tooviral

Members
  • Posts

    63
  • Joined

  • Last visited

Everything posted by tooviral

  1. Same error here. Have tried "killall -9 rclone" but dosent work. Prob because of mount points
  2. Seems like this was the problem Had to delete some files, and ran the commands @johnnie.black mentioned. Haven't seen an error yet. Any way to prevent this from happening. This has been the second time I've had to do a balance.
  3. Had this crop up in my system today. Oct 13 16:06:44 Tower kernel: loop: Write error at byte offset 715571200, length 4096. Oct 13 16:06:44 Tower kernel: blk_update_request: I/O error, dev loop0, sector 1397600 Oct 13 16:06:44 Tower kernel: BTRFS error (device loop0): bdev /dev/loop0 errs: wr 2, rd 0, flush 0, corrupt 0, gen 0 Oct 13 16:06:44 Tower kernel: loop: Write error at byte offset 715591680, length 4096. Oct 13 16:06:44 Tower kernel: blk_update_request: I/O error, dev loop0, sector 1397632 Oct 13 16:06:44 Tower kernel: BTRFS error (device loop0): bdev /dev/loop0 errs: wr 3, rd 0, flush 0, corrupt 0, gen 0 Oct 13 16:06:44 Tower kernel: loop: Write error at byte offset 1789317120, length 4096. Oct 13 16:06:44 Tower kernel: blk_update_request: I/O error, dev loop0, sector 3494752 Oct 13 16:06:44 Tower kernel: BTRFS error (device loop0): bdev /dev/loop0 errs: wr 4, rd 0, flush 0, corrupt 0, gen 0 Oct 13 16:06:44 Tower kernel: loop: Write error at byte offset 1789333504, length 4096. Oct 13 16:06:44 Tower kernel: blk_update_request: I/O error, dev loop0, sector 3494784 Oct 13 16:06:44 Tower kernel: BTRFS error (device loop0): bdev /dev/loop0 errs: wr 5, rd 0, flush 0, corrupt 0, gen 0 Oct 13 16:06:44 Tower kernel: loop: Write error at byte offset 2411786240, length 4096. Oct 13 16:06:44 Tower kernel: blk_update_request: I/O error, dev loop0, sector 4710512 Oct 13 16:06:44 Tower kernel: loop: Write error at byte offset 2411913216, length 4096. Oct 13 16:06:44 Tower kernel: blk_update_request: I/O error, dev loop0, sector 4710767 Oct 13 16:06:44 Tower kernel: BTRFS error (device loop0): bdev /dev/loop0 errs: wr 6, rd 0, flush 0, corrupt 0, gen 0 Oct 13 16:06:44 Tower kernel: loop: Write error at byte offset 2520440832, length 4096. Oct 13 16:06:44 Tower kernel: blk_update_request: I/O error, dev loop0, sector 4922736 Oct 13 16:06:44 Tower kernel: BTRFS error (device loop0): bdev /dev/loop0 errs: wr 7, rd 0, flush 0, corrupt 0, gen 0 Oct 13 16:06:44 Tower kernel: loop: Write error at byte offset 2556149760, length 4096. Oct 13 16:06:44 Tower kernel: blk_update_request: I/O error, dev loop0, sector 4992480 Oct 13 16:06:44 Tower kernel: loop: Write error at byte offset 2556280832, length 4096. Oct 13 16:06:44 Tower kernel: blk_update_request: I/O error, dev loop0, sector 4992735 Oct 13 16:06:44 Tower kernel: BTRFS error (device loop0): bdev /dev/loop0 errs: wr 8, rd 0, flush 0, corrupt 0, gen 0 Oct 13 16:06:44 Tower kernel: loop: Write error at byte offset 2411782144, length 4096. Oct 13 16:06:44 Tower kernel: blk_update_request: I/O error, dev loop0, sector 4710512 Oct 13 16:06:44 Tower kernel: BTRFS error (device loop0): bdev /dev/loop0 errs: wr 9, rd 0, flush 0, corrupt 0, gen 0 Oct 13 16:06:45 Tower kernel: BTRFS error (device loop0): bdev /dev/loop0 errs: wr 10, rd 0, flush 0, corrupt 0, gen 0 Oct 13 16:06:45 Tower kernel: BTRFS error (device loop0): bdev /dev/loop0 errs: wr 11, rd 0, flush 0, corrupt 0, gen 0 Oct 13 16:06:48 Tower kernel: BTRFS: error (device loop0) in btrfs_commit_transaction:2227: errno=-5 IO failure (Error while writing out transaction) Oct 13 16:06:48 Tower kernel: BTRFS info (device loop0): forced readonly Oct 13 16:06:48 Tower kernel: BTRFS warning (device loop0): Skipping commit of aborted transaction. Oct 13 16:06:48 Tower kernel: ------------[ cut here ]------------ Oct 13 16:06:48 Tower kernel: WARNING: CPU: 11 PID: 21502 at fs/btrfs/transaction.c:1850 cleanup_transaction+0x8c/0x238 Oct 13 16:06:48 Tower kernel: BTRFS: Transaction aborted (error -5) Oct 13 16:06:48 Tower kernel: Modules linked in: md_mod iptable_mangle ip_tables bonding ixgbe ptp pps_core mdio x86_pkg_temp_thermal coretemp kvm_intel mpt3sas i2c_i801 ahci i2c_smbus kvm raid_class i2c_core libahci megaraid_sas scsi_transport_sas wmi ipmi_si [last unloaded: pps_core] Oct 13 16:06:48 Tower kernel: CPU: 11 PID: 21502 Comm: dockerd Not tainted 4.9.30-unRAID #1 Oct 13 16:06:48 Tower kernel: Hardware name: Supermicro X9DRH-7TF/7F/iTF/iF/X9DRH-7TF/7F/iTF/iF, BIOS 3.2a 06/18/2016 Oct 13 16:06:48 Tower kernel: ffffc9001a7a3c78 ffffffff813a4a1b ffffc9001a7a3cc8 ffffffff8196b262 Oct 13 16:06:48 Tower kernel: ffffc9001a7a3cb8 ffffffff8104d0d9 0000073a1a7a3d30 ffff883fc58adef0 Oct 13 16:06:48 Tower kernel: ffff881fefbf6800 ffff883fd63d6aa0 00000000fffffffb 0000000000000000 Oct 13 16:06:48 Tower kernel: Call Trace: Oct 13 16:06:48 Tower kernel: [<ffffffff813a4a1b>] dump_stack+0x61/0x7e Oct 13 16:06:48 Tower kernel: [<ffffffff8104d0d9>] __warn+0xb8/0xd3 Oct 13 16:06:48 Tower kernel: [<ffffffff8104d13a>] warn_slowpath_fmt+0x46/0x4e