karateo

It's only an app to open. I have a shortcut in Android 1st desktop so it's just one more click to connect and one more click to disconnect. The problem is the initial configuration but I am past that! Then you only copy the certificates and the wife.ovpn file to load everything into the app. Thanks for clarifying the security bit.

It's not linuxserver/nextcloud specific question but I thought here is the best topic as everyone using nextlcloud is reading this topic. Instead of reverse proxy + ssl certificate I was thinking, why don't just use a VPN connection to home router or Unraid server and then connect to lan ip? Isn't it much more secure? Also, if somebody uses another method to connect remotely to his nextcloud I would be interested.

the last two months after the check I get a few modified files last month was BLAKE2 hash key mismatch (updated), /mnt/disk1/Photos/2015 xxxxxxx/DSC_5258.JPG was modified BLAKE2 hash key mismatch (updated), /mnt/disk1/Photos/2015 xxxxxxx/xxxxxxx/DSC_5422.JPG was modified BLAKE2 hash key mismatch (updated), /mnt/disk1/Photos/2015 xxxxxxx/xxxxxxx/DSC_5423.JPG was modified BLAKE2 hash key mismatch (updated), /mnt/disk1/Photos/2016 - 2017 xxxxxxx/-=Videos=-/MOV00005.MPG was modified and yesterday BLAKE2 hash key mismatch (updated), /mnt/disk1/Photos/2015 xxxxxxxx/DSC_5258.JPG was modified BLAKE2 hash key mismatch (updated), /mnt/disk1/Photos/2015 xxxxxxx/xxxxxxx/DSC_5422.JPG was modified BLAKE2 hash key mismatch (updated), /mnt/disk1/Photos/2015 xxxxxxx/xxxxxxx/DSC_5423.JPG was modified BLAKE2 hash key mismatch (updated), /mnt/disk1/Photos/2016 - 2017 xxxxxxx/-=Videos=-/MVI_0048.m4v was modified If I remember correctly I checked those files with beyond compare (binary comparison) and didn't see any siggnificant difference so I copied my backup file to server. I replaced Unraid files from one of my backups. But I got again errors yesterday so I need to find what Is causing this. Any ideas?

For testing I set the Max user watches to 1000000 and it worked with version 2017.02.21. Very very useful plugin. Thank you. What value so I change the Max user watches to? Ps. Is it possible, when the file is accessed to catch who is doint it? Even if it's just a localhost or some other ip is very useful.

And I just remembered this inotifywait must be from the File Integrity plugin!

I have this line root 8465 1 0 01:24 ? 00:00:04 inotifywait -dsrqo /var/run/hash.pipe -e close_write --exclude ^/mnt/disk[0-9]+/Backups|CommunityApplicationsAppdataBackup,Do*****,Squidbait-beef,Squidbait-blue,Squidbait-compare,Squidbait-could,Squidbait-evidently,Squidbait-glimpse,Squidbait-hand,Squidbait-isten,Squidbait-other,Squidbait-place,TV***** --format %w%f /mnt/disk1 I have parity, disk1, disk2 and cache. The files I tried to open definately are not in cache drive.

I use latest Unraid and latest File Activity plugin. I set settings to Yes, No, No and apply, but it doesn't show anything in file activity tab. I tried to open a movie, browse folder but it doesn't show anything there. Any idea of what I should try?

I am trying to install https://apps.nextcloud.com/apps/previewgenerator but I am stuck here I need to get into nextcloud docker and there add the cronjob right? got into docker with docker exec -i -t nextcloud /bin/bash but now I am lost!

Did that, opened the exported file with Libre Calc used Find all for folder Photos which is the only one I need, deleted all cells contained that text and nothing remained. One thing that could trigger the problem is that I have folders with Greek characters. I don't know how the plugin works but I thought I should mention just in case!

It just happened again! Both disks appear that build is not up to date!

See bonienl's message two comments ago, should help with exclusions. Just did it and cleared some files. Will get back if I get build-up-to-date = false again

I still get file integrity check for files excluded. I had removed/deleted files and reinstalled the plugin but I can't get it right. Also, very often I get not updated build in disk2 but I have enabled Automatically protect new and modified files: Lastly, I have excluded .tonidodb files but it checked it during scheduled verification check Event: unRAID file corruption Subject: Notice [TOWER] - bunker verify command Description: Found 3 files with BLAKE2 hash key corruption Importance: alert BLAKE2 hash key mismatch, /mnt/disk1/Photos/2003 - 2014 ?????/2008 - 2009 ?????/xxxxxxxxxxxxxxxxx/.tonidodb is corrupted BLAKE2 hash key mismatch, /mnt/disk1/Photos/2003 - 2014 ?????/2012 - 2013 ?????/xxxxxxxxxxxxxxxxxx/.tonidodb is corrupted BLAKE2 hash key mismatch, /mnt/disk1/Photos/2003 - 2014 ?????/2012 ???/xxxxxxxxxxxxxxxxxx/.tonidodb is corrupted BLAKE2 hash key mismatch (updated), /mnt/disk1/TV Series/xxxxxxxxxxxxxxxxx/xxxxxxxxxxxx - S01E10 - xxxxxxHDTV-1080p.nfo was modified Pics https://www.dropbox.com/sh/9jb8b7yb79fkjsk/AACE1EA6A9ltaHSagcIVm1dPa?dl=0 Any ideas?

