/7 its just no longer practical. So for 2019 I will be looking to upgrading motherboard and cpu and dropping the ECC ram. Hopefully I can just lift and shift and everything will continue to work. Any suggestions for a good combo would be welcome. No interest in gaming and must be suitable for 2u supermicro chassis. Main requirementa are to have high passmark for plex, run a couple of VMs and be more power efficient than what I currently have. Sent from my SM-G930F using Tapatalk

That did the trick! Many thanks and have a great new year!!

This has been asked a few times and 75% sure I know what the issue is but might be wrong... So here goes I have VM on Unraid 6.6.6 in the template Network Bridge is set to "virbr0" which puts it on the following ip 192.168.122.139 and the gateway is 192.168.122.1. Win10 Pro, RDP enabled and allowed through firewall but my unraid server is on 192.168.1.3 and I am currently on another machine that uses VPN to access unraid so its not allowing me access. I think the VM needs to be on same gateway as unraid which will allow me to access it using RDP on my laptop? I cheked the network settings and its not set to public, file discovery is enabled but once I am on the VM it doesn't see anything else and I cannot even map network shares. I am guessing if im on the same network I should just be able to enter 192.168.122.139 and it will work but because I am using VPN to access the network to access a VM its not playing ball? The only other thing I can think of is I might need to do some changes on my Asus router to allow the connection but leaning towards to a VM config. Any help would be great :)

If you are running unbalance. I am assuming you moving your media and plex is constantly scanning your library. Probably best to stop your docker until whatever you are moving is done. Sent from my SM-G930F using Tapatalk

This is something that has been bugging me a bit, so I thought I would check to see what others users power consumption looks like and see if whether I can improve anything. I currently have supermicro system with 1200w redundant power supply. Total overkill for me but got a great deal on a refurb system on ebay. Currently it looks I am using around 4.25(KW.h) a day according to the smart plug its connected to. Would be interesting to see what others users are using who run their system 24/7 Sent from my SM-G930F using Tapatalk

Also most modern routers from asus, netgear, tp link etc allow you to plug in your printer too if its USB only and share it over your network.

Hi started using this a bit more now that I have the space again, noticed some shows will download, move when completed and update in plex, but in Sonarr it still shows eg 0/30 but it seems random and only with some shows eg Cosmos (2014) anyone experienced similar?

Strangely enough that worked! But I thought /user/appdata was the same as /cache/appdata/ Sent from my SM-G930F using Tapatalk

I have my appdata on my ssd with the cache set to to preferred. Would it be worth trying a new user share not on the ssd? The weird thing for me is CP, Sabnzbd, Plex, Sonarr and Transmission all running perfectly fine. Sent from my SM-G930F using Tapatalk

Diagnostics added http://cloud.tapatalk.com/s/5be8b4dce8b79/server-diagnostics-20181111-2258.zip Sent from my SM-G930F using Tapatalk

I get the same with binhex so it's got be either unraid or docker. I did copy everything over from an old USB could there be something on boot drive that needs clearing. [v0.2.0.1120] NzbDrone.Core.Datastore.CorruptDatabaseException: Database file: /config/nzbdrone.db is corrupt, restore from backup if available. See: https://github.com/Radarr/Radarr/wiki/FAQ#i-am-getting-an-error-database-disk-image-is-malformed ---> System.Data.SQLite.SQLiteException: disk I/O errordisk I/O error Sent from my SM-G930F using Tapatalk

