cyriouslydylan

Just in case anyone finds this thread in the future, I did not have any luck with this renesas chipped card: https://www.amazon.com/dp/B081Y4NT25?psc=1&ref=ppx_yo2_dt_b_product_details This one didn't even populate in the IOMMU group in System Devices

Thank you for the help, I'll probably just swap it for a new one. Looking closer at the stuff I pasted I do see where you got that from: Well I very much appreciate the help either way!

If this thread is to be believed the VLI-805 chip should be supported:

Wow if that's the answer I'm going to be very annoyed with myself... In the reviews someone said: Is that xhci_hdc driver not something that unraid has?

Howdy, I have a Dell R710, and I recently purchased a 4-port usb 3.0 PCIE card: https://www.amazon.com/dp/B07W82SV3V?psc=1&ref=ppx_yo2_dt_b_product_details I can see it in system devices: IOMMU group 18: [1106:3483] 07:00.0 USB controller: VIA Technologies, Inc. VL805/806 xHCI USB 3.0 Controller (rev 01) Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub But no drives show up when they are connected (though they do power on when plugged in).

Hey all, I just today updated to the latest version, and suddenly when running, my CPU gets pegged at 100%, with like 80-90% iowait. it only is when running this docker, not affected by any others, or moving files.

Memtest was clean, but it looks like it was Krusader related. After a reboot, running Syncthing doesn't fill my log up, but Krusader does, so at least I narrowed down the issue there.

OK will do. I'm about 98% through a big move, so going to wait for that to finish, then run the memtest which can take a while, so will report back when that's done. I also realized my BIOS was version 6.4.0 and not 6.6, so going to do that update as well.

Hey all, I've been migrating data from one server to another, and I've been using Krusader to move a share over to the new one, then Syncthing to ensure that the files moved are all the same/not corrupted etc. Problem is, my LOG file is filling up, and when I download it i get a ton of this type of thing repeated over and over: Apr 28 22:15:51 R170 kernel: WARNING: CPU: 5 PID: 16380 at lib/iov_iter.c:1203 iov_iter_pipe+0x11/0x33 Apr 28 22:15:51 R170 kernel: Modules linked in: md4 sha512_ssse3 sha512_generic cmac cifs libarc4 xt_mark xt_CHECKSUM ipt_REJECT nf_reject_ipv4 ip6table_mangle ip6table_nat iptable_mangle nf_tables vhost_net tun vhost vhost_iotlb tap xt_nat xt_tcpudp veth xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter xfs md_mod ip6table_filter ip6_tables iptable_filter ip_tables x_tables bonding bnx2 intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel crypto_simd cryptd mpt3sas ipmi_ssif glue_helper i2c_core wmi input_leds intel_cstate raid_class led_class scsi_transport_sas acpi_power_meter intel_uncore i7core_edac ata_piix ipmi_si button [last unloaded: bnx2] Apr 28 22:15:51 R170 kernel: CPU: 5 PID: 16380 Comm: file.so Tainted: G W I 5.10.28-Unraid #1 Apr 28 22:15:51 R170 kernel: Hardware name: Dell Inc. PowerEdge R710/00NH4P, BIOS 6.4.0 07/23/2013 Apr 28 22:15:51 R170 kernel: RIP: 0010:iov_iter_pipe+0x11/0x33 Apr 28 22:15:51 R170 kernel: Code: 8b 4f 08 75 05 8b 56 08 eb 04 48 8b 56 08 48 29 ca 48 39 d0 48 0f 47 c2 c3 85 f6 74 02 0f 0b 8b 42 50 2b 42 54 39 42 5c 77 02 <0f> 0b c7 07 20 00 00 00 48 89 57 18 8b 42 50 48 c7 47 08 00 00 00 Apr 28 22:15:51 R170 kernel: RSP: 0018:ffffc90007943d38 EFLAGS: 00010246 Apr 28 22:15:51 R170 kernel: RAX: 0000000000000010 RBX: ffff888c57e7a100 RCX: 0000000000000000 Apr 28 22:15:51 R170 kernel: RDX: ffff888151788240 RSI: 0000000000000000 RDI: ffffc90007943d40 Apr 28 22:15:51 R170 kernel: RBP: ffff888c57e7a100 R08: 0000000000000000 R09: 0000000007943cc8 Apr 28 22:15:51 R170 kernel: R10: ffffc90007943cc8 R11: ffff889808514300 R12: 0000000000000104 Apr 28 22:15:51 R170 kernel: R13: ffffc90007943df0 R14: ffffc90007943e38 R15: 000000000007fefc Apr 28 22:15:51 R170 kernel: FS: 00007f4691155800(0000) GS:ffff888c0fa80000(0000) knlGS:0000000000000000 Apr 28 22:15:51 R170 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Apr 28 22:15:51 R170 kernel: CR2: 000055bb5d638230 CR3: 0000000171e94005 CR4: 00000000000206e0 Apr 28 22:15:51 R170 kernel: Call Trace: Apr 28 22:15:51 R170 kernel: generic_file_splice_read+0x2c/0x15e Apr 28 22:15:51 R170 kernel: splice_direct_to_actor+0xe4/0x1cd Apr 28 22:15:51 R170 kernel: ? generic_file_splice_read+0x15e/0x15e Apr 28 22:15:51 R170 kernel: do_splice_direct+0x94/0xbd Apr 28 22:15:51 R170 kernel: do_sendfile+0x185/0x24f Apr 28 22:15:51 R170 kernel: __do_sys_sendfile64+0x61/0xa7 Apr 28 22:15:51 R170 kernel: do_syscall_64+0x5d/0x6a Apr 28 22:15:51 R170 kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9 Apr 28 22:15:51 R170 kernel: RIP: 0033:0x7f469460a68e Apr 28 22:15:51 R170 kernel: Code: c3 0f 1f 00 4c 89 d2 4c 89 c6 e9 bd fd ff ff 0f 1f 44 00 00 31 c0 c3 0f 1f 44 00 00 f3 0f 1e fa 49 89 ca b8 28 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d d2 a7 0c 00 f7 d8 64 89 01 48 Apr 28 22:15:51 R170 kernel: RSP: 002b:00007ffe050916d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 Apr 28 22:15:51 R170 kernel: RAX: ffffffffffffffda RBX: 00007ffe05091790 RCX: 00007f469460a68e Apr 28 22:15:51 R170 kernel: RDX: 00007ffe050917b0 RSI: 0000000000000005 RDI: 0000000000000007 Apr 28 22:15:51 R170 kernel: RBP: 00007ffe05111b20 R08: 0000000000000000 R09: 0000000000000001 Apr 28 22:15:51 R170 kernel: R10: 0000000000080000 R11: 0000000000000246 R12: 00007ffe05091780 Apr 28 22:15:51 R170 kernel: R13: 00007ffe050917b0 R14: 00007ffe05091748 R15: 00007ffe05091740 I have attached my full log file below, and any help would be appreciated! r170-diagnostics-20210430-0905.zip

