kyis

Everything is working as intended on my end, but my setup probably wasn't accounted for: I have two WAN links/ public IPs, a fast link with a dynamic IP I'm unable to forward ports through (say 1.1.1.1), another slightly slower with a static IP I'm using as failover for the first link and to forward ports through (say 2.2.2.2), the plugin probably tested the default link to get my external IP and associate it (1.1.1.1) to my www.hash.unraid.com subdomain, except that's not the one I'm forwarding from. Is there any way I can manually override the external IP to set my inbound link (2.2.2.2 in my example) or more complex but probably more flexible, a list of IPs assigned in order to www./www1./www2. etc?

To update on my situation since this is getting attention, I had been using ssh to track my logs while trying to figure out what was going on and popup logs began working again one day, I don't have an explanation for it unfortunately.

Perfectly happy with the work LSIO does, the only feature I need from 5.10 is dark mode so I don't have to switch windows to night mode when I check on my network. 😉 Making a docker for yourself is extremely easy, making a flexible one that works for the masses is worth money IMO. (https://www.linuxserver.io/donate)

Hi, My problem : The top right log button loads an "about:blank" popup. Tested on Chrome, Edge, IE Output of cat /var/log/syslog is as expected. Nothing changes by disabling antivirus and adblocker. Running the following line outputs properly html formatted tail of syslog: /usr/local/emhttp/plugins/dynamix/scripts/tail_log syslog Edit: When clicking the button I get this in syslog: Aug 10 19:09:31 Tower emhttpd: req (11): csrf_token=***************&title=System+Log&cmd=%2FwebGui%2Fscripts%2Ftail_log&arg1=syslog Aug 10 19:09:31 Tower emhttpd: cmd: /usr/local/emhttp/plugins/dynamix/scripts/tail_log syslog Opening other popups such as docker logs doesn't log anything, it seemed odd and worth mentioning. The "(11)" increments at each request. Edit2: The issue occurs with VM logs as well. Any help would be greatly appreciated.

@dmacias worked like a charm, everything is cool and quiet. Thanks a lot!

@dmacias thanks for taking the time, I'm running 2016.10.24

Same issue as xoddoza on a C2750D4I, I cleared my settings and reinstalled the plugin. Previously working board.json (its presence/absence in the ipmi folder doesn't seem to change anything): { "ASRockRack": { "raw": "00 3a 01", "auto": "00 00 00 00 00 00 00 00", "full": "64 64 64 64 64 64 64 64", "fans": { "CPU_FAN1": "00", "FAN_POS2": "00", "REAR_FAN1": "00", "FAN_POS4": "00", "FRNT_FAN1": "00", "FRNT_FAN2": "00", "FAN_POS7": "00", "FAN_POS8": "00" } } } Edit: I found that the fan.cfg file doesn't have anything for the board key, from the code it looks like that would make the configuration fail but I've run out of time to look into where that file is generated and why everything is grayed in the ui. I'll keep looking later. FANCONTROL="disable" FANPOLL="3" FANIP="" IPMIBOARD=""

@johnnie.black thanks, I know what I'm doing after work tomorrow. It'll be hell to reroute all the cables cleanly but I'll give the skirt a try, my idea was a bit more destructive, cutting 120mm holes in the side panel and putting 2 fans to pull air out so airflow would be forced through the HDD cage. Edit: Adding the skirt didn't change much, I assume the fans didn't have enough static pressure to begin with. Installing the PPC fans made a huge difference, they keep everything at 11°C above ambient when running at 30% with a huge margin if things start to heat up.

@johnnie.black Yup that's why I'm fretting, I don't want to wait for winter to do parity checks. ^^ I've got a DS380 case with 8 drives, that's a lot of drives in a tiny space and not a lot of cooling solutions. The new fans I ordered should ideally triple the airflow but even then I'm not sure it'll be enough. I have no way to control ambient temp, goes from 16°C in winter to 26°C in summer. If the new fans don't cut it, I'll be looking if I can contribute some code to do what I need and if it's beyond me I'll be cutting into the case to pull air through the HDD cage.

@graywolf yup, 6TB drives take 14-16 hours to scan on my system, starting at 36°C, 6 hours in the scan I'm nearing 60°C on all 8 drives and if the mover is active all bets are off in terms of duration... In the meantime I ordered 3 industrial PPC fans, they do magic in my other rigs, I hope they'll improve cooling overall but I don't think they'll change anything for parity scans, it's too much heat too fast.

+1 for this feature, I would love if scan throttling also responded to disks temp as well, my drives are running way too hot for comfort during scans on warmish days and I don't have room in the case for more fans (currently 3x120mm running 100% all the time), I'm at a point where I'm considering cutting into the side and front panels to add fans... My thinking is that the scan would pause when a disk goes above warning temp and resume when it's below minus a few degrees or a set value maybe. If the scan could pause for the mover it would avoid endless thrashing also.