Oct 13 16:06:48 Tower kernel: [<ffffffff812eeff1>] cleanup_transaction+0x8c/0x238 Oct 13 16:06:48 Tower kernel: [<ffffffff8107c0fd>] ? wake_up_bit+0x25/0x25 Oct 13 16:06:48 Tower kernel: [<ffffffff812f0d59>] btrfs_commit_transaction.part.11+0x912/0x927 Oct 13 16:06:48 Tower kernel: [<ffffffff812f0db4>] btrfs_commit_transaction+0x46/0x4d Oct 13 16:06:48 Tower kernel: [<ffffffff81304934>] btrfs_sync_file+0x2ca/0x2f5 Oct 13 16:06:48 Tower kernel: [<ffffffff81146f6e>] vfs_fsync_range+0x87/0x99 Oct 13 16:06:48 Tower kernel: [<ffffffff81146f97>] vfs_fsync+0x17/0x19 Oct 13 16:06:48 Tower kernel: [<ffffffff81146fc5>] do_fsync+0x2c/0x45 Oct 13 16:06:48 Tower kernel: [<ffffffff811471d7>] SyS_fdatasync+0xe/0x12 Oct 13 16:06:48 Tower kernel: [<ffffffff8167f537>] entry_SYSCALL_64_fastpath+0x1a/0xa9 Oct 13 16:06:48 Tower kernel: ---[ end trace 54a3fd7b9446e8d1 ]--- Oct 13 16:06:48 Tower kernel: BTRFS: error (device loop0) in cleanup_transaction:1850: errno=-5 IO failure Oct 13 16:06:48 Tower kernel: BTRFS info (device loop0): delayed_refs has NO entry Oct 13 16:06:48 Tower emhttp: shcmd (111): umount /var/lib/docker |& logger Oct 13 16:06:48 Tower kernel: BTRFS error (device loop0): cleaner transaction attach returned -30 Oct 13 16:06:48 Tower emhttp: nothing to sync Oct 13 16:06:48 Tower emhttp: shcmd (123): set -o pipefail ; /usr/local/sbin/mount_image '/mnt/user/system/docker/docker.img' /var/lib/docker 60 |& logger Oct 13 16:06:48 Tower root: truncate: failed to truncate '/mnt/cache/system/docker/docker.img' at 64424509440 bytes: No space left on device Oct 13 16:06:48 Tower kernel: BTRFS info (device loop0): disk space caching is enabled Oct 13 16:06:48 Tower kernel: BTRFS info (device loop0): has skinny extents Oct 13 16:06:48 Tower kernel: BTRFS info (device loop0): bdev /dev/loop0 errs: wr 1, rd 0, flush 0, corrupt 0, gen 0 Oct 13 16:06:48 Tower root: Resize '/var/lib/docker' of 'max' Oct 13 16:06:48 Tower kernel: BTRFS info (device loop0): new size for /dev/loop0 is 64424509440 Oct 13 16:06:48 Tower emhttp: shcmd (124): /etc/rc.d/rc.docker start |& logger Oct 13 16:06:48 Tower root: starting docker ... Oct 13 16:06:49 Tower kernel: lo_write_bvec: 201 callbacks suppressed Oct 13 16:06:49 Tower kernel: loop: Write error at byte offset 1146310656, length 4096. Oct 13 16:06:49 Tower kernel: blk_update_request: 201 callbacks suppressed Oct 13 16:06:49 Tower kernel: blk_update_request: I/O error, dev loop0, sector 2238880 Oct 13 16:06:49 Tower kernel: btrfs_dev_stat_print_on_error: 191 callbacks suppressed Oct 13 16:06:49 Tower kernel: BTRFS error (device loop0): bdev /dev/loop0 errs: wr 22, rd 0, flush 0, corrupt 0, gen 0 Oct 13 16:06:49 Tower kernel: loop: Write error at byte offset 1441157120, length 4096. Oct 13 16:06:49 Tower kernel: blk_update_request: I/O error, dev loop0, sector 2814752 Oct 13 16:06:49 Tower kernel: BTRFS error (device loop0): bdev /dev/loop0 errs: wr 23, rd 0, flush 0, corrupt 0, gen 0 Oct 13 16:06:49 Tower kernel: loop: Write error at byte offset 1492357120, length 4096. Oct 13 16:06:49 Tower kernel: blk_update_request: I/O error, dev loop0, sector 2914752 Oct 13 16:06:49 Tower kernel: BTRFS error (device loop0): bdev /dev/loop0 errs: wr 24, rd 0, flush 0, corrupt 0, gen 0 Oct 13 16:06:49 Tower kernel: loop: Write error at byte offset 1510035456, length 4096. Oct 13 16:06:49 Tower kernel: blk_update_request: I/O error, dev loop0, sector 2949280 Oct 13 16:06:49 Tower kernel: BTRFS error (device loop0): bdev /dev/loop0 errs: wr 25, rd 0, flush 0, corrupt 0, gen 0 Oct 13 16:06:49 Tower kernel: loop: Write error at byte offset 1611321344, length 4096. Oct 13 16:06:49 Tower kernel: blk_update_request: I/O error, dev loop0, sector 3147104 Oct 13 16:06:49 Tower kernel: BTRFS error (device loop0): bdev /dev/loop0 errs: wr 26, rd 0, flush 0, corrupt 0, gen 0 Oct 13 16:06:49 Tower kernel: loop: Write error at byte offset 1618743296, length 4096. Oct 13 16:06:49 Tower kernel: blk_update_request: I/O error, dev loop0, sector 3161600 Oct 13 16:06:49 Tower kernel: BTRFS error (device loop0): bdev /dev/loop0 errs: wr 27, rd 0, flush 0, corrupt 0, gen 0 Oct 13 16:06:49 Tower kernel: loop: Write error at byte offset 1629851648, length 4096. Oct 13 16:06:49 Tower kernel: blk_update_request: I/O error, dev loop0, sector 3183296 Oct 13 16:06:49 Tower kernel: BTRFS error (device loop0): bdev /dev/loop0 errs: wr 28, rd 0, flush 0, corrupt 0, gen 0 Oct 13 16:06:49 Tower kernel: loop: Write error at byte offset 573804544, length 4096. Oct 13 16:06:49 Tower kernel: blk_update_request: I/O error, dev loop0, sector 1120704 Oct 13 16:06:49 Tower kernel: BTRFS error (device loop0): bdev /dev/loop0 errs: wr 29, rd 0, flush 0, corrupt 0, gen 0 Oct 13 16:06:50 Tower kernel: loop: Write error at byte offset 622366720, length 4096. Oct 13 16:06:50 Tower kernel: blk_update_request: I/O error, dev loop0, sector 1215552 Oct 13 16:06:50 Tower kernel: BTRFS error (device loop0): bdev /dev/loop0 errs: wr 30, rd 