That was it, Toronto which was previously working, isn't anymore. Thanks!

Is there any sort of documentation on a list of things to troubleshoot if the webUI isn't loading? Still can't get it to load over here and not seeing any obvious flags as to why it wouldn't be doing so. Editing to attach my supervisor log supervisord.log Looking at this now in debug mode, I'm seeing a few issues: 2021-04-14 14:06:31.398159 [info] VPN_ENABLED defined as 'yes' 2021-04-14 14:06:31.422447 [warn] VPN_CLIENT not defined (via -e VPN_CLIENT), defaulting to 'openvpn' 2021-04-14 14:06:31.445822 [info] VPN_PROV defined as 'pia' I don't see a VPN_CLIENT variable in the unraid docker, I'm using PIA as shown in the VPN_PROV field 2021-04-14 14:06:34,141 DEBG 'start-script' stderr output: modprobe: FATAL: Module tun not found in directory /lib/modules/5.10.21-Unraid 2021-04-14 14:06:34,141 DEBG 'start-script' stdout output: [warn] Unable to load tun kernel module using modprobe, trying insmod... 2021-04-14 14:06:34,142 DEBG 'start-script' stderr output: insmod: ERROR: could not load module /lib/modules/tun.ko: No such file or directory 2021-04-14 14:06:34,143 DEBG 'start-script' stdout output: [warn] Unable to load tun kernel module, assuming its dynamically loaded Not sure what to do with this one, or if it's an issue 2021-04-14 14:08:42,185 DEBG 'start-script' stdout output: [warn] Unable to download PIA json to generate token, exiting script... [info] Port forwarding failure, creating file '/tmp/portfailure' to indicate failure... Cant seem to locate that portfailure doc to further investigate this one If I had to guess I'd say the lack of the PIA token is preventing the web-ui from loading, just not sure how to fix that guy as it had been working fine, and I have the RPC2_Pass and WEBUI_Pass defined as based on the Jan 15th update

I'm on latest, and I still can't access the webUI. Any help would be greatly appreciated. It's just refusing the connection: " Unable to connect Firefox can’t establish a connection to the server at 192.168.x.xx:xxxx."

