Lobsi

Hey LNXD, I tried it already, unfortunately it did not run, i get the same error; Project: PhoenixMiner 5.5c Author: lnxd Base: Ubuntu 14.04.02 Target: Unraid 6.9.0 - 6.9.1 Wallet: 3K4kD8QijmqAJHEqijhWe5Nnbu4CvdURJB Pool: asia1.ethermine.org:4444 Starting PhoenixMiner 5.5c with the following arguments: -pool asia1.ethermine.org:4444 -wal 3K4kD8QijmqAJHEqijhWe5Nnbu4CvdURJB.x -tt 75 -tstop 85 -tstart 80 -cdm 1 -cdmport 5450 -amd Phoenix Miner 5.5c Linux/gcc - Release build -------------------------------------------- [0mNo OpenCL platforms found [91mNo avaiable GPUs for mining. Please check your drivers and/or hardware. [0m I could understand when you are a little exhausted, dealing some year old s**t is often complicated. Thank you very much for your efforts, i hope you will find the igniting spark *fingerscrossing*

Ah, i see i have misunderstood, no Problem... I "modprobed" my GPU and then i were force-updateing the container, it seems the Version is as you mentioned Debian Bullseye. Here is the output from the log: Project: PhoenixMiner 5.5c Author: lnxd Base: Debian Bullseye Target: Unraid 6.9.0 - 6.9.1 Wallet: 3K4kD8QijmqAJHEqijhWe5Nnbu4CvdURJB Pool: asia1.ethermine.org:4444 Starting PhoenixMiner 5.5c with the following arguments: -pool asia1.ethermine.org:4444 -wal 3K4kD8QijmqAJHEqijhWe5Nnbu4CvdURJB.x -tt 75 -tstop 85 -tstart 80 -cdm 1 -cdmport 5450 -amd Phoenix Miner 5.5c Linux/gcc - Release build -------------------------------------------- [0mNo OpenCL platforms found [91mNo avaiable GPUs for mining. Please check your drivers and/or hardware. [0m The issue persists, the container is not finding any OpenCL Platform nor an available GPU Is there anything i could help you to better understanding the issue? Do you need further logs or anything?

Hi LNXD, Thank you for your engagement, i much appreciate that! When i check the logs, ill get the following: Base: Ubuntu 20.04 As i understand, the container is not taking 1404 as base then? There must be something wrong with it. Maybe this helps to resolve what is going on?

Hi LNXD, I can confirm i completed steps 1-7 (except putting in the correct pool adress, i haven`t registered to any pool until the card is running). But this should be no reason to not do a test first... I also put my Card asleep like you mentioned, and updated the repository / docker. Unfortunately i get the same error, the card does`nt get recognized. Project: PhoenixMiner 5.5c Author: lnxd Base: Ubuntu 20.04 Target: Unraid 6.9.0 - 6.9.1 Wallet: 3K4kD8QijmqAJHEqijhWe5Nnbu4CvdURJB Pool: asia1.ethermine.org:4444 Starting PhoenixMiner 5.5c with the following arguments: -pool asia1.ethermine.org:4444 -wal 3K4kD8QijmqAJHEqijhWe5Nnbu4CvdURJB.x -tt 75 -tstop 85 -tstart 80 -cdm 1 -cdmport 5450 -amd Phoenix Miner 5.5c Linux/gcc - Release build -------------------------------------------- [0mNo OpenCL platforms found [91mNo avaiable GPUs for mining. Please check your drivers and/or hardware. [0m Do you have any other idea?

Here are more (lspci -v) details: 02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Curacao XT / Trinidad XT [Radeon R7 370 / R9 270X/370X] (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Curacao XT / Trinidad XT [Radeon R7 370 / R9 270X/370X] Flags: fast devsel, IRQ 10, IOMMU group 19 Memory at d0000000 (64-bit, prefetchable) [disabled] [size=256M] Memory at f7a00000 (64-bit, non-prefetchable) [disabled] [size=256K] I/O ports at d000 [disabled] [size=256] Expansion ROM at f7a40000 [disabled] [size=128K] Capabilities: [48] Vendor Specific Information: Len=08 <?> Capabilities: [50] Power Management version 3 Capabilities: [58] Express Legacy Endpoint, MSI 00 Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Capabilities: [150] Advanced Error Reporting Capabilities: [270] Secondary PCI Express Capabilities: [2b0] Address Translation Service (ATS) Capabilities: [2c0] Page Request Interface (PRI) Capabilities: [2d0] Process Address Space ID (PASID) Kernel modules: radeon, amdgpu 02:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Oland/Hainan/Cape Verde/Pitcairn HDMI Audio [Radeon HD 7000 Series] Subsystem: ASUSTeK Computer Inc. Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] Flags: bus master, fast devsel, latency 0, IRQ 5, IOMMU group 19 Memory at f7a60000 (64-bit, non-prefetchable) [size=16K] Capabilities: [48] Vendor Specific Information: Len=08 <?> Capabilities: [50] Power Management version 3 Capabilities: [58] Express Legacy Endpoint, MSI 00 Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Capabilities: [150] Advanced Error Reporting

Hi LNXD, Currently i am using Version 6.9.0-rc2, the current next branch.