I could try binhex to see if i get same issue I suppose. root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='radarr' --net='bridge' -e TZ="Europe/London" -e HOST_OS="Unraid" -e 'PUID'='99' -e 'PGID'='100' -p '7878:7878/tcp' -v '/mnt/user/Downloads/SAB/':'/downloads':'rw' -v '/mnt/user/Downloads/Movies/':'/movies':'rw' -v '/mnt/user/appdata/lsio-radarr':'/config':'rw' 'linuxserver/radarr' Unable to find image 'linuxserver/radarr:latest' locallylatest: Pulling from linuxserver/radarr56d9dc91333b: Already exists1356b0cfc067: Already exists155f3c53d4a5: Already exists05088c205b6d: Already exists112068b0fa4e: Already exists2ff5dd4a0d9b: Already exists7dd87385ca73: Already existsd966d969c7cd: Already exists32be887422dd: Already existsc4667be536dd: Pulling fs layercf1405c88e73: Pulling fs layercf1405c88e73: Verifying Checksumcf1405c88e73: Download completec4667be536dd: Download completec4667be536dd: Pull completecf1405c88e73: Pull completeDigest: sha256:9dd4ef34bbb8ff6e2284d8372299a59996dd7183818b6d9d23bcb8caee4e0474Status: Downloaded newer image for linuxserver/radarr:latest7207870cacadaf10278c4b0ae8580229d987d9e63c86bf8497f590fcf4b57dfdThe command finished successfully! The error just loops and causing everything to slow down. Strange one [emoji848] Sent from my SM-G930F using Tapatalk

I get the same with /config pointing to /mnt/user/appdata/radarr-new Also did cleanup appdata... Does it install sqlite or does it need to be activated by nerd tools? Sent from my SM-G930F using Tapatalk Actually sqlite must be running if Sonarr works?

