Kind of reviving an old topic but not sure if anything has changed in the past few years...
I need to run sudo sed -i 's/curl -s/curl --compressed -s/' /opt/pihole/gravity.sh every time my Pihole container starts
Could use some help -
Since Pihole still doesn't nativly allow compressed lists I need to run a sudo command after each restart.
But as a Linux infant I have no idea how to inject - sudo sed -i 's/curl -s/curl --compressed -s/' /opt/pihole/gravity.sh
here is the drive diagnostic file -
The Main page shows the drive listed has a (high?) number of errors. The other drives have no errors.
I hope its not failing its brand new an I ran a significant preclear on it.
Thanks in advance
WDC_WD80EZZX-11CSGA0_VLKJX5PZ-20180211-1904 disk2 (sdc).txt
I have been looking at an 1800X build.
I haven't had a lot of luck with AMD in the "olden" days and have been strictly Intel for well over a decade.
I have been trolling this thread for a while.
I see various issues but most of those are around VMs which I "assume" will get fixed over time with bios/microcode updates.
I am moving from a Intel i5-2500k setup currently on win10 with the below use case with the exception of deluge and the VM
My use case is:
Plex/Radarr/Sonarr/Nzbget/DelugeVPN w/ Piroxy and possibly 1 Win10 VM (at some point)
My Proposed Plan
Ryzen 1800X
Motherboard still undetermined could use some advice - ATX size
2x16 32GB Ram undetermined brand
cheap video card since I need to be able to see bios (until Plex gets HEVC HW Transcoding working)
Storage I already have
2 WD 8TB HDs (1 is for parity)
1 WD 6TB Red
1 WD 2TB Red
1 Samsung 500GB SSD for Dockers and cache
What else am I missing
My migrations to stick all the drives into the box -
I will keep most all drives on the motherboard if possible. My plan was keep at least SSD, Parity on motherboard and data drives on the Syba until I can replace it.
Drive stategy - preclear 2 of the 8TB drives, migrate stuff over then add in the other drives, preclear them, setup the parity
Thoughts?
As the title says I am moving away from my Win10 box to Unraid
System Specs
Intel DH67BL
Intel i5-2500K
32GB Ram
Syba SD-PEX40104 PCI-Express 8-Port Internal SATA
1 250GB SSD (will be used for VMs/Dockers)
1 - 8TB Parity Drive
2 - 8TB data drives
1 - 6TB Data Drive
1 - 3TB Data Drive
I plan on running Plex, Sonarr, Radarr and nzbget on the box... at some point perhaps a VM but short term not likely
Does anyone see any issues for my move?
Thanks in advance