0, flush 0, corrupt 0, gen 0 Oct 13 16:06:50 Tower kernel: loop: Write error at byte offset 622448640, length 4096. Oct 13 16:06:50 Tower kernel: blk_update_request: I/O error, dev loop0, sector 1215712 Oct 13 16:06:50 Tower kernel: BTRFS error (device loop0): bdev /dev/loop0 errs: wr 31, rd 0, flush 0, corrupt 0, gen 0 Oct 13 16:06:52 Tower kernel: BTRFS: error (device loop0) in btrfs_commit_transaction:2227: errno=-5 IO failure (Error while writing out transaction) Oct 13 16:06:52 Tower kernel: BTRFS info (device loop0): forced readonly Oct 13 16:06:52 Tower kernel: BTRFS warning (device loop0): Skipping commit of aborted transaction. Oct 13 16:06:52 Tower kernel: ------------[ cut here ]------------ Oct 13 16:06:52 Tower kernel: WARNING: CPU: 30 PID: 21982 at fs/btrfs/transaction.c:1850 cleanup_transaction+0x8c/0x238 Oct 13 16:06:52 Tower kernel: BTRFS: Transaction aborted (error -5) Oct 13 16:06:52 Tower kernel: Modules linked in: md_mod iptable_mangle ip_tables bonding ixgbe ptp pps_core mdio x86_pkg_temp_thermal coretemp kvm_intel mpt3sas i2c_i801 ahci i2c_smbus kvm raid_class i2c_core libahci megaraid_sas scsi_transport_sas wmi ipmi_si [last unloaded: pps_core] Oct 13 16:06:52 Tower kernel: CPU: 30 PID: 21982 Comm: dockerd Tainted: G W 4.9.30-unRAID #1 Oct 13 16:06:52 Tower kernel: Hardware name: Supermicro X9DRH-7TF/7F/iTF/iF/X9DRH-7TF/7F/iTF/iF, BIOS 3.2a 06/18/2016 Oct 13 16:06:52 Tower kernel: ffffc9001b757c78 ffffffff813a4a1b ffffc9001b757cc8 ffffffff8196b262 Oct 13 16:06:52 Tower kernel: ffffc9001b757cb8 ffffffff8104d0d9 0000073a1b757d30 ffff883fccc85658 Oct 13 16:06:52 Tower kernel: ffff881fdb092800 ffff883fcce84d20 00000000fffffffb 0000000000000000 Oct 13 16:06:52 Tower kernel: Call Trace: Oct 13 16:06:52 Tower kernel: [<ffffffff813a4a1b>] dump_stack+0x61/0x7e Oct 13 16:06:52 Tower kernel: [<ffffffff8104d0d9>] __warn+0xb8/0xd3 Oct 13 16:06:52 Tower kernel: [<ffffffff8104d13a>] warn_slowpath_fmt+0x46/0x4e Oct 13 16:06:52 Tower kernel: [<ffffffff812eeff1>] cleanup_transaction+0x8c/0x238 Oct 13 16:06:52 Tower kernel: [<ffffffff8107c0fd>] ? wake_up_bit+0x25/0x25 Oct 13 16:06:52 Tower kernel: [<ffffffff812f0d59>] btrfs_commit_transaction.part.11+0x912/0x927 Oct 13 16:06:52 Tower kernel: [<ffffffff812f0db4>] btrfs_commit_transaction+0x46/0x4d Oct 13 16:06:52 Tower kernel: [<ffffffff81304934>] btrfs_sync_file+0x2ca/0x2f5 Oct 13 16:06:52 Tower kernel: [<ffffffff81146f6e>] vfs_fsync_range+0x87/0x99 Oct 13 16:06:52 Tower kernel: [<ffffffff81146f97>] vfs_fsync+0x17/0x19 Oct 13 16:06:52 Tower kernel: [<ffffffff81146fc5>] do_fsync+0x2c/0x45 Oct 13 16:06:52 Tower kernel: [<ffffffff811471d7>] SyS_fdatasync+0xe/0x12 Oct 13 16:06:52 Tower kernel: [<ffffffff8167f537>] entry_SYSCALL_64_fastpath+0x1a/0xa9 Oct 13 16:06:52 Tower kernel: ---[ end trace 54a3fd7b9446e8d2 ]--- Oct 13 16:06:52 Tower kernel: BTRFS: error (device loop0) in cleanup_transaction:1850: errno=-5 IO failure Oct 13 16:06:52 Tower kernel: BTRFS info (device loop0): delayed_refs has NO entry Oct 13 16:06:52 Tower emhttp: shcmd (126): umount /var/lib/docker |& logger Oct 13 16:06:52 Tower kernel: BTRFS error (device loop0): cleaner transaction attach returned -30 Oct 13 16:06:52 Tower emhttp: shcmd (138): set -o pipefail ; /usr/local/sbin/mount_image '/mnt/user/system/docker/docker.img' /var/lib/docker 60 |& logger Oct 13 16:06:52 Tower root: truncate: failed to truncate '/mnt/cache/system/docker/docker.img' at 64424509440 bytes: No space left on device Oct 13 16:06:52 Tower kernel: BTRFS info (device loop0): disk space caching is enabled Oct 13 16:06:52 Tower kernel: BTRFS info (device loop0): has skinny extents Oct 13 16:06:52 Tower kernel: BTRFS info (device loop0): bdev /dev/loop0 errs: wr 1, rd 0, flush 0, corrupt 0, gen 0 Oct 13 16:06:52 Tower root: Resize '/var/lib/docker' of 'max' Oct 13 16:06:52 Tower emhttp: shcmd (139): /etc/rc.d/rc.docker start |& logger Oct 13 16:06:52 Tower kernel: BTRFS info (device loop0): new size for /dev/loop0 is 64424509440 Have already deleted the docker img and keep getting the error. Logs are attached from before I tried deleting the docker img and after tower-diagnostics-20171013-1554.zip tower-diagnostics-20171013-1653.zip
  4. Hmm. Deleted files older than 14 days from recycle bin. Everything is working again. No reboot or anything else. Strange.
  5. I am unable to view syslog in the webgui. When I go to Tools-> Syslog I get this error Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 33554440 bytes) in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(383) : eval()'d code on line 73 Diagnostics attached tower-diagnostics-20170827-1919.zip
  6. Not sure what has happened, been running fine for awhile. Noticed today that my dockers weren't running properly and seen the errors in the log. At the moment I am backing up my cache to the array, so I can reformat the cache pool as has been suggested in previous topics. I have run a scrub and found no errors. Diagnostics attached. tower-diagnostics-20170827-1919.zip