I am trying to start radarr but it refuese to work. I have tried deleting appdata and downloading again but nothing. ErrorWarningSystemArrayLogin[s6-init] making user provided files available at /var/run/s6/etc...exited 0.[s6-init] ensuring user provided files have correct perms...exited 0.[fix-attrs.d] applying ownership & permissions fixes...[fix-attrs.d] done.[cont-init.d] executing container initialization scripts...[cont-init.d] 10-adduser: executing...-------------------------------------_ ()| | ___ _ __| | / __| | | / \| | \__ \ | | | () ||_| |___/ |_| \__/Brought to you by linuxserver.ioWe gratefully accept donations at:https://www.linuxserver.io/donate/-------------------------------------GID/UID-------------------------------------User uid: 99User gid: 100-------------------------------------[cont-init.d] 10-adduser: exited 0.[cont-init.d] 30-config: executing...[cont-init.d] 30-config: exited 0.[cont-init.d] done.[services.d] starting services[services.d] done.[info] Bootstrap: Starting Radarr - /opt/radarr/Radarr.exe - Version 0.2.0.1216[info] AppFolderInfo: Data directory is being overridden to [/config][info] Router: Application mode: Interactive[info] MigrationLogger: *** Migrating data source=/config/nzbdrone.db;cache size=-10485760;datetimekind=Utc;journal mode=Wal;pooling=True;version=3 ***[Fatal] ConsoleApp: EPIC FAIL![v0.2.0.1216] NzbDrone.Core.Datastore.CorruptDatabaseException: Database file: /config/nzbdrone.db is corrupt, restore from backup if available. See: https://github.com/Radarr/Radarr/wiki/FAQ#i-am-getting-an-error-database-disk-image-is-malformed ---> System.Data.SQLite.SQLiteException: disk I/O errordisk I/O errorat System.Data.SQLite.SQLite3.Prepare (System.Data.SQLite.SQLiteConnection cnn, System.String strSql, System.Data.SQLite.SQLiteStatement previous, System.UInt32 timeoutMS, System.String& strRemain) [0x0033c] in :0at System.Data.SQLite.SQLiteCommand.BuildNextCommand () [0x000f6] in :0at System.Data.SQLite.SQLiteCommand.GetStatement (System.Int32 index) [0x00008] in :0at (wrapper remoting-invoke-with-check) System.Data.SQLite.SQLiteCommand.GetStatement(int)at System.Data.SQLite.SQLiteDataReader.NextResult () [0x0011e] in :0at System.Data.SQLite.SQLiteDataReader..ctor (System.Data.SQLite.SQLiteCommand cmd, System.Data.CommandBehavior behave) [0x00090] in :0at (wrapper remoting-invoke-with-check) System.Data.SQLite.SQLiteDataReader..ctor(System.Data.SQLite.SQLiteCommand,System.Data.CommandBehavior)at System.Data.SQLite.SQLiteCommand.ExecuteReader (System.Data.CommandBehavior behavior) [0x0000c] in :0at System.Data.SQLite.SQLiteCommand.ExecuteNonQuery (System.Data.CommandBehavior behavior) [0x00006] in :0at System.Data.SQLite.SQLiteCommand.ExecuteNonQuery () [0x00006] in :0at System.Data.SQLite.SQLiteConnection.Open () [0x00959] in :0at FluentMigrator.Runner.Processors.GenericProcessorBase.EnsureConnectionIsOpen () [0x0000e] in C:\Users\Mark\Source\Repos\fluentmigrator\src\FluentMigrator.Runner\Processors\GenericProcessorBase.cs:54at FluentMigrator.Runner.Processors.SQLite.SQLiteProcessor.Exists (System.String template, System.Object[] args) [0x00000] in C:\Users\Mark\Source\Repos\fluentmigrator\src\FluentMigrator.Runner\Processors\SQLite\SQLiteProcessor.cs:78at FluentMigrator.Runner.Processors.SQLite.SQLiteProcessor.TableExists (System.String schemaName, System.String tableName) [0x00000] in C:\Users\Mark\Source\Repos\fluentmigrator\src\FluentMigrator.Runner\Processors\SQLite\SQLiteProcessor.cs:47at FluentMigrator.Runner.VersionLoader.get_AlreadyCreatedVersionTable () [0x00000] in C:\Users\Mark\Source\Repos\fluentmigrator\src\FluentMigrator.Runner\VersionLoader.cs:124at FluentMigrator.Runner.VersionLoader.LoadVersionInfo () [0x00028] in