Hey I recently have been unable to run the WebUI for the docker and in checking the logs I'm getting the following errors: 2021-03-24 15:20:33 DEPRECATED OPTION: --cipher set to 'aes-128-cbc' but missing in --data-ciphers (AES-256-GCM:AES-128-GCM). Future OpenVPN version will ignore --cipher for cipher negotiations. Add 'aes-128-cbc' to --data-ciphers or change --cipher 'aes-128-cbc' to --data-ciphers-fallback 'aes-128-cbc' to silence this warning. 2021-03-24 15:20:33,395 DEBG 'start-script' stdout output: 2021-03-24 15:20:33 WARNING: file 'credentials.conf' is group or others accessible There was another post talking about this one and theirs was fixed by a docker update, but mine is still having the issue. I'm using PIA and haven't had any issues for a while so not sure what's going on there.

Hey all, I'm having an issue using a SMB share as a disk share. It's very possible I'm just entirely missing something. I have a SMB share that I've added from a Synology server. I can see the SMB share in unassigned devices, and I can click on the mount point and see the files, but the disk isn't showing up in my disk shares, and I can't access it in krusader in order to move some files to it. I can also see the disk share through unraid in my windows computer.

I have both this docker and you SABnzvd-VPN dockers, but I can't launch them at the same time, it gives me a server error. So there must be some sort of conflict with having both?

Just following up on this. I think the issue happened because i left "move torrent data" checked when I pointed the torrent to where the data was saved. Even though nothing had been downloaded yet. After getting the VPN working, the torrent list was empty, and i've begun repopulating it again, and am having success at pointing the torrents to the data with this option unchecked. Where does rtorrent move the torrent files to? When I add them manually they remain in my torrents folder, but if I have the auto watch set up they disappear once they are added.

I still cannot connect to the webUI regardless of whether strict port forwarding is enabled or disabled. I would love if someone had some help. The docker worked fine prior to enabling PIA. Removed the log for now so this post isn't gigantic Apparently the Web UI now loads...