  7. I am. 3000 or 5000 won't connect. I tried rutorrent port and the webui is running but can't connect to rtorrent.
  8. Got it running eventually, just retyped my login credentials. Cant get Flood running though... _='[debug] Environment variables defined as follows' exit_code_chmod=0 exit_code_chown=0 [debug] Directory listing of files in /config/openvpn as follows 2017-06-06 16:56:45,777 DEBG 'start-script' stdout output: total 16 drwxrwxrwx 1 nobody users 118 Jun 4 13:56 . drwxrwxr-x 1 nobody users 150 Jun 4 12:52 .. -rwxrwxrwx 1 nobody users 2025 Jun 6 16:56 ca.rsa.2048.crt -rwxrwxrwx 1 nobody users 20 Jun 4 13:56 credentials.conf -rwxrwxrwx 1 nobody users 869 Jun 6 16:56 crl.rsa.2048.pem -rwxrwxrwx 1 nobody users 272 Jun 6 16:56 openvpn.ovpn 2017-06-06 16:56:45,777 DEBG 'start-script' stdout output: [info] VPN config file (ovpn extension) is located at /config/openvpn/openvpn.ovpn 2017-06-06 16:56:45,778 DEBG 'start-script' stderr output: dos2unix: converting file /config/openvpn/openvpn.ovpn to Unix format... 2017-06-06 16:56:45,815 DEBG 'start-script' stdout output: [debug] Contents of ovpn file /config/openvpn/openvpn.ovpn as follows... 2017-06-06 16:56:45,816 DEBG 'start-script' stdout output: client dev tun p remote ca-toronto.privateinternetaccess.com 1198 resolv-retry infinite nobind persist-key cipher aes-128-cbc 1 tls-client remote-cert-tls server auth-user-pass credentials.conf comp-lzo verb 1 crl-verify crl.rsa.2048.pem ca ca.rsa.2048.crt disable-occ 2017-06-06 16:56:45,822 DEBG 'start-script' stdout output: [info] Default route for container is 172.17.0.1 2017-06-06 16:56:45,826 DEBG 'start-script' stdout output: [info] Adding 192.168.1.1 to /etc/resolv.conf 2017-06-06 16:56:45,831 DEBG 'start-script' stdout output: [info] Adding 8.8.8.8 to /etc/resolv.conf 2017-06-06 16:56:45,834 DEBG 'start-script' stdout output: [info] Adding 8.8.4.4 to /etc/resolv.conf 2017-06-06 16:56:45,834 DEBG 'start-script' stdout output: [debug] Show name servers defined for container 2017-06-06 16:56:45,835 DEBG 'start-script' stdout output: nameserver 192.168.1.1 nameserver 8.8.8.8 nameserver 8.8.4.4 2017-06-06 16:56:45,835 DEBG 'start-script' stdout output: [debug] Show name resolution for VPN endpoint ca-toronto.privateinternetaccess.com 2017-06-06 16:56:45,887 DEBG 'start-script' stdout output: ;; ->>HEADER<<- opcode: QUERY, rcode: NOERROR, id: 40977 ;; flags: qr rd ra ; QUERY: 1, ANSWER: 13, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;; ca-toronto.privateinternetaccess.com. IN A ;; ANSWER SECTION: ca-toronto.privateinternetaccess.com. 154 IN A 172.98.67.126 ca-toronto.privateinternetaccess.com. 154 IN A 172.98.67.3 ca-toronto.privateinternetaccess.com. 154 IN A 172.98.67.27 ca-toronto.privateinternetaccess.com. 154 IN A 172.98.67.71 ca-toronto.privateinternetaccess.com. 154 IN A 172.98.67.7 ca-toronto.privateinternetaccess.com. 154 IN A 172.98.67.6 ca-toronto.privateinternetaccess.com. 154 IN A 172.98.67.69 ca-toronto.privateinternetaccess.com. 154 IN A 172.98.67.98 ca-toronto.privateinternetaccess.com. 154 IN A 172.98.67.34 ca-toronto.privateinternetaccess.com. 154 IN A 172.98.67.29 ca-toronto.privateinternetaccess.com. 154 IN A 172.98.67.112 ca-toronto.privateinternetaccess.com. 154 IN A 172.98.67.135 ca-toronto.privateinternetaccess.com. 154 IN A 172.98.67.93 ;; AUTHORITY SECTION: ;; ADDITIONAL SECTION: ;; Query time: 49 msec ;; SERVER: 192.168.1.1 ;; WHEN: Tue Jun 6 16:56:45 2017 ;; MSG SIZE rcvd: 262 2017-06-06 16:56:45,895 DEBG 'start-script' stdout output: [info] Adding 192.168.1.0/24 as route via docker eth0 2017-06-06 16:56:45,896 DEBG 'start-script' stdout output: [info] ip route defined as follows... -------------------- 2017-06-06 16:56:45,898 DEBG 'start-script' stdout output: default via 172.17.0.1 dev eth0 172.17.0.0/16 dev eth0 proto kernel scope link src 172.17.0.10 192.168.1.0/24 via 172.17.0.1 dev eth0 2017-06-06 16:56:45,898 DEBG 'start-script' stdout output: -------------------- [debug] Modules currently loaded for kernel 2017-06-06 16:56:45,901 DEBG 'start-script' stdout output: Module Size Used by tun 19304 0 iptable_mangle 1658 2 xt_nat 1913 19 veth 4966 0 ipt_MASQUERADE 1277 20 nf_nat_masquerade_ipv4 1865 1 ipt_MASQUERADE iptable_nat 1897 1 nf_conntrack_ipv4 5874 2 nf_nat_ipv4 4199 1 iptable_nat iptable_filter 1706 5 ip_tables 9853 3 iptable_mangle,iptable_filter,iptable_nat nf_nat 11145 3 xt_nat,nf_nat_masquerade_ipv4,nf_nat_ipv4 md_mod 36700 11 bonding 92464 0 x86_pkg_temp_thermal 4669 0 coretemp 5340 0 ixgbe 177948 0 kvm_intel 160551 0 mpt3sas 168061 18 ptp 9308 1 ixgbe i2c_i801 11888 0 ahci 26326 0 i2c_smbus 3041 1 i2c_i801 raid_class 3380 1 mpt3sas kvm 289949 1 kvm_intel pps_core 5928 1 ptp i2c_core 20390 2 i2c_i801,i2c_smbus libahci 19716 1 ahci megaraid_sas 100045 0 mdio 2935 1 ixgbe scsi_transport_sas 21714 1 mpt3sas wmi 6548 0 ipmi_si 36442 0 2017-06-06 16:56:45,906 DEBG 'start-script' stdout output: [info] iptable_mangle support detected, adding fwmark for tables 2017-06-06 16:56:45,917 DEBG 'start-script' stdout output: [debug] Docker interface defined as eth0 2017-06-06 16:56:45,921 DEBG 'start-script' stdout output: [debug] Docker IP defined as 172.17.0.10 2017-06-06 16:56:45,925 DEBG 'start-script' stdout output: [debug] Docker netmask defined as 255.255.0.0 2017-06-06 16:56:45,939 DEBG 'start-script' stdout output: [info] Docker network defined as 172.17.0.0/16 2017-06-06 16:56:46,048 DEBG 'start-script' stdout output: [info] iptables defined as follows... -------------------- 2017-06-06 16:56:46,050 DEBG 'start-script' stdout output: -P INPUT DROP -P FORWARD ACCEPT -P OUTPUT DROP -A INPUT -i tun0 -j ACCEPT -A INPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT -A INPUT -i eth0 -p udp -m udp --sport 1198 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 9080 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --sport 9080 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 9443 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --sport 9443 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 3000 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --sport 3000 -j ACCEPT -A INPUT -s 192.168.1.0/24 -i eth0 -p tcp -m tcp --dport 5000 -j ACCEPT -A INPUT -p udp -m udp --sport 53 -j ACCEPT -A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT -A INPUT -i lo -j ACCEPT -A OUTPUT -o tun0 -j