Wouldn't be better to modify permissions to read only instead of I don't know if a plugin has enough permissions to make such a change, though. EDIT: Forgot to say thank you

Hi! I have been using plex for more than a year now. I noticed in my routers logs blocking access for a few android devices with plex app installed trying to connect to a bogon IP address. I found this address also in Plex docker. Does anyone have any idea what is going on? The weird thing is that the android devices are looking for 172.17.0.1 outside my lan in the internet. I googled before posting and the only think related (I think) is this https://github.com/timhaak/docker-plex/issues/54 09:19:19 firewall,info drop 172 forward: in:bridge-local out:pppoe-out1, src-mac xxxxxxx, proto TCP (SYN), 192.168.1.63:39411->172.17.0.1:32400, len 6 0 ErrorWarningSystemArrayLogin [s6-init] making user provided files available at /var/run/s6/etc...exited 0. [s6-init] ensuring user provided files have correct perms...exited 0. [fix-attrs.d] applying ownership & permissions fixes... [fix-attrs.d] done. [cont-init.d] executing container initialization scripts... [cont-init.d] 10-adduser: executing... ------------------------------------- _ _ _ | |___| (_) ___ | / __| | |/ _ \ | \__ \ | | (_) | |_|___/ |_|\___/ |_| Brought to you by linuxserver.io We do accept donations at: https://www.linuxserver.io/donations ------------------------------------- GID/UID ------------------------------------- User uid: 99 User gid: 100 ------------------------------------- [cont-init.d] 10-adduser: exited 0. [cont-init.d] 30-dbus: executing... [cont-init.d] 30-dbus: exited 0. [cont-init.d] 40-chown-files: executing... [cont-init.d] 40-chown-files: exited 0. [cont-init.d] 50-plex-update: executing... No update required [cont-init.d] 50-plex-update: exited 0. [cont-init.d] done. [services.d] starting services Starting dbus-daemon Starting Plex Media Server. [services.d] done. dbus[274]: [system] org.freedesktop.DBus.Error.AccessDenied: Failed to set fd limit to 65536: Operation not permitted 6 3000 /config/Library/Application Support d Starting Avahi daemon Found user 'avahi' (UID 106) and group 'avahi' (GID 107). Successfully dropped root privileges. avahi-daemon 0.6.32-rc starting up. No service file found in /etc/avahi/services. *** WARNING: Detected another IPv4 mDNS stack running on this host. This makes mDNS unreliable and is thus not recommended. *** socket() failed: Address family not supported by protocol Failed to create IPv6 socket, proceeding in IPv4 only mode socket() failed: Address family not supported by protocol Joining mDNS multicast group on interface virbr0.IPv4 with address 192.168.122.1. New relevant interface virbr0.IPv4 for mDNS. Joining mDNS multicast group on interface docker0.IPv4 with address 172.17.0.1. New relevant interface docker0.IPv4 for mDNS. Joining mDNS multicast group on interface br0.IPv4 with address 192.168.1.2. New relevant interface br0.IPv4 for mDNS. Network interface enumeration completed. Registering new address record for 192.168.122.1 on virbr0.IPv4. [b]Registering new address record for 172.17.0.1 on docker0.IPv4.[/b] Registering new address record for 192.168.1.2 on br0.IPv4. Server startup complete. Host name is TOWER.local. Local service cookie is 1897350774.

I can't understand why you insist so much. You use an insecure OS so you have to protect it. You ask for 6.1.10 because you or someone else doesn't like 6.2. If they release 6.1.10 today are you going to ask for 6.1.11 in a month when new security holes will have been discovered?

I don't disagree. But if you read carefully the second post, 6.1.9 was not anymore updated because 6.2 was about to be released. And if you ask for 6.1.10 for plugins/script compatibility, why not release 6.1.11 in a few months. Also, (I am asking) security patching never produces bugs? Lastly, as UnRaid is not the safest OS out there and everyone knows about it, using proper firewall rules provides the best "security patch". It's not the same, but by firewall securing the server, the security holes can not be accessed.