Having issues loading the web UI with VPN enabled - but I think a different issue than the other guys. I did change STRICT_PORT_FORWARD to 'no' as well: Created by... ___. .__ .__ \_ |__ |__| ____ | |__ ____ ___ ___ | __ \| |/ \| | \_/ __ \\ \/ / | \_\ \ | | \ Y \ ___/ > < |___ /__|___| /___| /\___ >__/\_ \ \/ \/ \/ \/ \/ https://hub.docker.com/u/binhex/ 2020-03-31 09:50:19.766167 [info] System information Linux ff866783be01 4.19.107-Unraid #1 SMP Thu Mar 5 13:55:57 PST 2020 x86_64 GNU/Linux 2020-03-31 09:50:19.790080 [info] PUID defined as '99' 2020-03-31 09:50:19.816530 [info] PGID defined as '100' 2020-03-31 09:50:19.903413 [info] UMASK defined as '000' 2020-03-31 09:50:19.926257 [info] Permissions already set for volume mappings 2020-03-31 09:50:19.952197 [info] VPN_ENABLED defined as 'yes' 2020-03-31 09:50:19.980783 [info] OpenVPN config file (ovpn extension) is located at /config/openvpn/CA Montreal.ovpn 2020-03-31 09:50:20.022962 [info] VPN remote line defined as 'remote ca-montreal.privateinternetaccess.com 1198' 2020-03-31 09:50:20.046463 [info] VPN_REMOTE defined as 'ca-montreal.privateinternetaccess.com' 2020-03-31 09:50:20.070006 [info] VPN_PORT defined as '1198' 2020-03-31 09:50:20.097143 [info] VPN_PROTOCOL defined as 'udp' 2020-03-31 09:50:20.125351 [info] VPN_DEVICE_TYPE defined as 'tun0' 2020-03-31 09:50:20.022962 [info] VPN remote line defined as 'remote ca-montreal.privateinternetaccess.com 1198' 2020-03-31 09:50:20.046463 [info] VPN_REMOTE defined as 'ca-montreal.privateinternetaccess.com' 2020-03-31 09:50:20.070006 [info] VPN_PORT defined as '1198' 2020-03-31 09:50:20.097143 [info] VPN_PROTOCOL defined as 'udp' 2020-03-31 09:50:20.125351 [info] VPN_DEVICE_TYPE defined as 'tun0' 2020-03-31 09:50:20.149778 [info] VPN_PROV defined as 'pia' 2020-03-31 09:50:20.173654 [info] LAN_NETWORK defined as '192.168.1.0/24' 2020-03-31 09:50:20.196838 [info] NAME_SERVERS defined as '209.222.18.222,84.200.69.80,37.235.1.174,1.1.1.1,209.222.18.218,37.235.1.177,84.200.70.40,1.0.0.1' 2020-03-31 09:50:20.219951 [info] VPN_USER defined as 'p2097454' 2020-03-31 09:50:20.244060 [info] VPN_PASS defined as 'Bangarang#860' 2020-03-31 09:50:20.267787 [info] VPN_OPTIONS not defined (via -e VPN_OPTIONS) 2020-03-31 09:50:20.292156 [info] STRICT_PORT_FORWARD defined as 'no' 2020-03-31 09:50:20.316153 [info] ENABLE_PRIVOXY defined as 'no' 2020-03-31 09:50:20.341533 [info] ENABLE_AUTODL_IRSSI defined as 'no' 2020-03-31 09:50:20.368737 [info] ENABLE_RPC2 defined as 'yes' 2020-03-31 09:50:20.393193 [info] ENABLE_RPC2_AUTH defined as 'yes' 2020-03-31 09:50:20.417318 [info] RPC2_USER defined as 'admin' 2020-03-31 09:50:20.441489 [info] RPC2_PASS defined as 'bangarang' 2020-03-31 09:50:20.465158 [info] ENABLE_WEBUI_AUTH defined as 'yes' 2020-03-31 09:50:20.489215 [info] WEBUI_USER defined as 'admin' 2020-03-31 09:50:20.513545 [info] WEBUI_PASS defined as 'bangarang' 2020-03-31 09:50:20.541256 [info] Deleting files in /tmp (non recursive)... 2020-03-31 09:50:20.568077 [info] Starting Supervisor... 2020-03-31 09:50:20,706 INFO Included extra file "/etc/supervisor/conf.d/rtorrent.conf" during parsing 2020-03-31 09:50:20,707 INFO Set uid to user 0 succeeded 2020-03-31 09:50:20,709 INFO supervisord started with pid 6 2020-03-31 09:50:21,711 INFO spawned: 'logrotate-script' with pid 191 2020-03-31 09:50:21,712 INFO spawned: 'pyrocore-script' with pid 192 2020-03-31 09:50:21,714 INFO spawned: 'rutorrent-script' with pid 193 2020-03-31 09:50:21,716 INFO spawned: 'start-script' with pid 194 2020-03-31 09:50:21,718 INFO spawned: 'watchdog-script' with pid 195 2020-03-31 09:50:21,718 INFO reaped unknown pid 7 2020-03-31 09:50:21,726 DEBG 'start-script' stdout output: [info] VPN is enabled, beginning configuration of VPN 2020-03-31 09:50:21,726 INFO success: logrotate-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2020-03-31 09:50:21,726 INFO success: pyrocore-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2020-03-31 09:50:21,727 INFO success: rutorrent-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2020-03-31 09:50:21,727 INFO success: start-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2020-03-31 09:50:21,727 INFO success: watchdog-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2020-03-31 09:50:21,736 DEBG 'watchdog-script' stdout output: [info] rTorrent config file already exists, skipping copy 2020-03-31 09:50:21,762 DEBG 'start-script' stdout output: [warn] Password contains characters which could cause authentication issues, please consider changing this if possible 2020-03-31 09:50:21,831 DEBG 'start-script' stdout output: [info] Default route for container is 172.17.0.1 2020-03-31 09:50:21,839 DEBG 'start-script' stdout output: [info] Adding 209.222.18.222 to /etc/resolv.conf 2020-03-31 09:50:21,849 DEBG 'start-script' stdout output: [info] Adding 84.200.69.80 to /etc/resolv.conf 2020-03-31 09:50:21,859 DEBG 'start-script' stdout output: [info] Adding 37.235.1.174 to /etc/resolv.conf 2020-03-31 09:50:21,863 DEBG 'start-script' stdout