Dear LNXD, I like to ask if the AMD R9 270X is supported? My Graphics Card is the following: IOMMU group 19:[1002:6810] 02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Curacao XT / Trinidad XT [Radeon R7 370 / R9 270X/370X] [1002:aab0] 02:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Oland/Hainan/Cape Verde/Pitcairn HDMI Audio [Radeon HD 7000 Series] I get the following Error: ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Project: PhoenixMiner 5.5c Author: lnxd Base: Ubuntu 20.04 Target: Unraid 6.9.0 - 6.9.1 Wallet: 3K4kD8QijmqAJHEqijhWe5Nnbu4CvdURJB Pool: asia1.ethermine.org:4444 Starting PhoenixMiner 5.5c with the following arguments: -pool asia1.ethermine.org:4444 -wal 3K4kD8QijmqAJHEqijhWe5Nnbu4CvdURJB.x -tt 75 -tstop 85 -tstart 80 -cdm 1 -cdmport 5450 -amd Phoenix Miner 5.5c Linux/gcc - Release build -------------------------------------------- [0mOpenCL driver version: 20.20-1089974-ubuntu-20.04 [91mNo avaiable GPUs for mining. Please check your drivers and/or hardware. [0m ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Is there a way to get my 270X recognized by the docker anyways? I would love it to give my old Card a reason to consume power in my Unraid server

Hello friends of Unraid, I would like to know where i am struggling... I just arrived to setup my personal OneDrive and i were able to see my files who are already on my OneDrive by using "Rclone ls Onedrive:"... For now i try to Mount the Onedrive but i dont arrive it. Is it possible to mount the drive by using unassigned devices plugin somehow? It would be nice to make the OneDrive available in the /mnt directory. What i have seen is the directory /mnt/disks/rclone_volume but the directory is empty (watching with WinSCP)... I would like to expose the Onedrive as share from unraid, could this be done somehow?

Hello all, I would like to ask about the support of larger Files then 20GB. Me and a co-worker wer trying to upload a large (40GB) Iso Image but the transfer stopped @ the Size of 20GB (WinSCP is reporting filesize 19908MB). Is it possible to upload the whole file, without splitting it? Thank you for a fast response, have a nice day and stay healthy! Simon

Okay, after a few retries i throw the hand towel. I dont get it to work until now, so i have to think about moving away from unraid and get 2 FreeNAS boxes (using ESXi with the compromise of being less power saveing due lack of spindown etc...) and use ZFS instead The most annoying thing is to waive the Unraid File handling and i`ve got used to unraid. To make a last hurrah, is there any Snapshot plugin or Unraid base OS support for BTRFS snapshots (to another unraid host) planned in future?

I would love it to be able to use BTRFS snapshots in a GUI (Setup Snapshots) and beeing able to set up BTRFS snapshotting (send / receive) to another Unraid Server, this would be a really nice and powerful feature i would never miss! Hope this will be implemented soon! so there is another +1 from me

Okay so i am on the wrong way... sorry i am a bit confused because i am not very deep knowing about btfrs sync. Do you have an idea how i finally could snap the 4 4tb disks as you mentioned before? From my point of view it should be possible to create some virtual (?) subvolumes on the offsite server to put the snapshots from the mainserver in it, but right now i am unable to get this working.

My idea is to trigger the destination unraid servers unraid mechanic by using the /mnt/users directory For now i did the following change to your script: btrfs send -p /mnt/disk$i/snaps/$sd /mnt/disk$i/snaps/"$sh"_$nd | pv -prtabe -s "$t"M | ssh root@$ip "btrfs receive /mnt/users/snaps/disk$i" Unfortunately i am further not able to make the initial snapshot from source server to destination server, to use your script once the initial snapshot is made.

Due my 20 TB unraid array is only filled with 8TB data now i could live with this circumstance. It would be nice if you can get me the idea how i could do that. Even it would be nice to know how i could scale this, if i add more drives to the offsite Server (replace small case with bigger one one time).

Oh no, i hoped so much this is not needed... My small server does only have 3 HDD-slots, so i am unable to provide the same amount of disks of my main server. The configuration of the main Server is 1x 8TB for parity and 5x 4TB for any kind of Data. Is there no way to put the snapshots in directories labled as the disks name?