@wgstarks I would wait to be able to update unRAID as a whole. Updating dependencies here and there is asking for trouble. ^^

@wgstarks ok here is my version (under unRAID 6.3.2) and truncated columns list which includes SERIAL, I think this column is a requirement you may be stuck until you can update unRAID if it isn't supported by your version. If it has just been renamed maybe... root@BlackHole:~# lsblk -V lsblk from util-linux 2.28.2 root@BlackHole:~# lsblk -h ... Available columns (for --output): NAME device name KNAME internal kernel device name MAJ:MIN major:minor device number FSTYPE filesystem type MOUNTPOINT where the device is mounted LABEL filesystem LABEL UUID filesystem UUID PARTTYPE partition type UUID PARTLABEL partition LABEL PARTUUID partition UUID PARTFLAGS partition flags RA read-ahead of the device RO read-only device RM removable device HOTPLUG removable or hotplug device (usb, pcmcia, ...) MODEL device identifier SERIAL disk serial number SIZE size of the device STATE state of the device OWNER user name GROUP group name MODE device node permissions ALIGNMENT alignment offset MIN-IO minimum I/O size OPT-IO optimal I/O size PHY-SEC physical sector size LOG-SEC logical sector size ROTA rotational device SCHED I/O scheduler name RQ-SIZE request queue size TYPE device type DISC-ALN discard alignment offset DISC-GRAN discard granularity DISC-MAX discard max bytes DISC-ZERO discard zeroes data WSAME write same max bytes WWN unique storage identifier RAND adds randomness PKNAME internal parent kernel device name HCTL Host:Channel:Target:Lun for SCSI TRAN device transport type SUBSYSTEMS de-duplicated chain of subsystems REV device revision VENDOR device vendor ...

@wgstarks ok, typical output should be : NAME="sdf" TYPE="disk" LABEL="" SIZE="4000787030016" MOUNTPOINT="" FSTYPE="" SERIAL="WD-WCC4E1YTHK4R" NAME="sdf1" TYPE="part" LABEL="" SIZE="4000786980352" MOUNTPOINT="" FSTYPE="xfs" SERIAL="" NAME="sdd" TYPE="disk" LABEL="" SIZE="250059350016" MOUNTPOINT="" FSTYPE="" SERIAL="S2R6NX0HB36987T" NAME="sdd1" TYPE="part" LABEL="" SIZE="250059317248" MOUNTPOINT="" FSTYPE="btrfs" SERIAL="" NAME="md6" TYPE="md" LABEL="" SIZE="6001175072768" MOUNTPOINT="/mnt/disk6" FSTYPE="" SERIAL="" NAME="sdb" TYPE="disk" LABEL="" SIZE="6001175126016" MOUNTPOINT="" FSTYPE="" SERIAL="WD-WX11D76D3L8C" NAME="sdb1" TYPE="part" LABEL="" SIZE="6001175076352" MOUNTPOINT="" FSTYPE="xfs" SERIAL="" NAME="md4" TYPE="md" LABEL="" SIZE="4000786976768" MOUNTPOINT="/mnt/disk4" FSTYPE="" SERIAL="" NAME="sdk" TYPE="disk" LABEL="" SIZE="6001175126016" MOUNTPOINT="" FSTYPE="" SERIAL="WD-WX21DC5J246D" ... And lines where type is "disk" are used by php to populate the array your error says is null. Try running the command again but remove the "2>/dev/null" maybe it'll give you some useful error.

@wgstarks History of plg files (way better ^^) following what trurl said : https://github.com/gfjardim/unRAID-plugins/commits/master/plugins/preclear.disk.plg For the hell of it what does this command return on your system ?: lsblk -nbP -o name,type,label,size,mountpoint,fstype,serial 2>/dev/null @ mentions DO work! That's great, no more endless quoting. ^^

Preclear plugin archive on github : https://github.com/gfjardim/unRAID-plugins/tree/master/archive

Successfully cleared my drive with the modification.

That was the next step, I'm rerunning a clear before that to see if it was a fluck or if it consistently fails on just one write. Edit: Exact same result, 2MB not written or failed, can't tell. I won't upload the log, it's identical to the previous one. I wonder if it might be an "off by 1" kind of error somewhere in the math, 2MB is the value of the sb parameter of dd, it might be used somewhere else. Edit: Memtest done no errors... I'm stumped Edit: Finally caught what I was looking for, I edited the script so the -t option would run over 1TB and I monitored dd_output, I got this amongst the normal output: dd: warning: partial read (1126400 bytes); suggest iflag=fullblock Added the flag inside the function write_disk(), clearing and praying (already past the point where the message was showing up).

Hi, can you please check this out : It should have been posted here to begin with I guess. ^^ Edit: Is there any way to increase verbosity on dd ? Looking at the script real quick it looks like all errors should be logged already but it's quite a large script/voodoo magic spell, I wouldn't want to edit anything half-assedly and screw with my data.

Same, 2MB return failure on zeroing early on, doesn't show up in the log though, it showed an error real quick and some recommendation in it, couldn't tell what it was. Log attached. BLACKHOLE-preclear.disk-20170222-0516.zip

I started dabbling with docker but I still have no clue what I'm doing. I successfully installed Zoneminder 1.29 silently in a container using that http://pastebin.com/wemBJ5XD Maybe it can help, in the meantime I'm going to wrap my head around how docker works and ditch the windows toolbox to build, it's asking for pain. Edit: forgot to mention it was based on the same base image as you but at 0.9.18

Glad I could help, and I learned how plugin installation works on the way.

You're fast ^^ Fixed by opening flash/bzroot using 7zip Extracted /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php Connected via sftp to my machine (as root) Copied php file to /usr/local/emhttp/plugins/dynamix/include/ Checked that permissions were 644 Refreshed WebUI Works Since I know I can fix it, I tried reinstalling Local Master in hopes of it breaking again but I failed, it installed fine ^^.

Exact same issue as nacat78, lost access to the webUI with the same error, everything else is still fine. Looking for a way to uninstall plugins from terminal...

Could this be used to generate duplicates reports like same files in any folder, same folders (identical hash set), etc ? I figure since we're spending time computing hashes, might as well make use of them.