output: [info] Adding 1.1.1.1 to /etc/resolv.conf 2020-03-31 09:50:21,869 DEBG 'start-script' stdout output: [info] Adding 209.222.18.218 to /etc/resolv.conf 2020-03-31 09:50:21,872 DEBG 'start-script' stdout output: [info] Adding 37.235.1.177 to /etc/resolv.conf 2020-03-31 09:50:21,876 DEBG 'start-script' stdout output: [info] Adding 84.200.70.40 to /etc/resolv.conf 2020-03-31 09:50:21,879 DEBG 'start-script' stdout output: [info] Adding 1.0.0.1 to /etc/resolv.conf 2020-03-31 09:50:21,943 DEBG fd 11 closed, stopped monitoring <POutputDispatcher at 23367280801824 for <Subprocess at 23367280801152 with name pyrocore-script in state RUNNING> (stdout)> 2020-03-31 09:50:21,943 DEBG fd 15 closed, stopped monitoring <POutputDispatcher at 23367280247232 for <Subprocess at 23367280801152 with name pyrocore-script in state RUNNING> (stderr)> 2020-03-31 09:50:21,944 INFO exited: pyrocore-script (exit status 0; expected) 2020-03-31 09:50:21,944 DEBG received SIGCHLD indicating a child quit 2020-03-31 09:50:22,029 DEBG 'start-script' stdout output: [info] Attempting to load iptable_mangle module... 2020-03-31 09:50:22,030 DEBG 'start-script' stderr output: modprobe: FATAL: Module iptable_mangle not found in directory /lib/modules/4.19.107-Unraid 2020-03-31 09:50:22,030 DEBG 'start-script' stdout output: [warn] Unable to load iptable_mangle module using modprobe, trying insmod... 2020-03-31 09:50:22,031 DEBG 'start-script' stderr output: insmod: ERROR: could not load module /lib/modules/iptable_mangle.ko: No such file or directory 2020-03-31 09:50:22,031 DEBG 'start-script' stdout output: [warn] Unable to load iptable_mangle module, you will not be able to connect to the applications Web UI or Privoxy outside of your LAN [info] unRAID/Ubuntu users: Please attempt to load the module by executing the following on your host: '/sbin/modprobe iptable_mangle' [info] Synology users: Please attempt to load the module by executing the following on your host: 'insmod /lib/modules/iptable_mangle.ko' 2020-03-31 09:50:22,046 DEBG 'start-script' stdout output: [info] Docker network defined as 172.17.0.0/16 2020-03-31 09:50:22,049 DEBG 'start-script' stdout output: [info] Adding 192.168.1.0/24 as route via docker eth0 2020-03-31 09:50:22,050 DEBG 'start-script' stdout output: [info] ip route defined as follows... -------------------- 2020-03-31 09:50:22,050 DEBG 'start-script' stdout output: default via 172.17.0.1 dev eth0 172.17.0.0/16 dev eth0 proto kernel scope link src 172.17.0.3 192.168.1.0/24 via 172.17.0.1 dev eth0 2020-03-31 09:50:22,051 DEBG 'start-script' stdout output: -------------------- 2020-03-31 09:50:22,087 DEBG 'start-script' stdout output: [info] iptables defined as follows... -------------------- 2020-03-31 09:50:22,088 DEBG 'start-script' stdout output: -P INPUT DROP -P FORWARD DROP -P OUTPUT DROP -A INPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT -A INPUT -i eth0 -p udp -m udp --sport 1198 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 9080 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --sport 9080 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 9443 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --sport 9443 -j ACCEPT -A INPUT -s 192.168.1.0/24 -i eth0 -p tcp -m tcp --dport 5000 -j ACCEPT -A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -i tun0 -j ACCEPT -A OUTPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT -A OUTPUT -o eth0 -p udp -m udp --dport 1198 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --dport 9080 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --sport 9080 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --dport 9443 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --sport 9443 -j ACCEPT -A OUTPUT -d 192.168.1.0/24 -o eth0 -p tcp -m tcp --sport 5000 -j ACCEPT -A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT -A OUTPUT -o lo -j ACCEPT -A OUTPUT -o tun0 -j ACCEPT 2020-03-31 09:50:22,089 DEBG 'start-script' stdout output: -------------------- 2020-03-31 09:50:22,089 DEBG 'start-script' stdout output: [info] Starting OpenVPN... 2020-03-31 09:50:22,095 DEBG 'start-script' stdout output: Tue Mar 31 09:50:22 2020 WARNING: file 'credentials.conf' is group or others accessible Tue Mar 31 09:50:22 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020 Tue Mar 31 09:50:22 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10 2020-03-31 09:50:22,096 DEBG 'start-script' stdout output: Tue Mar 31 09:50:22 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts 2020-03-31 09:50:22,096 DEBG 'start-script' stdout output: [info] OpenVPN started 2020-03-31 09:50:22,097 DEBG 'start-script' stdout output: Tue Mar 31 09:50:22 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]199.229.249.133:1198 Tue Mar 31 09:50:22 2020 UDP link local: (not bound) Tue Mar 31 09:50:22 2020 UDP link remote: [AF_INET]199.229.249.133:1198 2020-03-31 09:50:22,174 DEBG 'start-script' stdout output: Tue Mar 31 09:50:22 2020 [1efa38b575bce4902f9b13da368c8624] Peer Connection Initiated with [AF_INET]199.229.249.133:1198 2020-03-31 09:50:22,029 DEBG 'start-script' stdout output: [info] Attempting to load iptable_mangle module... 