mbc0

I did wonder if it was they were both called silicondust? but one is silicondust telly and the other is silicondust tvhproxy where do you change the ID I already looked in the docker template but couldn't see anything?

Hi, thanks for your replies, I have been adding the telly virtual tuner manually and it does work but it keeps disappearing (Device not found error) if I reboot Plex it does come back but then disappears again? I have literally just made a bit of a discovery though that may be connected to the issue... as telly only does IPTV I still need to be able to connect to my tvheadend setup and for that I use tvhproxy, it would seem that although Plex offers the option to add further tuners after I do so all it is actually doing is changing the IPTV address of telly? For example my telly ip is 192.168.0.33:6077 and if I manually enter that into Plex it works... then if I click add tuner underneath the telly tuner in plex I can enter the ip address of my tvhproxy which is 192.168.0.40:5004 and plex finds all the tvheadend channels and all seems well except when it has completed Plex is showing just one tuner labelled telly but shows the IP address of my tvhproxy tuner???

Hi, I am having difficulty trying to get this to work, occasionally if I reboot Plex I see a telly tuner available but it quickly disappears. I have Plex in Host Mode and have tried telly in bridge and br0 with no luck. If I manually enter the IP and port into Plex when in br0 mode nothing is found here is my log, should it be 0.0.0.0:6077 even if I enter an IP in br0 mode? [telly] [info] booting telly v0.4.5[telly] [info] Downloading file(deleted intentionally.m3u[telly] [info] Reading m3u file /telly.m3u...[telly] [warning] telly is not attempting to strip out unneeded channels, please use the flag -filterregex if telly returns too many channels[telly] [info] telly is currently not filtering for only uk television. if you would like it to, please use the flag -uktv[telly] [info] found 80 channels[telly] [info] creating discovery data[telly] [info] creating lineup status[telly] [info] creating device xml[telly] [info] creating webserver routes[telly] [info] Building lineup[telly] [info] listening on 0.0.0.0:6077

Hi, I am having difficulty trying to get this to work, occasionally if I reboot Plex I see a telly tuner available but it quickly disappears. I have Plex in Host Mode and have tried telly in bridge and br0 with no luck. If I manually enter the IP and port into Plex when in br0 mode nothing is found here is my log, should it be 0.0.0.0:6077 even if I enter an IP in br0 mode? [telly] [info] booting telly v0.4.5[telly] [info] Downloading file(deleted intentionally.m3u[telly] [info] Reading m3u file /telly.m3u...[telly] [warning] telly is not attempting to strip out unneeded channels, please use the flag -filterregex if telly returns too many channels[telly] [info] telly is currently not filtering for only uk television. if you would like it to, please use the flag -uktv[telly] [info] found 80 channels[telly] [info] creating discovery data[telly] [info] creating lineup status[telly] [info] creating device xml[telly] [info] creating webserver routes[telly] [info] Building lineup[telly] [info] listening on 0.0.0.0:6077

I know what you mean, you have to grab it when you can!! :-D

Hi @Squid thanks for the reply, I am using CA Backup for everything, but had disabled Plex from the backup due to the time it used to take, it looks like it has now enabled itself probably due to an update or something and completed in a good time so all is good! :-)

OK, I will try that but I would need to find the CLI for my preset I guess?

Hi, I am having an issue with aspect ratio using this docker which I only get using the watch folders, if I use the GUI it is fine! For example I use the same custom preset I created for HEVC 720P and if I use the same preset on this docker or any of my machines via GUI I input the same file 1920 x 800 and get 1280 X 534 out due to the width being set to 1280 & the keep aspect ratio being ticked with Anamorphic disabled. However if I use the same preset, same input file via the watch folder I get 1280 X 720p out which obviously looks horribly distorted. I do not want to waste your time as this does not seem to be docker specific as I get the same on this docker that I use on my Ubuntu installation (https://github.com/jlesage/docker-handbrake/issues/12) so it seems to be a handbrake issue/bug? Many Thanks

HI, After having a squeaky bum moment this morning losing 5 disks including cache SSD (where my Plex install is) it made me wonder how I would recover should I lose that Cache SSD? When I mean recover I mean everything, watch status, movies that I have corrected that had been identified incorrectly etc. I know Plex does a backup but am not sure that it backs up everything? Any advice?