ACCEPT -A OUTPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT -A OUTPUT -o eth0 -p udp -m udp --dport 1198 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --dport 9080 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --sport 9080 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --dport 9443 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --sport 9443 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --dport 3000 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --sport 3000 -j ACCEPT -A OUTPUT -d 192.168.1.0/24 -o eth0 -p tcp -m tcp --sport 5000 -j ACCEPT -A OUTPUT -p udp -m udp --dport 53 -j ACCEPT -A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT -A OUTPUT -o lo -j ACCEPT 2017-06-06 16:56:46,050 DEBG 'start-script' stdout output: -------------------- 2017-06-06 16:56:46,051 DEBG 'start-script' stdout output: [debug] OpenVPN command line '/usr/bin/openvpn --cd /config/openvpn --config /config/openvpn/openvpn.ovpn --daemon --dev tun0 --remote ca-toronto.privateinternetaccess.com 1198 --proto udp --reneg-sec 0 --mute-replay-warnings --auth-nocache --keepalive 10 60 --setenv VPN_PROV pia --script-security 2 --up /root/openvpnup.sh --up-delay --up-restart --auth-user-pass credentials.conf --disable-occ --remap-usr1 SIGHUP --auth-user-pass credentials.conf --log-append /config/supervisord.log' [info] Starting OpenVPN... 2017-06-06 16:56:46,067 DEBG 'start-script' stdout output: [info] OpenVPN started 2017-06-06 16:56:46,067 DEBG 'start-script' stdout output: [debug] Waiting for valid IP address from tunnel... 2017-06-06 16:56:47,457 DEBG 'start-script' stdout output: [debug] Valid IP address from tunnel acquired '10.93.10.6' 2017-06-06 16:56:47,463 DEBG 'rtorrent-script' stdout output: [debug] Valid IP address from tunnel acquired '10.93.10.6' 2017-06-06 16:56:47,468 DEBG 'rtorrent-script' stdout output: [info] rTorrent not running [info] rTorrent listening interface IP 0.0.0.0 and VPN provider IP 10.93.10.6 different, marking for reconfigure 2017-06-06 16:56:47,570 DEBG 'rtorrent-script' stdout output: [debug] External IP address from tunnel is '173.239.230.89' 2017-06-06 16:56:58,439 DEBG 'rtorrent-script' stdout output: [debug] Incoming port for tunnel is '24059' [info] Removing any rtorrent session lock files left over from the previous run... 2017-06-06 16:56:58,441 DEBG 'rtorrent-script' stdout output: [info] Attempting to start rTorrent... 2017-06-06 16:56:58,444 DEBG 'rtorrent-script' stdout output: Script started, file is /home/nobody/typescript 2017-06-06 16:56:58,477 DEBG 'rtorrent-script' stdout output: Script done, file is /home/nobody/typescript 2017-06-06 16:56:58,482 DEBG 'rtorrent-script' stdout output: [debug] Waiting for rTorrent process to start... 2017-06-06 16:56:58,581 DEBG 'flood-script' stdout output: [info] rTorrent started, configuring Flood... 2017-06-06 16:56:58,582 DEBG 'flood-script' stdout output: [info] Flood config file already exists in /config/flood/, copying back to container... 2017-06-06 16:56:58,583 DEBG 'flood-script' stdout output: [info] Starting Flood... 2017-06-06 16:56:59,488 DEBG 'rtorrent-script' stdout output: [info] rTorrent started 2017-06-06 16:56:59,488 DEBG 'rtorrent-script' stdout output: [info] Flood enabled, disabling initialisation of ruTorrent plugins... [debug] VPN incoming port is 24059 [debug] VPN IP is 10.93.10.6 [debug] rTorrent incoming port is 24059 [debug] rTorrent IP is 10.93.10.6 2017-06-06 16:57:29,490 DEBG 'rtorrent-script' stdout output: [debug] Waiting for valid IP address from tunnel... 2017-06-06 16:57:29,638 DEBG 'rtorrent-script' stdout output: [debug] Valid IP address from tunnel acquired '10.93.10.6' 2017-06-06 16:57:29,649 DEBG 'rtorrent-script' stdout output: [debug] External IP address from tunnel is '173.239.230.89' 2017-06-06 16:57:29,650 DEBG 'rtorrent-script' stdout output: [debug] Incoming port for tunnel is '24059' 2017-06-06 16:57:29,832 DEBG 'rtorrent-script' stdout output: [debug] VPN incoming port is 24059 [debug] VPN IP is 10.93.10.6 [debug] rTorrent incoming port is 24059 [debug] rTorrent IP is 10.93.10.6 2017-06-06 16:57:59,834 DEBG 'rtorrent-script' stdout output: [debug] Waiting for valid IP address from tunnel... 2017-06-06 16:57:59,977 DEBG 'rtorrent-script' stdout output: [debug] Valid IP address from tunnel acquired '10.93.10.6' 2017-06-06 16:57:59,983 DEBG 'rtorrent-script' stdout output: [debug] External IP address from tunnel is '173.239.230.89' 2017-06-06 16:57:59,984 DEBG 'rtorrent-script' stdout output: [debug] Incoming port for tunnel is '24059' 2017-06-06 16:58:00,116 DEBG 'rtorrent-script' stdout output: [debug] VPN incoming port is 24059 [debug] VPN IP is 10.93.10.6 [debug] rTorrent incoming port is 24059 [debug] rTorrent IP is 10.93.10.6 2017-06-06 16:58:30,118 DEBG 'rtorrent-script' stdout output: [debug] Waiting for valid IP address from tunnel... 2017-06-06 16:58:30,249 DEBG 'rtorrent-script' stdout output: [debug] Valid IP address from tunnel acquired '10.93.10.6' 2017-06-06 16:58:30,254 DEBG 'rtorrent-script' stdout output: [debug] External IP address from tunnel is '173.239.230.89' 2017-06-06 16:58:30,255 DEBG 'rtorrent-script' stdout output: [debug] Incoming port for tunnel is '24059' 2017-06-06 16:58:30,478 DEBG 'rtorrent-script' stdout output: [debug] VPN incoming port is 24059 [debug] VPN IP is 10.93.10.6 [debug] rTorrent incoming port is 24059 [debug] rTorrent IP is 10.93.10.6 2017-06-06 16:59:00,479 DEBG 'rtorrent-script' stdout output: [debug] Waiting for valid IP address from tunnel... 2017-06-06 16:59:00,612 DEBG 'rtorrent-script' stdout output: [debug] Valid IP address from tunnel acquired '10.93.10.6' 2017-06-06 16:59:00,620 DEBG 'rtorrent-script' stdout output: [debug] External IP address from tunnel is '173.239.230.89' 2017-06-06 16:59:00,622 DEBG 'rtorrent-script' stdout output: [debug] Incoming port for tunnel is '24059' 2017-06-06 16:59:00,911 DEBG 'rtorrent-script' stdout output: [debug] VPN incoming port is 24059 [debug] VPN IP is 10.93.10.6 [debug] rTorrent incoming port is 24059 2017-06-06 16:59:00,911 DEBG 'rtorrent-script' stdout output: [debug] rTorrent IP is 10.93.10.6 2017-06-06 16:59:30,913 DEBG 'rtorrent-script' stdout output: [debug] Waiting for valid IP address from tunnel... 2017-06-06 16:59:31,051 DEBG 'rtorrent-script' stdout output: [debug] Valid IP address from tunnel acquired '10.93.10.6' 2017-06-06 16:59:31,060 DEBG 'rtorrent-script' stdout output: [debug] External IP address from tunnel is '173.239.230.89' 2017-06-06 16:59:31,062 DEBG 'rtorrent-script' stdout output: [debug] Incoming port for tunnel is '24059' 2017-06-06 16:59:31,302 DEBG 'rtorrent-script' stdout output: [debug] VPN incoming port is 24059 [debug] VPN IP is 10.93.10.6 [debug] rTorrent incoming port is 24059 [debug] rTorrent IP is 10.93.10.6