2020-03-31 09:50:22,030 DEBG 'start-script' stderr output: modprobe: FATAL: Module iptable_mangle not found in directory /lib/modules/4.19.107-Unraid 2020-03-31 09:50:22,030 DEBG 'start-script' stdout output: [warn] Unable to load iptable_mangle module using modprobe, trying insmod... 2020-03-31 09:50:22,031 DEBG 'start-script' stderr output: insmod: ERROR: could not load module /lib/modules/iptable_mangle.ko: No such file or directory 2020-03-31 09:50:22,031 DEBG 'start-script' stdout output: [warn] Unable to load iptable_mangle module, you will not be able to connect to the applications Web UI or Privoxy outside of your LAN [info] unRAID/Ubuntu users: Please attempt to load the module by executing the following on your host: '/sbin/modprobe iptable_mangle' [info] Synology users: Please attempt to load the module by executing the following on your host: 'insmod /lib/modules/iptable_mangle.ko' 2020-03-31 09:50:22,046 DEBG 'start-script' stdout output: [info] Docker network defined as 172.17.0.0/16 2020-03-31 09:50:22,049 DEBG 'start-script' stdout output: [info] Adding 192.168.1.0/24 as route via docker eth0 2020-03-31 09:50:22,050 DEBG 'start-script' stdout output: [info] ip route defined as follows... -------------------- 2020-03-31 09:50:22,050 DEBG 'start-script' stdout output: default via 172.17.0.1 dev eth0 172.17.0.0/16 dev eth0 proto kernel scope link src 172.17.0.3 192.168.1.0/24 via 172.17.0.1 dev eth0 2020-03-31 09:50:22,051 DEBG 'start-script' stdout output: -------------------- 2020-03-31 09:50:22,087 DEBG 'start-script' stdout output: [info] iptables defined as follows... -------------------- 2020-03-31 09:50:22,088 DEBG 'start-script' stdout output: -P INPUT DROP -P FORWARD DROP -P OUTPUT DROP -A INPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT -A INPUT -i eth0 -p udp -m udp --sport 1198 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 9080 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --sport 9080 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 9443 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --sport 9443 -j ACCEPT -A INPUT -s 192.168.1.0/24 -i eth0 -p tcp -m tcp --dport 5000 -j ACCEPT -A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -i tun0 -j ACCEPT -A OUTPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT -A OUTPUT -o eth0 -p udp -m udp --dport 1198 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --dport 9080 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --sport 9080 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --dport 9443 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --sport 9443 -j ACCEPT -A OUTPUT -d 192.168.1.0/24 -o eth0 -p tcp -m tcp --sport 5000 -j ACCEPT -A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT -A OUTPUT -o lo -j ACCEPT -A OUTPUT -o tun0 -j ACCEPT 2020-03-31 09:50:22,089 DEBG 'start-script' stdout output: -------------------- 2020-03-31 09:50:22,089 DEBG 'start-script' stdout output: [info] Starting OpenVPN... 2020-03-31 09:50:22,095 DEBG 'start-script' stdout output: Tue Mar 31 09:50:22 2020 WARNING: file 'credentials.conf' is group or others accessible Tue Mar 31 09:50:22 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020 Tue Mar 31 09:50:22 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10 2020-03-31 09:50:22,096 DEBG 'start-script' stdout output: Tue Mar 31 09:50:22 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts 2020-03-31 09:50:22,096 DEBG 'start-script' stdout output: [info] OpenVPN started 2020-03-31 09:50:22,097 DEBG 'start-script' stdout output: Tue Mar 31 09:50:22 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]199.229.249.133:1198 Tue Mar 31 09:50:22 2020 UDP link local: (not bound) Tue Mar 31 09:50:22 2020 UDP link remote: [AF_INET]199.229.249.133:1198 2020-03-31 09:50:22,174 DEBG 'start-script' stdout output: Tue Mar 31 09:50:22 2020 [1efa38b575bce4902f9b13da368c8624] Peer Connection Initiated with [AF_INET]199.229.249.133:1198 2020-03-31 09:50:28,456 DEBG 'start-script' stdout output: Tue Mar 31 09:50:28 2020 TUN/TAP device tun0 opened Tue Mar 31 09:50:28 2020 /usr/bin/ip link set dev tun0 up mtu 1500 2020-03-31 09:50:28,458 DEBG 'start-script' stdout output: Tue Mar 31 09:50:28 2020 /usr/bin/ip addr add dev tun0 local 10.13.11.10 peer 10.13.11.9 2020-03-31 09:50:28,459 DEBG 'start-script' stdout output: Tue Mar 31 09:50:28 2020 /root/openvpnup.sh tun0 1500 1558 10.13.11.10 10.13.11.9 init 2020-03-31 09:50:28,466 DEBG 'start-script' stdout output: Tue Mar 31 09:50:28 2020 Initialization Sequence Completed 2020-03-31 09:50:28,579 DEBG 'start-script' stdout output: [info] Port forwarding is not enabled 2020-03-31 09:50:28,579 DEBG 'start-script' stdout output: [info] Checking we can resolve name 'www.google.com' to address... 