Hi, fps is not as consistent with this version but the net result is the same unfortunately. it is fluctuating between 3fps - 20fps. any ideas what could be causing the slow processing? looking at the log you would think it would be slow disk speed but all my tests have been from the same 500mb file on the same disk.

Hi, Yes just with HEVC X264 seems fine! Will change version now :-)

Just been doing some testing using the same HEVC Presets, everything is on the same machine with the same amount of cores available and no GPU Passthrough, Windows 10 VM Handbrake 38fps Linux Mint VM Handbrake 41fps Linux Mint VM FFMPEG 39fps Handbrake Docker 9fps Any ideas?

No, nothing passed through on the VM I just use X2go Remote Connection, I only use CPU encoding not GPU

Thanks for that! I am having performance issues with the docker as encoding X265 I am only getting approx 9fps but if I use the same profile on a Windows VM (on the same unraid server) I get 40+ fps any ideas? my CPU has all cores maxed out and no other processes running...

Hi, Can anyone point me in the right direction as to why deluge might not be moving completed downloads the completed downloads just sit in the downloads directory As far as I can see there is no problem with my config, I cannot find a logfile to tell me any different? Many Thanks!

aha thank you, set to 10 so hopefully that will not affect Plex, just out of interest will it always run at priority 10 no matter what or will it know if another process is using cpu? I guess being a docker it will not be able to know if something else is calling on the CPU? Thanks again :-)

This really is a great docker! Thank you so much for your hard work!! This is going to save me a lot of time and is very convenient compared to my current but soon to be old setup! As my server is also running Plex is there a way to handle CPU usage as I would need Plex to have priority over Handbrake. Again.. Thanks this is brilliant!

FFS! I was in Chrome (As Always) tried Edge & all is working as expected! Sorry to have been wasting your time!

I just reinstalled, only values entered where the folders (watch, output etc) Same problem, no errors in log? What do you mean docker command it ran? Thanks for your time!

ok, I will delete it and reinstall again

Hi, I cannot really see any errors in the log? would you mind taking a look please? hbrake.txt

Hi, thanks for the quick reply! Here is the log but it's just telling me I cannot connect? 2018/02/16 18:34:18 [error] 784#784: *7 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: 192.168.0.2, server: , request: "GET /websockify HTTP/1.1", upstream: "http://127.0.0.1:5900/websockify", host: "192.168.0.33:7803" 2018/02/16 18:34:25 [error] 784#784: *9 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: 192.168.0.2, server: , request: "GET /websockify HTTP/1.1", upstream: "http://127.0.0.1:5900/websockify", host: "192.168.0.33:7803" 2018/02/16 18:34:28 [error] 784#784: *11 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: 192.168.0.2, server: , request: "GET /websockify HTTP/1.1", upstream: "http://127.0.0.1:5900/websockify", host: "192.168.0.33:7803" 2018/02/16 18:34:55 [error] 784#784: *13 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: 192.168.0.2, server: , request: "GET /websockify HTTP/1.1", upstream: "http://127.0.0.1:5900/websockify", host: "192.168.0.33:7803" 2018/02/16 18:35:00 [error] 784#784: *15 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: 192.168.0.2, server: , request: "GET /websockify HTTP/1.1", upstream: "http://127.0.0.1:5900/websockify", host: "192.168.0.33:7803" 2018/02/16 18:36:09 [error] 784#784: *18 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: 192.168.0.2, server: , request: "GET /websockify HTTP/1.1", upstream: "http://127.0.0.1:5900/websockify", host: "192.168.0.33:7803" 2018/02/16 21:00:58 [error] 784#784: *26 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: 192.168.0.2, server: , request: "GET /websockify HTTP/1.1", upstream: "http://127.0.0.1:5900/websockify", host: "192.168.0.33:7803" 2018/02/17 00:19:53 [error] 784#784: *34 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: 192.168.0.2, server: , request: "GET /websockify HTTP/1.1", upstream: "http://127.0.0.1:5900/websockify", host: "192.168.0.33:7803" 2018/02/17 01:19:44 [error] 784#784: *42 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: 192.168.0.2, server: , request: "GET /websockify HTTP/1.1", upstream: "http://127.0.0.1:5900/websockify", host: "192.168.0.33:7803"

Hi, This is exactly what I am after but even though everything installs ok I get server disconnected 1006 on the gui?

Still nothing?

Thank You! :-)