bigsing

When i've seen this issue in the past it's either a corrupted docker image or the docker image was full. Typically you need to delete and rebuild the docker.img or setup a docker folder instead so it can grow as needed. Here's a good video on it - https://www.youtube.com/watch?v=XbsU1I810bw

Rebuilding now, thank you! I assumed this was the proper process, but was hesitant since I couldn't find the documentation for it.

I have disk that I know is in a good state, but after a reboot is now showing as disabled with contents emulated. In searching the forums to rebuild this disk there are several posts referencing the rebuild on top process with this link (https://docs.unraid.net/unraid-os/manual/storage-management#rebuilding-a-drive-onto-itself). However, that portion of the documentation doesn't appear to exist. Is anyone able to provide those steps in order for me to get my array fixed?

Support thread for all my Docker Templates listed below. Tronbyt Server - https://github.com/tronbyt/server or @bigsing on the Tronybt Discord Joplin Server - https://hub.docker.com/r/joplin/server/ This thread is reserved for issues with the Unraid Docker templates. For issues with an application itself, please redirect your concern to the app's own support channels.

Debug Log ID = 4049a95d-78bf-4065-b6d3-60dc5ed7ac89 Error Message: [12.03.2024 04:01:09][❌][sabnzbd] tar verification failed! Tar said: tar: Removing leading `/' from member names; tar: /mnt/cache/appdata/downloads/inter: Not found in archive; tar: Exiting with failure status due to previous errors I'm not sure why it's expecting to find /mnt/cache/appdata/downloads/inter as I have /mnt/cache/appdata/downloads as an excluded folder I've disabled verification in the interim

I recently ran into this issue and found the resolution here https://github.com/Tautulli/Tautulli/issues/2183. I used DBeaver to connect to the sqlite databse (tautulli.db) in appdata (with the app stopped) and deleted the notfy_log table. The app started cleanly after that.

Is your issue specific to VideoSort or Post Processing scripts in general? For the container to load the scripts your ScriptDir property (found under Settings > Paths) needs to be set to the location the scripts reside. For example my ScriptDir is set to /config/ppscripts which translates to /mnt/user/appdata/nzbget/ppscripts

I fixed this by using the permissions plugin in the config.yaml file. Insure the permissions plugin is listed in the plugins section at the top and include a permissions section further down in the file similar to the below. permissions: file: 666 dir: 777

Done - https://github.com/linuxserver/docker-beets/issues/32

I'm attempting to install the PlexUpdate plugin, but it requires the requests package be installed via pip. I see that the pip packages installed are defined in the dockerfile, could this possibly be added to the dockerfile?

Yep, I meant forward breakout cables. Sent from my Pixel using Tapatalk

I recently purchased a LSI 9201-16i off eBay. I plugged the card into my test bench last night and verified that each SAS port recognizes 4 drives when using a reverse breakout cable. The drives i tested with included 2x250GB, a 1TB HDD, and 1 SSD. I was going to run a parity check as well, but is there any other testing I should do before I consider moving this card from my test bench into my main server? Also the cards BIOS version is 8.00.00.00 would I gain anything from updating this?

Sounds like you've tried everything but a delete of the container and a restart of the server. I had a different issue several weeks ago and I tried everything you did as well and deleteing the container, restarting, and adding the container back was the only solution that worked for me.

Thanks for the quick response! I tried deleting the container and reinstalling but they didn't change anything. I tried firefox instead of chrome and am still having the same issue. I'll try restarting the PC later and if it still fails i'll do the reboot and then remove/reinstall the container again. This is working now after a restart of the server, thanks!

Thanks for the quick response! I tried deleting the container and reinstalling but they didn't change anything. I tried firefox instead of chrome and am still having the same issue. I'll try restarting the PC later and if it still fails i'll do the reboot and then remove/reinstall the container again.

I started experiencing a strange issue today, i had a script i needed to update in my /config share and i saved it forcing the app to restart. Now i can only access nzbget from my reverse proxy and can't through the IP address of my unraid machine to the same port. I didn't see anything of substance in the logs, any ideas where i can start looking for a root cause?

I am having an issue with scheduled tasks not happening at local time. I need to enter scheduled times at GMT. I bet I'll have to go and edit them once we switch to daylight savings time too. Not a big deal, but I didn't have that problem with needo's docker back when I used that. If this is an acknowledged/known issue, please consider listing it in the top post as a known defect. And if you fix this, please make an announcement or update the top post. Thanks! I asked the same question in the previous support thread. There is a setting under the logging section called "TimeCorrection" which will fix the issues with scheduled task timing. Of course, this will need to be modified for daylight savings as well. This workaround was not needed in previous versions of the container and i've been hoping for a fix, but haven't heard anything.

As shown in nterwebtech's first screen shot you will need to create a docker mapping to your plexwatch config. Then when you choose to import your DB in the settings you can reference it's location via the docker mapping.

Just restart the docker and it will update to the latest version

bjp999, i was reviewing the steps you posted on the first page and noticed an error. There is a / missing between /mnt and [dest] in the rsync command. Just thought i'd point it out.

I believe the plugin uses the notification system included with v6. As long as email notifications are setup correctly for your system, you shouldn't have any issues.

Plugin is working great for me as well. Cleared a 3TB and 2 cycles on a 1TB using the fast post read option as well. The email and pushbullet notifications are an awesome feature!

My Helios 910 Case has 3 SS-500's in it. One is the older style, and two are the new style. http://i.imgur.com/LFTOZ.jpg