  9. Trying to get this running but unable to. Logs Created by... ___. .__ .__ \_ |__ |__| ____ | |__ ____ ___ ___ | __ \| |/ \| | \_/ __ \\ \/ / | \_\ \ | | \ Y \ ___/ > < |___ /__|___| /___| /\___ >__/\_ \ \/ \/ \/ \/ \/ https://hub.docker.com/u/binhex/ 2017-06-03 17:59:43.981000 [info] Host is running unRAID 2017-06-03 17:59:44.021144 [info] System information Linux dd09683491e2 4.9.30-unRAID #1 SMP PREEMPT Fri May 26 13:56:36 PDT 2017 x86_64 GNU/Linux 2017-06-03 17:59:44.068247 [info] PUID defined as '99' 2017-06-03 17:59:44.115894 [info] PGID defined as '100' 2017-06-03 17:59:44.166783 [info] UMASK defined as '000' 2017-06-03 17:59:44.213286 [info] Setting permissions recursively on volume mappings... 2017-06-03 17:59:44.282529 [info] VPN_ENABLED defined as 'yes' 2017-06-03 17:59:44.350112 [info] VPN_PROV defined as 'pia' 2017-06-03 17:59:44.396129 [info] VPN_REMOTE defined as 'ca.toronto.privateinternetaccess.com' 2017-06-03 17:59:44.440473 [info] VPN_PORT defined as '1198' 2017-06-03 17:59:44.486119 [info] VPN_PROTOCOL defined as 'udp' 2017-06-03 17:59:44.539380 [info] LAN_NETWORK defined as '192.168.1.0/24' 2017-06-03 17:59:44.587021 [info] NAME_SERVERS defined as '8.8.8.8,8.8.4.4' 2017-06-03 17:59:44.632192 [info] VPN_USER defined as 'xx' 2017-06-03 17:59:44.695034 [info] VPN_PASS defined as 'xx' 2017-06-03 17:59:44.757233 [info] VPN_INCOMING_PORT defined as '49160' 2017-06-03 17:59:44.803846 [info] VPN_DEVICE_TYPE defined as 'tun' 2017-06-03 17:59:44.850298 [info] VPN_OPTIONS not defined (via -e VPN_OPTIONS) 2017-06-03 17:59:44.893420 [info] STRONG_CERTS defined as 'no' 2017-06-03 17:59:44.954715 [info] ENABLE_PRIVOXY defined as 'no' 2017-06-03 17:59:45.000748 [info] ENABLE_FLOOD defined as 'no' chsh: Shell not changed. Changing shell for nobody. 2017-06-03 17:59:45,753 CRIT Set uid to user 0 2017-06-03 17:59:45,753 INFO Included extra file "/etc/supervisor/conf.d/rtorrent.conf" during parsing 2017-06-03 17:59:45,757 INFO supervisord started with pid 7 2017-06-03 17:59:46,761 INFO spawned: 'flood-script' with pid 121 2017-06-03 17:59:46,762 INFO spawned: 'start-script' with pid 122 2017-06-03 17:59:46,764 INFO spawned: 'rtorrent-script' with pid 123 2017-06-03 17:59:46,765 INFO spawned: 'rutorrent-script' with pid 124 2017-06-03 17:59:46,766 INFO spawned: 'privoxy-script' with pid 125 2017-06-03 17:59:46,778 DEBG 'flood-script' stdout output: [info] Flood not enabled, skipping starting Flood Web UI 2017-06-03 17:59:46,778 INFO success: flood-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2017-06-03 17:59:46,778 INFO success: start-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2017-06-03 17:59:46,778 INFO success: rtorrent-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2017-06-03 17:59:46,778 INFO success: rutorrent-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2017-06-03 17:59:46,778 INFO success: privoxy-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2017-06-03 17:59:46,778 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 47164896974752 for <Subprocess at 47164896973312 with name flood-script in state RUNNING> (stdout)> 2017-06-03 17:59:46,778 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 47164896975328 for <Subprocess at 47164896973312 with name flood-script in state RUNNING> (stderr)> 2017-06-03 17:59:46,779 INFO exited: flood-script (exit status 0; expected) 2017-06-03 17:59:46,779 DEBG received SIGCLD indicating a child quit 2017-06-03 17:59:46,779 DEBG 'start-script' stdout output: [info] VPN is enabled, beginning configuration of VPN 2017-06-03 17:59:46,779 DEBG 'rtorrent-script' stdout output: [info] rTorrent config file doesnt exist, copying default to /config/rtorrent/config/... 2017-06-03 17:59:46,780 DEBG 'privoxy-script' stdout output: [info] Privoxy set to disabled 2017-06-03 17:59:46,781 DEBG fd 27 closed, stopped monitoring <POutputDispatcher at 47164898378024 for <Subprocess at 47164896974968 with name privoxy-script in state RUNNING> (stdout)> 2017-06-03 17:59:46,781 DEBG fd 31 closed, stopped monitoring <POutputDispatcher at 47164898379392 for <Subprocess at 47164896974968 with name privoxy-script in state RUNNING> (stderr)> 2017-06-03 17:59:46,781 INFO exited: privoxy-script (exit status 0; expected) 2017-06-03 17:59:46,781 DEBG received SIGCLD indicating a child quit 2017-06-03 17:59:46,785 DEBG 'rtorrent-script' stdout output: [info] VPN is enabled, checking VPN tunnel local ip is valid 2017-06-03 17:59:46,789 DEBG 'start-script' stdout output: [info] VPN default certs defined, copying to /config/openvpn/... 2017-06-03 17:59:46,793 DEBG 'start-script' stdout output: [info] VPN config file (ovpn extension) is located at /config/openvpn/openvpn.ovpn 2017-06-03 17:59:46,795 DEBG 'start-script' stderr output: dos2unix: converting file /config/openvpn/openvpn.ovpn to Unix format... 2017-06-03 17:59:46,850 DEBG 'start-script' stdout output: [info] Default route for container is 172.17.0.1 2017-06-03 17:59:46,855 DEBG 'start-script' stdout output: [info] Adding 8.8.8.8 to /etc/resolv.conf 2017-06-03 17:59:46,860 DEBG 'start-script' stdout output: [info] Adding 8.8.4.4 to /etc/resolv.conf 2017-06-03 17:59:46,868 DEBG 'start-script' stdout output: [info] Adding 192.168.1.0/24 as route via docker eth0 2017-06-03 17:59:46,869 DEBG 'start-script' stdout output: [info] ip route defined as follows... -------------------- 2017-06-03 17:59:46,870 DEBG 'start-script' stdout output: default via 172.17.0.1 dev eth0 172.17.0.0/16 dev eth0 proto kernel scope link src 172.17.0.12 192.168.1.0/24 via 172.17.0.1 dev eth0 2017-06-03 17:59:46,870 DEBG 'start-script' stdout output: -------------------- 2017-06-03 17:59:46,874 DEBG 'start-script' stdout output: [info] iptable_mangle support detected, adding fwmark for tables 2017-06-03 17:59:46,902 DEBG 'start-script' stdout output: [info] Docker network defined as 172.17.0.0/16 2017-06-03 17:59:46,980 DEBG 'start-script' stdout