2020-03-31 09:50:28,693 DEBG 'start-script' stdout output: [info] DNS operational, we can resolve name 'www.google.com' to address '172.217.22.36' 2020-03-31 09:50:28,695 DEBG 'start-script' stdout output: [info] Attempting to get external IP using Name Server 'ns1.google.com'... 2020-03-31 09:50:28,872 DEBG 'start-script' stdout output: [info] Successfully retrieved external IP address 199.229.249.133 2020-03-31 09:50:28,958 DEBG 'watchdog-script' stdout output: [info] rTorrent listening interface IP 0.0.0.0 and VPN provider IP 10.13.11.10 different, marking for reconfigure 2020-03-31 09:50:28,961 DEBG 'watchdog-script' stdout output: [info] rTorrent not running 2020-03-31 09:50:28,962 DEBG 'watchdog-script' stdout output: [info] Removing any rTorrent session lock files left over from the previous run... 2020-03-31 09:50:28,963 DEBG 'watchdog-script' stdout output: [info] Attempting to start rTorrent... 2020-03-31 09:50:28,964 DEBG 'watchdog-script' stdout output: Script started, output log file is '/home/nobody/typescript'. 2020-03-31 09:50:28,985 DEBG 'watchdog-script' stdout output: Script done. 2020-03-31 09:50:29,098 DEBG 'rutorrent-script' stdout output: [info] rtorrent started, setting up rutorrent... 2020-03-31 09:50:29,099 DEBG 'rutorrent-script' stdout output: [info] Setting PHP timezone to UTC... 2020-03-31 09:50:29,102 DEBG 'rutorrent-script' stdout output: [info] nginx cert files already exists, skipping copy 2020-03-31 09:50:29,103 DEBG 'rutorrent-script' stdout output: [info] nginx config file already exists, skipping copy 2020-03-31 09:50:29,104 DEBG 'rutorrent-script' stdout output: [info] rutorrent conf folder already exists, skipping copy 2020-03-31 09:50:29,106 DEBG 'rutorrent-script' stdout output: "python" => '/usr/bin/python', // Something like /usr/bin/python. If empty, will be found in PATH. 2020-03-31 09:50:29,113 DEBG 'rutorrent-script' stdout output: [info] running rsync to copy rutorrent user plugins to the plugins folder inside the container... 2020-03-31 09:50:29,114 DEBG 'rutorrent-script' stderr output: This rsync lacks old-style --compress due to its external zlib. Try -zz. Continuing without compression. 2020-03-31 09:50:29,116 DEBG 'rutorrent-script' stdout output: sending incremental file list 2020-03-31 09:50:29,117 DEBG 'rutorrent-script' stdout output: README.txt 2020-03-31 09:50:29,117 DEBG 'rutorrent-script' stdout output: theme/themes/README.txt 2020-03-31 09:50:29,118 DEBG 'rutorrent-script' stdout output: sent 494 bytes received 64 bytes 1.12K bytes/sec total size is 237 speedup is 0.42 2020-03-31 09:50:29,119 DEBG 'rutorrent-script' stdout output: [info] rutorrent share folder already exists, skipping copy 2020-03-31 09:50:29,120 DEBG 'rutorrent-script' stdout output: [info] nginx /rpc2 location enabled 2020-03-31 09:50:29,127 DEBG 'rutorrent-script' stdout output: [info] Updating password for rpc2 account 'admin'... 2020-03-31 09:50:29,128 DEBG 'rutorrent-script' stderr output: 2020-03-31 09:50:29,128 DEBG 'rutorrent-script' stderr output: password for user admin 2020-03-31 09:50:29,135 DEBG 'rutorrent-script' stdout output: [info] Updating password for web ui account 'admin'... 2020-03-31 09:50:29,137 DEBG 'rutorrent-script' stderr output: 2020-03-31 09:50:29,137 DEBG 'rutorrent-script' stderr output: password for user admin 2020-03-31 09:50:29,137 DEBG 'rutorrent-script' stdout output: [info] starting php-fpm... 2020-03-31 09:50:29,169 DEBG 'rutorrent-script' stderr output: [NOTICE] [pool www] 'user' directive is ignored when FPM is not running as root [NOTICE] [pool www] 'group' directive is ignored when FPM is not running as root 2020-03-31 09:50:29,173 DEBG 'rutorrent-script' stdout output: [info] starting nginx... 2020-03-31 09:50:29,995 DEBG 'watchdog-script' stdout output: [info] rTorrent process started [info] Waiting for rTorrent process to start listening on port 5000... 2020-03-31 09:50:30,002 DEBG 'watchdog-script' stdout output: [info] rTorrent process listening on port 5000 [info] Initialising ruTorrent plugins (checking rTorrent is running)... 2020-03-31 09:50:30,007 DEBG 'watchdog-script' stdout output: [info] rTorrent running [info] Initialising ruTorrent plugins (checking nginx is running)... 2020-03-31 09:50:30,013 DEBG 'watchdog-script' stdout output: [info] nginx running [info] Initialising ruTorrent plugins... 2020-03-31 09:50:30,103 DEBG 'watchdog-script' stdout output: 2020-03-31 09:50:30,135 DEBG 'watchdog-script' stdout output: [info] ruTorrent plugins initialised 2020-03-31 09:50:30,002 DEBG 'watchdog-script' stdout output: [info] rTorrent process listening on port 5000 [info] Initialising ruTorrent plugins (checking rTorrent is running)... 2020-03-31 09:50:30,007 DEBG 'watchdog-script' stdout output: [info] rTorrent running [info] Initialising ruTorrent plugins (checking nginx is running)... 2020-03-31 09:50:30,013 DEBG 'watchdog-script' stdout output: [info] nginx running [info] Initialising ruTorrent plugins... 2020-03-31 09:50:30,103 DEBG 'watchdog-script' stdout output: 2020-03-31 09:50:30,135 DEBG 'watchdog-script' stdout output: [info] ruTorrent plugins initialised

