jsgilly20

Hey, Sorry this might be a real dumb question but I don't do a lot of minecraft servers - I'm doing my best for my daughter who loves it! She wants to play Pixelmon so I've added your container, the server seems to only launch and run version 8.3.6 but she wants to play on a newer one "9.1.7". I can see it in the list of version tags - but how do I setup the server to run on this version, I've not seen where I can input a version etc. We tested it by matching the version of curseforge to 8.3.6 and it let us on so the server runs but we can a mod error if we try to connect with 9.1.7. Thank you.

Ok so now it's working! Rolling back by itself didn't fix it, carried on with the same problem. A mixture of NAS firmware changes, disabling WSB in SMB settings - I don't actually know how if this used to be disabled prior but it was currently enabled, maybe this changed with 6.10? I then cycled the array down and a server and NAS reboot or two and we were able to successfully mount again. For tonight I'm going to leave it working, when I have time I'll go through the upgrade to 6.10 again and properly track any changes to SMB settings etc. Thanks very much for your help on it today, much appreciated!

Unraid version 9.2 and I'm not sure on UD version but it was always kept up to date. Sorry that's not much help.

They were working as recent as 2 days ago, may have been sooner but i've not accessed anything on them more recently. I'm on 6.10.0 Unraid and 2022.05.19 of UD. If I had to hedge a bet, I think they were atleast working before I upgraded to 6.10.0 and the most recent updates to UD. I'll turn mover logging off - thanks for the note! Unfortunately buying a new NAS enclosure isn't an option for me at the moment, I'll see if there's any custom firmware for my NAS that can bring it up to date with SMB 3 and try that approach to fix in the mean time.

Attached, Thanks! jarvis-diagnostics-20220520-1644.zip

Thanks for the swift reply, unfortunately I already have that option enabled within SMB settings, I've also just restarted the array and saved these settings again and tried again and still no luck.

Hey, After my server updated to latest version of Unraid and UD my 2 NAS drives that I had mounted previously no longer mount. I believe this is because the NAS bay is pretty old (and no longer supported as of 2018) and it's SMB version is old. I'm getting the following errors in the system logs when attempting to mount: May 20 17:07:50 Jarvis kernel: CIFS: Attempting to mount \\HULK\Volume_1 May 20 17:07:50 Jarvis kernel: CIFS: VFS: cifs_mount failed w/return code = -112 May 20 17:07:50 Jarvis unassigned.devices: SMB default protocol mount failed: 'mount error: Server abruptly closed the connection. This can happen if the server does not support the SMB version you are trying to use. The default SMB version recently changed from SMB1 to SMB2.1 and above. Try mounting with vers=1.0. mount error(112): Host is down Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) and kernel log messages (dmesg) '. May 20 17:07:50 Jarvis unassigned.devices: Mount SMB share '//HULK/Volume_1' using SMB 3.1.1 protocol. May 20 17:07:50 Jarvis unassigned.devices: Mount SMB command: /sbin/mount -t cifs -o rw,noserverino,nounix,iocharset=utf8,file_mode=0777,dir_mode=0777,uid=99,gid=100,vers=3.1.1,credentials='/tmp/unassigned.devices/credentials_Volume_1' '//HULK/Volume_1' '/mnt/remotes/HULK_Volume_1' Now my problem is, I have no clue where I can change the SMB version. Earlier posts say there's a force version option in UD settings but that seems to have gone in recent updates. Anyone have any help on how to action what the log is suggesting? Thank you.

Enabling the "Advanced View" while on the settings page for the container will show extra fields - one of them is a webui. Though I'm still having no luck with it - it's not finding any shows, feels like it's looking in some empty / corrupt cache file but I'm unable to update it anyway.

2018-05-22 00:02:02.631770 [info] Host is running unRAID 2018-05-22 00:02:02.658620 [info] System information Linux a688bad27742 4.14.13-unRAID #1 SMP PREEMPT Wed Jan 10 10:27:09 PST 2018 x86_64 GNU/Linux 2018-05-22 00:02:02.689540 [info] PUID defined as '99' 2018-05-22 00:02:02.745266 [info] PGID defined as '100' 2018-05-22 00:02:02.791009 [info] UMASK defined as '000' 2018-05-22 00:02:02.819165 [info] Permissions already set for volume mappings 2018-05-22 00:02:02.849321 [info] Starting Supervisor... 2018-05-22 00:02:03,022 INFO Included extra file "/etc/supervisor/conf.d/get-iplayer.conf" during parsing 2018-05-22 00:02:03,023 INFO Set uid to user 0 succeeded 2018-05-22 00:02:03,026 INFO supervisord started with pid 7 2018-05-22 00:02:04,028 INFO spawned: 'get-iplayer' with pid 45 2018-05-22 00:02:04,029 INFO reaped unknown pid 8 2018-05-22 00:02:04,040 DEBG 'get-iplayer' stdout output: [info] TV shows defined as Eastenders 2018-05-22 00:02:04,040 INFO success: get-iplayer entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2018-05-22 00:02:04,047 DEBG 'get-iplayer' stdout output: [info] Processing show Eastenders... [info] Delete partial downloads from incomplete folder... 2018-05-22 00:02:04,051 DEBG 'get-iplayer' stdout output: [info] Running get_iplayer... 2018-05-22 00:02:04,310 DEBG 'get-iplayer' stdout output: get_iplayer v3.14, Copyright (C) 2008-2010 Phil Lewis This program comes with ABSOLUTELY NO WARRANTY; for details use --warranty. This is free software, and you are welcome to redistribute it under certain conditions; use --conditions for details. 2018-05-22 00:02:04,310 DEBG 'get-iplayer' stdout output: 2018-05-22 00:02:04,311 DEBG 'get-iplayer' stdout output: WARNING: Please download and run latest installer or install the Mojolicious Perl module for concurrent indexing of tv programmes. 2018-05-22 00:02:04,312 DEBG 'get-iplayer' stdout output: INFO: Added 0 tv programmes to cache 2018-05-22 00:02:04,313 DEBG 'get-iplayer' stdout output: INFO: 0 matching programmes 2018-05-22 00:02:04,318 DEBG 'get-iplayer' stdout output: [info] Env var SCHEDULE defined, sleeping for 1m... 2018-05-22 00:03:04,325 DEBG 'get-iplayer' stdout output: [info] Processing show Eastenders... [info] Delete partial downloads from incomplete folder... 2018-05-22 00:03:04,328 DEBG 'get-iplayer' stdout output: [info] Running get_iplayer... 2018-05-22 00:03:04,527 DEBG 'get-iplayer' stdout output: get_iplayer v3.14, Copyright (C) 2008-2010 Phil Lewis This program comes with ABSOLUTELY NO WARRANTY; for details use --warranty. This is free software, and you are welcome to redistribute it under certain conditions; use --conditions for details. 2018-05-22 00:03:04,528 DEBG 'get-iplayer' stdout output: 2018-05-22 00:03:04,528 DEBG 'get-iplayer' stdout output: WARNING: Please download and run latest installer or install the Mojolicious Perl module for concurrent indexing of tv programmes. I'm running into issues getting this docker started - posted is my log. Not sure on how I need to get the Mojolicious Perl Module installed on an Unraid build though... No luck either with setting up the webui - any tips on how I might be doing that wrong would be helpful too. I set it to http://192.168.2.100:8185 which is the IP of the host and I pass the port from the host to the container with an extra port config. Thanks!