output: [info] iptables defined as follows... -------------------- 2017-06-03 17:59:46,983 DEBG 'start-script' stdout output: -P INPUT DROP -P FORWARD ACCEPT -P OUTPUT DROP -A INPUT -i tun0 -j ACCEPT -A INPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT -A INPUT -i eth0 -p udp -m udp --sport 1198 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 9080 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --sport 9080 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 9443 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --sport 9443 -j ACCEPT -A INPUT -s 192.168.1.0/24 -i eth0 -p tcp -m tcp --dport 5000 -j ACCEPT -A INPUT -p udp -m udp --sport 53 -j ACCEPT -A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT -A INPUT -i lo -j ACCEPT -A OUTPUT -o tun0 -j ACCEPT -A OUTPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT -A OUTPUT -o eth0 -p udp -m udp --dport 1198 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --dport 9080 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --sport 9080 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --dport 9443 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --sport 9443 -j ACCEPT -A OUTPUT -d 192.168.1.0/24 -o eth0 -p tcp -m tcp --sport 5000 -j ACCEPT -A OUTPUT -p udp -m udp --dport 53 -j ACCEPT -A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT -A OUTPUT -o lo -j ACCEPT 2017-06-03 17:59:46,983 DEBG 'start-script' stdout output: -------------------- 2017-06-03 17:59:46,983 DEBG 'start-script' stdout output: [info] Starting OpenVPN... 2017-06-03 17:59:46,990 DEBG 'start-script' stdout output: [info] OpenVPN started
  10. Getting a 403 Forbidden when I try to access rtorrent in OMV. Error in log 2017/02/07 02:05:34 [error] 762#762: *18 open() "/config/nginx/security/auth" failed (2: No such file or directory), client: 192.168.1.114, server: localhost, request: "GET /favicon.ico HTTP/1.1", host: "filebox:9080", referrer: "http://filebox:9080/" also a list of the config dir root@filebox:/media/3c1faf4b-5ae9-4fec-a79c-3629e8f06843/storage/appdata/rtorrent# ls -la total 32 drwxrwxr-x 6 root root 118 Feb 7 01:59 . drwxr-xr-x 3 root root 21 Feb 7 01:28 .. -rw-r--r-- 1 root root 6973 Feb 7 02:17 access.log drwxr-xr-x 5 root root 46 Feb 7 01:59 nginx drwxrwxr-x 2 root root 93 Feb 7 01:59 openvpn -rw-r--r-- 1 root root 162 Feb 7 01:28 perms.txt drwxrwxrwx 4 root root 33 Feb 7 01:59 rtorrent drwxr-xr-x 5 root root 43 Feb 7 01:59 rutorrent -rwxrwxr-x 1 root root 17718 Feb 7 02:17 supervisord.log Dunno why I cant access rutorrent
  11. Server back online, not seeing the smbus error but did see this Jan 12 17:41:51 Tower kernel: TCP: request_sock_TCP: Possible SYN flooding on port 30949. Sending cookies. Check SNMP counters.
  12. So memtest is good, so far since updating the bios, no smbus errors.
  13. updated to latest bios, running memtest now
  14. Seeing this come up very often in my logs Dec 29 16:46:56 Tower kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Also seen a segfault Jan 2 11:02:21 Tower kernel: CrashUploader[16232]: segfault at eafa78 ip 00002af6f9e53eb3 sp 00002af6fa575d48 error 4 in libc-2.24.so[2af6f9dd0000+195000] Attached is my diagnostics file, any help appreciated as I have no idea where to look/start. tower-diagnostics-20170107-2311.zip
  15. Have installed this and I am unable to get any trackers working. Seen this in the log [cont-init.d] 10-adduser: exited 0. [cont-init.d] 30-config: executing... [cont-init.d] 30-config: exited 0. [cont-init.d] done. [services.d] starting services [services.d] done. time="2016-12-03T12:18:18-05:00" level=info msg="Cardigann v1.9.4" time="2016-12-03T12:18:18-05:00" level=info msg="Reading config from /config/config.json" time="2016-12-03T12:18:18-05:00" level=info msg="Found 4 indexers enabled in configuration" time="2016-12-03T12:18:18-05:00" level=info msg="Listening on 0.0.0.0:5060" ? Testing indexer demonoid at http://www.dnoid.me/ Testing required config is available [32mSUCCESS ?[0m [37min 437.722µs[0m Testing login with valid credentials [31mFAILURE ?[0m [37min 20.002423302s[0m ? Indexer demonoid [31mFAILED[0m with [31mNo working urls found[0m time="2016-12-03T12:21:01-05:00" level=warning msg="URL check failed" error="Get http://www.dnoid.me/: dial tcp: lookup www.dnoid.me on 192.168.1.1:53: read udp 192.168.1.152:43470->192.168.1.1:53: i/o timeout" site=demonoid time="2016-12-03T12:21:01-05:00" level=error msg="Test failed" error="No working urls found" time="2016-12-03T12:21:16-05:00" level=warning msg="URL check failed" error="Get https://eztv.ag/: dial tcp: lookup eztv.ag on 192.168.1.1:53: read udp 192.168.1.152:36896->192.168.1.1:53: i/o timeout" site=eztv time="2016-12-03T12:23:23-05:00" level=warning msg="URL check failed" error="Get https://thepiratebay.org/: dial tcp: lookup thepiratebay.org on 192.168.1.1:53: read udp 192.168.1.152:33165->192.168.1.1:53: i/o timeout" site=thepiratebay time="2016-12-03T12:23:43-05:00" level=warning msg="URL check failed" error="Get https://thepiratesbay.pw/: dial tcp: lookup thepiratesbay.pw on 192.168.1.1:53: read udp 192.168.1.152:60513->192.168.1.1:53: i/o timeout" site=thepiratebay time="2016-12-03T12:23:43-05:00" level=warning msg="URL check failed" error="Get https://thepiratesbay.pw/: dial tcp: lookup thepiratesbay.pw on 192.168.1.1:53: read udp 192.168.1.152:60513->192.168.1.1:53: i/o timeout" site=thepiratebay time="2016-12-03T12:24:03-05:00" level=warning msg="URL check failed" error="Get https://tproxy.pro/: dial tcp: lookup tproxy.pro on 192.168.1.1:53: read udp 192.168.1.152:53668->192.168.1.1:53: i/o timeout" site=thepiratebay
  16. I did, he recomended I nuke the img file and rebuild. Its not just his containers with the error though.
  17. Was having an issue with updating a docker and was getting this error Error: Tag latest not found in repository docker.io/binhex/arch-plexpass So I nuked the docker.img file and am now rebuilding. The thing is I'm getting this error with other containers as well. I've attached my diagnostics. When I upgraded from 6.1 to 6.2 I had to delete and rebuild docker.img as well. Any ideas? tower-diagnostics-20161106-1047.zip
  18. Pulling image: binhex/arch-plexpass:latest TOTAL DATA PULLED: 0 B Error: Tag latest not found in repository docker.io/binhex/arch-plexpass Getting this error trying to update. Anyone encounter this?