To play Devil's Advocate, I'd like to give a reason for creating 6.1.10: 6.2 runs a new version of the kernel and some of the stock OS commands returns data in a different format than the same command in 6.1.x. Programs that expect data to exist in a certain spot from these modified commands are now broken under 6.2. My disk speed script in my sig doesn't function under 6.2 for example but does for every version from 5.0 to 6.1.9 One advantage to UNRAID is it's versatility. There are many released scripts & plugins available but who knows how many custom scripts are out there that people have written/acquired for their own use that may be broken under 6.2 forcing them to roll back if they're critical to them. it does not seem logical you suggest they maintain two parallel versions 6.1.x and x being 6.2 in a few days and so on sometime 6.1.x has to stop being developed when it was released sounds fair so all the development goes to the new versions

Hi again! I tried in the past to run 2 dropbox dockers (me and wife) but without success. After a few days (probably after modifying files through lan) they stop working. So I ended up creating a VM just for dropbox! I read that topic http://lime-technology.com/forum/index.php?topic=48166 and I thought to give another try. What are the drawbacks of this? I use public and private shares and connect with custom user and not root.

i got it working by bridging 443 port

So I will have to delete and reinstall. Right? Why don't you make a template for beta versions? <- I don't mind the effort. Just to get more people testing for you.

still nothing on port 80 i tried http://192.168.1.2:9580 and https://192.168.1.2:9580 45566/tcp 192.168.1.2:45566 45567/tcp 192.168.1.2:45567 45568/tcp 192.168.1.2:45568 45569/tcp 192.168.1.2:45569 45570/tcp 192.168.1.2:45570 45571/tcp 192.168.1.2:45571 45572/tcp 192.168.1.2:45572 45573/tcp 192.168.1.2:45573 45574/tcp 192.168.1.2:45574 45575/tcp 192.168.1.2:45575 45576/tcp 192.168.1.2:45576 80/tcp 192.168.1.2:9580 9527/tcp 192.168.1.2:9527 https SSL connection error ERR_SSL_PROTOCOL_ERROR http This webpage is not available ERR_CONNECTION_REFUSED

docker create --name=rutorrent -v <path to config>:/config -v <path to downloads>:/downloads -e PGID=100 -e PUID=99 -p 9527:9527 -p 45566-45576:45566-45576 lsiodev/rutorrent thanks! Installed fine with the settings picture below but I can't get to the webui at port 9527 which I believe is the right one as you bridged it. ----------------------------------- _ _ _ | |___| (_) ___ | / __| | |/ _ \ | \__ \ | | (_) | |_|___/ |_|\___/ |_| Brought to you by linuxserver.io ----------------------------------- GID/UID ----------------------------------- User uid: 99 User gid: 100 ----------------------------------- We are now refreshing packages from apt repositorys, this *may* take a while Update: OK generating self-signed keys in /config/keys, you can replace these with your own keys if required Already up-to-date. Jan 27 09:34:40 05437ea3544d syslog-ng[152]: syslog-ng starting up; version='3.5.3' Jan 27 09:39:01 05437ea3544d /USR/SBIN/CRON[169]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime)) ----------------------------------- _ _ _ | |___| (_) ___ | / __| | |/ _ \ | \__ \ | | (_) | |_|___/ |_|\___/ |_| Brought to you by linuxserver.io ----------------------------------- GID/UID ----------------------------------- User uid: 99 User gid: 100 ----------------------------------- We are now refreshing packages from apt repositorys, this *may* take a while ----------------------------------- _ _ _ | |___| (_) ___ | / __| | |/ _ \ | \__ \ | | (_) | |_|___/ |_|\___/ |_| Brought to you by linuxserver.io ----------------------------------- GID/UID ----------------------------------- User uid: 99 User gid: 100 ----------------------------------- We are now refreshing packages from apt repositorys, this *may* take a while Update: OK using keys found in /config/keys Updating ac064a4..e7b4e5b Fast-forward plugins/extsearch/engines/RUTracker.php | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) mode change 100644 => 100755 plugins/extsearch/engines/RUTracker.php Jan 27 09:45:34 05437ea3544d syslog-ng[128]: syslog-ng starting up; version='3.5.3' https://www.dropbox.com/s/vziyw9lyx7am33m/Capturert.JPG?dl=0

I just want to confirm that it's working fine! Great work! I used /config /mnt/cache/appdata/jackett/ /downloads /mnt/cache/Downloads/Droptorrents/ Where I use the folder Droptorrents in Deluge as a watch folder. I think, in description you should say watch folder not, /downloads : Point to Downloads location

I am willing to test http://feathub.com/linuxserver/linuxserver.github.io/+14 Is there any short guide on how to install it? I have an idea but I am not sure if there is a better way!

thanks! will try tomorrow! next wish is a working dropbox docker and my windows vm can shut down