C:\Users\Mark\Source\Repos\fluentmigrator\src\FluentMigrator.Runner\VersionLoader.cs:160at FluentMigrator.Runner.VersionLoader..ctor (FluentMigrator.Runner.IMigrationRunner runner, FluentMigrator.Infrastructure.IAssemblyCollection assemblies, FluentMigrator.IMigrationConventions conventions) [0x00077] in C:\Users\Mark\Source\Repos\fluentmigrator\src\FluentMigrator.Runner\VersionLoader.cs:50at FluentMigrator.Runner.MigrationRunner..ctor (FluentMigrator.Infrastructure.IAssemblyCollection assemblies, FluentMigrator.Runner.Initialization.IRunnerContext runnerContext, FluentMigrator.IMigrationProcessor processor) [0x00167] in C:\Users\Mark\Source\Repos\fluentmigrator\src\FluentMigrator.Runner\MigrationRunner.cs:102at FluentMigrator.Runner.MigrationRunner..ctor (System.Reflection.Assembly assembly, FluentMigrator.Runner.Initialization.IRunnerContext runnerContext, FluentMigrator.IMigrationProcessor processor) [0x00000] in C:\Users\Mark\Source\Repos\fluentmigrator\src\FluentMigrator.Runner\MigrationRunner.cs:72at NzbDrone.Core.Datastore.Migration.Framework.MigrationController.Migrate (System.String connectionString, NzbDrone.Core.Datastore.Migration.Framework.MigrationContext migrationContext) [0x000b5] in C:\projects\radarr-usby1\src\NzbDrone.Core\Datastore\Migration\Framework\MigrationController.cs:58at NzbDrone.Core.Datastore.DbFactory.Create (NzbDrone.Core.Datastore.Migration.Framework.MigrationContext migrationContext) [0x00048] in C:\projects\radarr-usby1\src\NzbDrone.Core\Datastore\DbFactory.cs:84--- End of inner exception stack trace ---at NzbDrone.Core.Datastore.DbFactory.Create (NzbDrone.Core.Datastore.Migration.Framework.MigrationContext migrationContext) [0x00121] in C:\projects\radarr-usby1\src\NzbDrone.Core\Datastore\DbFactory.cs:116at NzbDrone.Core.Datastore.DbFactory.Create (NzbDrone.Core.Datastore.Migration.Framework.MigrationType migrationType) [0x00000] in C:\projects\radarr-usby1\src\NzbDrone.Core\Datastore\DbFactory.cs:56at NzbDrone.Core.Datastore.DbFactory.RegisterDatabase (NzbDrone.Common.Composition.IContainer container) [0x00000] in C:\projects\radarr-usby1\src\NzbDrone.Core\Datastore\DbFactory.cs:36at Radarr.Host.NzbDroneServiceFactory.Start () [0x00012] in C:\projects\radarr-usby1\src\NzbDrone.Host\ApplicationServer.cs:62at Radarr.Host.Router.Route (Radarr.Host.ApplicationModes applicationModes) [0x00067] in C:\projects\radarr-usby1\src\NzbDrone.Host\Router.cs:38at Radarr.Host.Bootstrap.Start (Radarr.Host.ApplicationModes applicationModes, NzbDrone.Common.EnvironmentInfo.StartupContext startupContext) [0x0003d] in C:\projects\radarr-usby1\src\NzbDrone.Host\Bootstrap.cs:73at Radarr.Host.Bootstrap.Start (NzbDrone.Common.EnvironmentInfo.StartupContext startupContext, Radarr.Host.IUserAlert userAlert, System.Action`1[T] startCallback) [0x00075] in C:\projects\radarr-usby1\src\NzbDrone.Host\Bootstrap.cs:39at NzbDrone.Console.ConsoleApp.Main (System.String[] args) [0x00029] in C:\projects\radarr-usby1\src\NzbDrone.Console\ConsoleApp.cs:35Press enter to exit...[info] MigrationLogger: *** Migrating data source=/config/nzbdrone.db;cache size=-10485760;datetimekind=Utc;journal mode=Wal;pooling=True;version=3 ***[Fatal] ConsoleApp: EPIC FAIL![v0.2.0.1216] NzbDrone.Core.Datastore.CorruptDatabaseException: Database file: /config/nzbdrone.db is corrupt, restore from backup if available. See: https://github.com/Radarr/Radarr/wiki/FAQ#i-am-getting-an-error-database-disk-image-is-malformed ---> System.Data.SQLite.SQLiteException: disk I/O errordisk I/O errorat System.Data.SQLite.SQLite3.Prepare (System.Data.SQLite.SQLiteConnection cnn, System.String strSql, System.Data.SQLite.SQLiteStatement previous, System.UInt32 timeoutMS, System.String& strRemain) [0x0033c] in :0at System.Data.SQLite.SQLiteCommand.BuildNextCommand () [0x000f6] in :0at