b0mb

The Server I'm connecting to its hosted by my brother so I don't use a local card reader. The containers are running in bridged mode as I'm not able to connect from a container running in bridged mode to a container with a fix ip. I've tried that but didn't get it working. Gesendet von meinem Redmi Note 3 mit Tapatalk

Hi, I'm using the Oscam and the Tvheadend container from linuxserver.io on my unraid server. I'm running the latest builds and unRAID is also the latest build 6.5.0 RC5. My problem is that the Ecm times using the containers with unRAID are about 400 ms and sometimes causing glitches. This same config on openmediavault is running with Ecm times about 100ms. The ping to my unraid server in the local network is 1ms. Using Oscam on my Vu+ receiver is also running with normal Ecm times. Does any1 have an idea what I could try to solve my problem? Thx in advance b0mb Gesendet von meinem Redmi Note 3 mit Tapatalk

Just updated to latest container and everything is working again. Thx a lot Gesendet von meinem Redmi Note 3 mit Tapatalk

I have exactly the same error since update to 6.4 - before everything was running fine. I don´t have any special character in my domain

Post in Emby forum. There is a thread for netcore version in the testing area. Gesendet von meinem Redmi Note 3 mit Tapatalk

You have to deactivate port mapping and try changing emby port to 8888 Gesendet von meinem Redmi Note 3 mit Tapatalk

Yes... And than add the device in Emby backend where you configure transcoding... And you have to add some variable to the container so that emby can access /dev/dri as a user group video. That's explained in the docker hub of the netcore container Gesendet von meinem Redmi Note 3 mit Tapatalk

Actually only VAAPI transcoding works but very well. You can use the old config directory but it's recommended to deactivate port mapping in Emby backend to prevent crashing on some celeron and Pentium cpus. Gesendet von meinem Redmi Note 3 mit Tapatalk

The new netcore container doesn't using unraid with a G4560 or J3455 CPU. HW transcoding looks very good. Gesendet von meinem Redmi Note 3 mit Tapatalk

It's really wicked... I'm using exact the same config like I did on OMV. Switched to SAB now where speed is maxed out. Dunno what might be the reason for the problems with Nzbget.... Gesendet von meinem Redmi Note 3 mit Tapatalk

Hi! I just came back again from OMV to unRAID. I have a 400 MBiT Cableline and with unRAID i get about 40 - 45 MB/S where on OMV i had 49 - 50 MB with the same settings (also used this container there) I tried Sabnzbd on unRAID where i do also have FULLSPEED @ 50 MB/S. Downloads are going on an Samsung SSD as cachedrive which is btrfs formatted. Does any1 have an idea? Thx in advance! b0mb

btw. this is how it´s locking inside the plex container... root@twilightzone:/# vainfo error: XDG_RUNTIME_DIR not set in the environment. error: can't connect to X server! libva info: VA-API version 0.39.0 libva info: va_getDriverName() returns 0 libva info: Trying to open /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so libva info: Found init function __vaDriverInit_0_39 libva info: va_openDriver() returns 0 vainfo: VA-API version: 0.39 (libva 1.7.0) vainfo: Driver version: Intel i965 driver for Intel(R) Broxton - 1.7.0 vainfo: Supported profile and entrypoints VAProfileMPEG2Simple : VAEntrypointVLD VAProfileMPEG2Main : VAEntrypointVLD VAProfileH264ConstrainedBaseline: VAEntrypointVLD VAProfileH264ConstrainedBaseline: VAEntrypointEncSlice VAProfileH264Main : VAEntrypointVLD VAProfileH264Main : VAEntrypointEncSlice VAProfileH264High : VAEntrypointVLD VAProfileH264High : VAEntrypointEncSlice VAProfileH264MultiviewHigh : VAEntrypointVLD VAProfileH264MultiviewHigh : VAEntrypointEncSlice VAProfileH264StereoHigh : VAEntrypointVLD VAProfileH264StereoHigh : VAEntrypointEncSlice VAProfileVC1Simple : VAEntrypointVLD VAProfileVC1Main : VAEntrypointVLD VAProfileVC1Advanced : VAEntrypointVLD VAProfileNone : VAEntrypointVideoProc VAProfileJPEGBaseline : VAEntrypointVLD VAProfileJPEGBaseline : VAEntrypointEncPicture VAProfileVP8Version0_3 : VAEntrypointVLD VAProfileVP8Version0_3 : VAEntrypointEncSlice VAProfileHEVCMain : VAEntrypointVLD VAProfileHEVCMain : VAEntrypointEncSlice VAProfileHEVCMain10 : VAEntrypointVLD VAProfileVP9Profile0 : VAEntrypointVLD so i guess it should work but i can´t test as i don´t have a plex pass...