I moved the "data" mapping in the docker settings. I changed it from "/mnt/user/Media/Downloads" to "/mnt/user/Media/". Which obviously broke all of my file mappings for the torrents. So i then clicked on them, hit "save to" and set the original folder the files got saved to. Then hit "force recheck", but it didn't recognize any of the files. I can still see them in my file system, but once I moved the data, it corrupted those files and I can no longer play them, until I redownload the entire thing. A similar thing happened when I first switched from Deluge to r-torrent and tried to import all of my old torrents from that program.

Another new issue I am having, is I recently enabled VPN, and it looks like it's connecting fine, but the web UI is now broken. I can't load any torrent views, and on launch i get the following errors in the rTorrent log: [25.03.2020 15:27:02] WebUI started. [25.03.2020 15:27:23] Bad response from server: (0 [error,getplugins]) then if I try and click any torrent view tab, it returns the following error: [25.03.2020 15:30:16] JS error: [http://[ipaddress]/js/stable.js : 1770] TypeError: this.dBody is undefined

Hey all, I recently moved my "data" folder, and it deleted/modified all of my active torrents where I have to re-download gigabytes of data. Why is this and how can I avoid this happening in the future? I switched from Deluge to rtorrent and I had to re-download all of my previously fully downloaded torrents as well.

Hey All, I'm randomly losing connection to my unraid server. Also to my plex server that is running on it. Even when I'm connected to it through the GUI, it randomly becomes unresponsive. Currently my server is connected directly to my router, via two ethernet cables connected in bridge mode.

So I ended up installing the new BMC update last night and in that process revered all of the BMC settings to default. Then, through the supermicro IPMI interface, changed my fan mode to "optimal". I'm not sure if this works dynamically with the IPMI tool yet because I haven't hit any temperature marks for them to switch yet, but at least my CPU fan isn't on full blast anymore.

OK I will ensure both are up to date, and check back. Thank you again for the help. So the case fans (which weren't an issue) are actually non-pwm fans, that were all running about 1200 RPM. If I end up going that route, is moving my CPU fan from FANA to FAN1 (which is the same group as the rest) going to adversely affect things? Ideally I'd throw my old low RPM PWM fans back in but I had issues getting them to behave before which is why I swapped them out.