System.Data.SQLite.SQLiteCommand.GetStatement (System.Int32 index) [0x00008] in :0at (wrapper remoting-invoke-with-check) System.Data.SQLite.SQLiteCommand.GetStatement(int)at System.Data.SQLite.SQLiteDataReader.NextResult () [0x0011e] in :0at System.Data.SQLite.SQLiteDataReader..ctor (System.Data.SQLite.SQLiteCommand cmd, System.Data.CommandBehavior behave) [0x00090] in :0at (wrapper remoting-invoke-with-check) System.Data.SQLite.SQLiteDataReader..ctor(System.Data.SQLite.SQLiteCommand,System.Data.CommandBehavior)at System.Data.SQLite.SQLiteCommand.ExecuteReader (System.Data.CommandBehavior behavior) [0x0000c] in :0at System.Data.SQLite.SQLiteCommand.ExecuteNonQuery (System.Data.CommandBehavior behavior) [0x00006] in :0at System.Data.SQLite.SQLiteCommand.ExecuteNonQuery () [0x00006] in :0at System.Data.SQLite.SQLiteConnection.Open () [0x00959] in :0at FluentMigrator.Runner.Processors.GenericProcessorBase.EnsureConnectionIsOpen () [0x0000e] in C:\Users\Mark\Source\Repos\fluentmigrator\src\FluentMigrator.Runner\Processors\GenericProcessorBase.cs:54at FluentMigrator.Runner.Processors.SQLite.SQLiteProcessor.Exists (System.String template, System.Object[] args) [0x00000] in C:\Users\Mark\Source\Repos\fluentmigrator\src\FluentMigrator.Runner\Processors\SQLite\SQLiteProcessor.cs:78at FluentMigrator.Runner.Processors.SQLite.SQLiteProcessor.TableExists (System.String schemaName, System.String tableName) [0x00000] in C:\Users\Mark\Source\Repos\fluentmigrator\src\FluentMigrator.Runner\Processors\SQLite\SQLiteProcessor.cs:47at FluentMigrator.Runner.VersionLoader.get_AlreadyCreatedVersionTable () [0x00000] in C:\Users\Mark\Source\Repos\fluentmigrator\src\FluentMigrator.Runner\VersionLoader.cs:124at FluentMigrator.Runner.VersionLoader.LoadVersionInfo () [0x00028] in C:\Users\Mark\Source\Repos\fluentmigrator\src\FluentMigrator.Runner\VersionLoader.cs:160at FluentMigrator.Runner.VersionLoader..ctor (FluentMigrator.Runner.IMigrationRunner runner, FluentMigrator.Infrastructure.IAssemblyCollection assemblies, FluentMigrator.IMigrationConventions conventions) [0x00077] in C:\Users\Mark\Source\Repos\fluentmigrator\src\FluentMigrator.Runner\VersionLoader.cs:50at FluentMigrator.Runner.MigrationRunner..ctor (FluentMigrator.Infrastructure.IAssemblyCollection assemblies, FluentMigrator.Runner.Initialization.IRunnerContext runnerContext, FluentMigrator.IMigrationProcessor processor) [0x00167] in C:\Users\Mark\Source\Repos\fluentmigrator\src\FluentMigrator.Runner\MigrationRunner.cs:102at FluentMigrator.Runner.MigrationRunner..ctor (System.Reflection.Assembly assembly, FluentMigrator.Runner.Initialization.IRunnerContext runnerContext, FluentMigrator.IMigrationProcessor processor) [0x00000] in C:\Users\Mark\Source\Repos\fluentmigrator\src\FluentMigrator.Runner\MigrationRunner.cs:72at NzbDrone.Core.Datastore.Migration.Framework.MigrationController.Migrate (System.String connectionString, NzbDrone.Core.Datastore.Migration.Framework.MigrationContext migrationContext) [0x000b5] in C:\projects\radarr-usby1\src\NzbDrone.Core\Datastore\Migration\Framework\MigrationController.cs:58at NzbDrone.Core.Datastore.DbFactory.Create (NzbDrone.Core.Datastore.Migration.Framework.MigrationContext migrationContext) [0x00048] in C:\projects\radarr-usby1\src\NzbDrone.Core\Datastore\DbFactory.cs:84--- End of inner exception stack trace ---at NzbDrone.Core.Datastore.DbFactory.Create (NzbDrone.Core.Datastore.Migration.Framework.MigrationContext migrationContext) [0x00121] in C:\projects\radarr-usby1\src\NzbDrone.Core\Datastore\DbFactory.cs:116at NzbDrone.Core.Datastore.DbFactory.Create (NzbDrone.Core.Datastore.Migration.Framework.MigrationType migrationType) [0x00000] in C:\projects\radarr-usby1\src\NzbDrone.Core\Datastore\DbFactory.cs:56at NzbDrone.Core.Datastore.DbFactory.RegisterDatabase (NzbDrone.Common.Composition.IContainer container) [0x00000] in C:\projects\radarr-usby1\src\NzbDrone.Core\Datastore\DbFactory.cs:36at Radarr.Host.NzbDroneServiceFactory.Start () [0x00012] in C:\projects\radarr-usby1\src\NzbDrone.Host\ApplicationServer.cs:62at Radarr.Host.Router.Route (Radarr.Host.ApplicationModes applicationModes) [0x00067] in C:\projects\radarr-usby1\src\NzbDrone.Host\Router.cs:38at Radarr.Host.Bootstrap.Start (Radarr.Host.ApplicationModes applicationModes, NzbDrone.Common.EnvironmentInfo.StartupContext startupContext) [0x0003d] in C:\projects\radarr-usby1\src\NzbDrone.Host\Bootstrap.cs:73at Radarr.Host.Bootstrap.Start (NzbDrone.Common.EnvironmentInfo.StartupContext startupContext, Radarr.Host.IUserAlert userAlert, System.Action`1[T] startCallback) [0x00075] in C:\projects\radarr-usby1\src\NzbDrone.Host\Bootstrap.cs:39at NzbDrone.Console.ConsoleApp.Main (System.String[] args) [0x00029] in C:\projects\radarr-usby1\src\NzbDrone.Console\ConsoleApp.cs:35Press enter to exit...[info] Bootstrap: Starting Radarr - /opt/radarr/Radarr.exe - Version 0.2.0.1216[info] AppFolderInfo: Data directory is being overridden to [/config][info] Router: Application mode: Interactive[info] MigrationLogger: *** Migrating data source=/config/nzbdrone.db;cache size=-10485760;datetimekind=Utc;journal mode=Wal;pooling=True;version=3 ***[Fatal] ConsoleApp: EPIC FAIL![v0.2.0.1216] NzbDrone.Core.Datastore.CorruptDatabaseException: Database file: /config/nzbdrone.db is corrupt, restore from backup if available. See: https://github.com/Radarr/Radarr/wiki/FAQ#i-am-getting-an-error-database-disk-image-is-malformed ---> System.Data.SQLite.SQLiteException: disk I/O errordisk I/O errorat System.Data.SQLite.SQLite3.Prepare (System.Data.SQLite.SQLiteConnection cnn, System.String strSql, System.Data.SQLite.SQLiteStatement previous, System.UInt32 timeoutMS, System.String& strRemain) [0x0033c] in :0at System.Data.SQLite.SQLiteCommand.BuildNextCommand () [0x000f6] in :0at System.Data.SQLite.SQLiteCommand.GetStatement (System.Int32 index) [0x00008] in :0at (wrapper remoting-invoke-with-check) System.Data.SQLite.SQLiteCommand.GetStatement(int)at System.Data.SQLite.SQLiteDataReader.NextResult () [0x0011e] in :0at System.Data.SQLite.SQLiteDataReader..ctor (System.Data.SQLite.SQLiteCommand cmd, System.Data.CommandBehavior behave) [0x00090] in :0 Was a bit confused seeing C:\Users\Mark\Source\..... in the logs and this confirmed something was wrong [Fatal] ConsoleApp: EPIC FAIL! Does anyone know what I need to do to get this started? The mappings are correct and app data is pointing to default location. I also have lsio Sonarr running and that works fine. Sent from my SM-G930F using Tapatalk

I recently added a block account and has made a big difference. Main: UsenetServer Block: Usenetfarm There was some halloween deals and no doubt there will be black friday deals coming up

Yep big typo, dont know why I put /usr/ All my shares are /mnt/user/ I did see MC seems a nice simply way to get stuff, just get it all set correctly and hit F6, will look at Krusader too Thanks for the input

Hi Guys, Since upgrading my server and getting everything up and running, I am thinking of doing some house keeping and moving some folders about from usershares. Currently my whole movie collection is in /mnt/user/Downloads/Movies/ Where as all my TV Shows are in /mnt/usr/Videos/TV Shows/ Everything is already mapped but would just look neater I guess if I had all the movies in /mnt/usr/Videos/Movies/ or even replace Videos to Media folder. Any tips on the fastest way to achieve this or am I just overthinking it. Also don't want to end up with duplicates or confuse Plex. I guess /mnt/usr/Downloads/ should be for all downloads awaiting processing by CP or Sonarr.