Module Size Used by i915 909208 1 fbcon 33164 71 bitblit 4361 1 fbcon fbcon_rotate 1964 1 bitblit fbcon_ccw 4678 1 fbcon_rotate fbcon_ud 4805 1 fbcon_rotate fbcon_cw 4606 1 fbcon_rotate softcursor 1341 4 fbcon_ud,fbcon_cw,fbcon_ccw,bitblit font 7588 1 fbcon i2c_algo_bit 4752 1 i915 drm_kms_helper 86945 1 i915 cfbfillrect 3306 1 drm_kms_helper cfbimgblt 2047 1 drm_kms_helper cfbcopyarea 3006 1 drm_kms_helper drm 221592 3 i915,drm_kms_helper intel_gtt 10996 1 i915 agpgart 21314 2 intel_gtt,drm syscopyarea 2942 1 drm_kms_helper sysfillrect 3178 1 drm_kms_helper sysimgblt 2047 1 drm_kms_helper fb_sys_fops 1378 1 drm_kms_helper fb 29760 8 fbcon_ud,fbcon_cw,fbcon_ccw,bitblit,softcursor,i 915,fbcon,drm_kms_helper fbdev 1030 2 fb,fbcon xt_CHECKSUM 1335 1 iptable_mangle 1658 1 ipt_REJECT 1521 2 nf_reject_ipv4 2483 1 ipt_REJECT ebtable_filter 1903 0 ebtables 14552 1 ebtable_filter vhost_net 9091 0 tun 19304 2 vhost_net vhost 19681 1 vhost_net macvtap 11622 1 vhost_net macvlan 12389 1 macvtap xt_nat 1913 11 veth 4966 0 ipt_MASQUERADE 1277 15 nf_nat_masquerade_ipv4 1865 1 ipt_MASQUERADE iptable_nat 1897 1 nf_conntrack_ipv4 5874 3 nf_nat_ipv4 4199 1 iptable_nat iptable_filter 1706 2 ip_tables 9853 3 iptable_mangle,iptable_filter,iptable_nat nf_nat 11145 3 xt_nat,nf_nat_masquerade_ipv4,nf_nat_ipv4 md_mod 36572 4 bonding 92464 0 x86_pkg_temp_thermal 4669 0 coretemp 5340 0 kvm_intel 160423 0 kvm 289582 1 kvm_intel i2c_i801 11888 0 i2c_smbus 3041 1 i2c_i801 i2c_core 20390 6 i2c_algo_bit,i2c_i801,i2c_smbus,i915,drm_kms_hel per,drm r8169 58718 0 ahci 26326 4 mii 3587 1 r8169 libahci 19716 1 ahci video 27138 1 i915 backlight 5833 2 video,i915 my CPU is a j3455

So does any1 have VAAPI HW decoding to get running with the Emby Container?

You have to wake the server sending a magic packet.... WOL in your bios should also be activated [emoji6] Gesendet von meinem Redmi Note 3 mit Tapatalk

you might be right

Got it working now Port 443 was in use fore remote service of my router... changed the port now and forwarded 443 to the unraid server

The XXX was just a placeholder ... The domain it's listed on the site you've posted Gesendet von meinem Redmi Note 3 mit Tapatalk

Hi! I´m trying to use this nice container but it kills itself because of an error right after start Failed authorization procedure. xxx.4irc.com (tls-sni-01): urn:acme:error:unauthorized :: The client lacks sufficient authorization :: Incorrect validation certificate for tls-sni-01 challenge. Requested Does any1 have a tipp for me? I´ve entered "4irc.com" in the domain field of the template and xxx into the subdomain field. I´ve also set only subdomains to true. Thx! b0mb

Thx! Download is working now [emoji6] Gesendet von meinem Redmi Note 3 mit Tapatalk

Still no update here seen... Does it take some time to appear? :-) Gesendet von meinem Redmi Note 3 mit Tapatalk

Hi! I just installed the latest docker container on unRAID 6.3.3 When i enter my name etc in the web interface of tonido i get the following any idea? Usually none of my container does have a problem with connection to the internet. Thx! b0mb

I guess so - manually spin down fixes the problem. Any idea for a perm solution? Gesendet von meinem Redmi Note 3 mit Tapatalk

Yes! It´s part of the array but it´s no data written to it yet Just woke my server from S3 May 2 20:41:48 twilightzone s3_sleep: Disk activity on going: sdc May 2 20:41:48 twilightzone s3_sleep: Disk activity detected. Reset timers. May 2 20:42:48 twilightzone s3_sleep: Disk activity on going: sdc May 2 20:42:48 twilightzone s3_sleep: Disk activity detected. Reset timers. All drives of my Array are shown as spundown....hmmmm

Not SSD - SDD [emoji6] Cache drive is indeed a SSD and already excluded... Gesendet von meinem Redmi Note 3 mit Tapatalk