  19. Use "unassigned devices" plugin Sent from my SM-G900W8 using Tapatalk
  20. seems there is a pull request for what you need. Hopefully binhex can find some time and merge it.
  21. couch is moving files to media folder as root, anyway to change it to users/nobody?
  22. I've tried removing and re installing. But it won't start now. Get the following error. root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name="kodi-headless" --net="bridge" -e PUID="99" -e PGID="100" -e TZ="America/New_York" -p 6666:8080/tcp -p 9777:9777/udp -v "/mnt/cache/appdata/kodiheadless/":"/config/.kodi":rw linuxserver/kodi-headless fe6f90fea75773a7bf6843159dc7b935b033e5519aea22f4be68c586757cc498 Error response from daemon: Cannot start container fe6f90fea75773a7bf6843159dc7b935b033e5519aea22f4be68c586757cc498: iptables failed: iptables --wait -t filter -A DOCKER ! -i docker0 -o docker0 -p tcp -d 172.17.0.39 --dport 8080 -j ACCEPT: iptables: No chain/target/match by that name. (exit status 1) The command failed.
  23. Hmm, just installed kodi-headless. Copied over the advancedsettings.xml and sources.xml. Now the docker app silently exits 5 mins in. log User uid: 99 User gid: 100 ----------------------------------- We are now refreshing packages from apt repositorys, this *may* take a while Update: OK Collecting cffi==1.5.0 Downloading cffi-1.5.0.tar.gz (385kB) Requirement already satisfied (use --upgrade to upgrade): pycparser in /usr/local/lib/python2.7/dist-packages (from cffi==1.5.0) Building wheels for collected packages: cffi Running setup.py bdist_wheel for cffi Stored in directory: /root/.cache/pip/wheels/ac/44/4b/301cfb6ad4531e8271f7ca364097c5276b65c975942d132151 Successfully built cffi Installing collected packages: cffi Found existing installation: cffi 1.4.2 Uninstalling cffi-1.4.2: Successfully uninstalled cffi-1.4.2 Successfully installed cffi-1.5.0 Collecting colorama==0.3.6 Downloading colorama-0.3.6-py2.py3-none-any.whl Installing collected packages: colorama Found existing installation: colorama 0.3.5 Uninstalling colorama-0.3.5: Successfully uninstalled colorama-0.3.5 Successfully installed colorama-0.3.6 Collecting cryptography==1.2.2 Downloading cryptography-1.2.2.tar.gz (372kB) Requirement already satisfied (use --upgrade to upgrade): idna>=2.0 in /usr/local/lib/python2.7/dist-packages (from cryptography==1.2.2) Requirement already satisfied (use --upgrade to upgrade): pyasn1>=0.1.8 in /usr/local/lib/python2.7/dist-packages (from cryptography==1.2.2) Requirement already satisfied (use --upgrade to upgrade): six>=1.4.1 in /usr/local/lib/python2.7/dist-packages (from cryptography==1.2.2) Requirement already satisfied (use --upgrade to upgrade): setuptools>=1.0 in /usr/local/lib/python2.7/dist-packages (from cryptography==1.2.2) Requirement already satisfied (use --upgrade to upgrade): enum34 in /usr/local/lib/python2.7/dist-packages (from cryptography==1.2.2) Requirement already satisfied (use --upgrade to upgrade): ipaddress in /usr/local/lib/python2.7/dist-packages (from cryptography==1.2.2) Requirement already satisfied (use --upgrade to upgrade): cffi>=1.4.1 in /usr/local/lib/python2.7/dist-packages (from cryptography==1.2.2) Requirement already satisfied (use --upgrade to upgrade): pycparser in /usr/local/lib/python2.7/dist-packages (from cffi>=1.4.1->cryptography==1.2.2) Building wheels for collected packages: cryptography Running setup.py bdist_wheel for cryptography Stored in directory: /root/.cache/pip/wheels/1b/a2/47/a2a68fd1435bf7495b74fa545f008365241636e8dff8ff3454 Successfully built cryptography Installing collected packages: cryptography Found existing installation: cryptography 1.1.2 Uninstalling cryptography-1.1.2: Successfully uninstalled cryptography-1.1.2 Successfully installed cryptography-1.2.2 Collecting virtualenv==14.0.4 Downloading virtualenv-14.0.4-py2.py3-none-any.whl (1.8MB) Installing collected packages: virtualenv Found existing installation: virtualenv 13.1.2 Uninstalling virtualenv-13.1.2: Successfully uninstalled virtualenv-13.1.2 Successfully installed virtualenv-14.0.4 No Update Required Jan 31 20:32:34 3fc100b384e8 syslog-ng[180]: syslog-ng starting up; version='3.5.3' ----------------------------------- _ _ _ | |___| (_) ___ | / __| | |/ _ \ | \__ \ | | (_) | |_|___/ |_|\___/ |_| Brought to you by linuxserver.io ----------------------------------- GID/UID ----------------------------------- User uid: 99 User gid: 100 ----------------------------------- We are now refreshing packages from apt repositorys, this *may* take a while Update: OK Everything up-to-date No Update Required Jan 31 20:42:09 3fc100b384e8 syslog-ng[77]: syslog-ng starting up; version='3.5.3' ----------------------------------- _ _ _ | |___| (_) ___ | / __| | |/ _ \ | \__ \ | | (_) | |_|___/ |_|\___/ |_| Brought to you by linuxserver.io ----------------------------------- GID/UID ----------------------------------- User uid: 99 User gid: 100 ----------------------------------- We are now refreshing packages from apt repositorys, this *may* take a while Update: OK ----------------------------------- _ _ _ | |___| (_) ___ | / __| | |/ _ \ | \__ \ | | (_) | |_|___/ |_|\___/ |_| Brought to you by linuxserver.io ----------------------------------- GID/UID ----------------------------------- User uid: 99 User gid: 100 ----------------------------------- We are now refreshing packages from apt repositorys, this *may* take a while Update: OK ----------------------------------- _ _ _ | |___| (_) ___ | / __| | |/ _ \ | \__ \ | | (_) | |_|___/ |_|\___/ |_| Brought to you by linuxserver.io ----------------------------------- GID/UID ----------------------------------- User uid: 99 User gid: 100 ----------------------------------- We are now refreshing packages from apt repositorys, this *may* take a while Update: OK ----------------------------------- _ _ _ | |___| (_) ___ | / __| | |/ _ \ | \__ \ | | (_) | |_|___/ |_|\___/ |_| Brought to you by linuxserver.io ----------------------------------- GID/UID ----------------------------------- User uid: 99 User gid: 100 ----------------------------------- We are now refreshing packages from apt repositorys, this *may* take a whileUpdate: OK
  24. Any idea if this will be added?? I've noticed the nginx docker with it, but I'm more comfortable with apache myself.
  25. My error, thought you were talking about delugevpn. I just run reg sab, never saw the need to have my news run through a vpn as I'm only d/lding.