Brydezen
-
Posts
135 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by Brydezen
-
-
It's pretty hard for me to find the right memory stick. I have no clue how to identity it. The manual only list the slots as DDR3_A1,B1 (...) can I assume A1 is channel 0 and so on? So G1 is channel 7?
-
Yeah it is because of the diagnostics, that I keep on running the test. As only one back module or DIMM has shown up by now. And hoping that it will find the other one before it finishes the test. Don't know if I can do any RMA on a ebay seller, but will contact him/her and hear about what we can work out. But I don't really know what Channel 7 is tbh. My motherboard manual is pretty lose when it comes to the RAM DIMMs.
Well glad I could help some johnnie
-
I had to change a few BIOS settings. So I boot UEFI first and fallback to legacy. I’m running MemTest87 V7.5 on almost the 6th hour by now. Been through “almost” 3 passes now. And both of those said their was a ECC error on Channel 7. But I did also change a setting in the BIOS from auto frequenzy on the ram to lock in 1333 MHz. But I’m pretty sure that would not matter much. As I kept getting the errors in the unraid logs too. - so think I have to message the eBay seller, and ask for a replacement. The are only little under a year old. 😕
-
It has been running for 17 hours and 33 minutes now. The first pass took around 4 - 5 hours. And it says that it’s running at 666 MHz?! It’s only 68% complete on the second pass
-
I have tried downloading the memtest86 from the website. But when I boot the usb i get to use a even older version (4,3) I don’t get a option to use 7.5 for some reason. Maybe the program think my MB is just to old (AsRock EP2C602) 😕
-
Hello @Frank1940 and @John_M I'm running memtest86, from the unraid boot menu. And I just hit the first pass, it did 13 tests to complete one pass. But I have some minor questions; in the Testing line (just above the Pattern) it says 2048M of 64G. I did not increase when it did the first pass. Do I need to change something or? Seems quite odd to "only" test 2048 of 64G
-
I am booting unraid from UEFI usb install. And do have ECC memory in my system
EDIT: Their website state that they do support UEFI booting and ECC memory from V5 - so will test that this weekend for sure
-
Sorry for asking a noobish question maybe. But is the memtest build into unraid or do I need to run it from a usb stick with some software on it? Saw some other post where the recommended to run it for about 24 hours.
Best regards,
Mads Bryde
-
Hi @John_M I got the error once after the BIOS upgrade, but then it showed socket: 0 - and their is literally no sign of anything in the eventlog 😮 I have no clue what is going on.. But have noticed, that on some rare occasions my motherboard throws a error 60. The BIOS error codes says that it's a memory error, and a recommended option is to reinstall the cpus and clear the CMOS. So maybe I will do that in the weekend. Take out the CPU's and swap them over in the opposite and maybe move tha ram around again. :-S
-
I think it is the RAM then. Because I switched all of them around like 4 days ago. And the DIMMs location reporter by the log seem to have moved around indeed. But the documentation for the motherboard is not really clear on what DIMM slot is what channel. So maybe I need to do some trail and error and look in the reported installed memory to locate it..
But just flashed the BIOS to the newest version today. They released a spectre and meltdown patch. So will leave it running, until I get the error again. And will post it. But before I flashed it, it didn’t even show anything about memory errors in the event log :-(
-
@John_M I have some event log from between the 22 and 24. But I had the same memory error last night on the 23 tho
i will post a screenshot of my memory section in the bios in a sec
- I have switch the ram around, and can see that the issue now is on socket 1 instead of socket 0. So I think it's some of the ram that are failing maybe. Just really hard for me to identifying what stick(s) it is....
-
Sorry for the slow response. My server went offline while I'm away from home. Not sure if the internet connection dropped, or it is really offline tbh. But will post a BIOS event log when I get home. Just need to find out how to dump it tho.
EDIT: Can see their is also a new BIOS update from 26/6/18 - for a spectre & meltdown patches. And improve system performance. So will be flashing that too when I get home.
-
Will try and look at the event log in my BIOS later today. Really don't wanna send back my motherboard, as it order it on newegg.com and live in the EU. And it's a long times since i bought the RAM on ebay. And the errors came up like 1,5 months ago I think. I should have all the same ram from the same manufactor, bought it all at once, and they have same stickers, and heatsinks on. And within the listed specs from my MB manufactor. And i'm not totally sure about the memory overclocking tho. But I don't think I have any of that activated. Could I post the BIOS event log, and have someone look a bit at it with me or?
Best regards,
Mads
-
I keep running it to this weird ram issue, where my log kinda get over flooded with RAM error messages, and don't know why. I have tried switching some of the ram around, but non of it seemed to have worked. Have even tried leaving the system running without any dockers or VM's running. And it still comes up after some time. Sometimes it takes as little as 2 hours to show up. Other times it can take 2 - 4 days. But as soon as it does. I'm hit with a massiv VM performance performance hit.
I have a little screenshot and the diagnostic files here:
-
Hello everyone. I have finally fixed it. The reason why the webgui was not showing up, is that it overwite the network.cfg file with a GUID value from something (no idea what) I installed a new usb, and compared almost all of the files from the two. And now.... NOW IT WORKS AGAIN - and i'm even on 6.6.5, YES SIR!
Thanks for all the help! I will from this point on, never update to a new OS without a backup of my USB drive 😮
-
I'm talking about the files under UNRAID > plugins > apache
Here is what it looks like atm for me. the FSCK* files I was told is something unraid does when trying to uncorrupt data on the flash drive. but as you can see. Some of them are now null bytes, and has some weird naming to it.
-
2 minutes ago, trurl said:
typo in OP then
Yeah sorry about that. But could you maybe help me with the apache folder? Just send it to me, without the .cert files maybe?
EDIT: Oh it was just a shell script. Could you maybe zip up the entire folder minus the httpd folder. That one seems fine 🙂
Best regards,
Mads
-
No I came from 6.5.3 to 6.5.5. So I shouldn't have any troubles. Or atleast I though soo lol. And my servername was still the default one: Tower.local. Will post a diagnostics report in a few minutes.
Thanks
-
Lol @itimpi was JUST looking at that usb drive. I think I will order one tonight. I really think I need it. But this thing is slowly killing me by now. Don't get why I'm having so much troubles
-
UPDATE: I reinstalled unraid 6.6.5 to the same usb stick, and copied over all my config files. And the command line boot for unraid is successful, and I get an ip from my DHCP server. But I cant access the web ui. Not even on the machine itself if I boot into the WebGUI menu.
- not even in GUI safemode can I connect to the webinterface
EDIT: It even shows up under network drives on my mac. But can't connect to it.
UPDATE2: I looked at the config folder again and it seems that some of the apache files got corrupted too. But the flash creator, don't make them from scratch. So can't copy any new ones over
@jonp & @bonienl one of you guys much know where I can get my hands on some new ones? - sorry for the ping btw.
-
Just really a bad time for this to happen. I have some USB sticks. But most of them are 16, 32 and 64 GB. And need them for other things than to host a small OS like unraid.
But I think I need to bid the dust, and just order one off amazon or something asap. So I can transfer my license to that one.
-
Think maybe the USB drive is bad... When trying to copy the big bz* files over. It for some reason eject's itself from my mac and stop the file transfer... So maybe I should find me a new usb drive instead...
-
Think I will try and just replace the files first. And then if that don't work I will install unraid from fresh and just copy over my config folder.
-
I could do that too. But do I need to use my transfer license then? Don't wanna waste it if I don't have to 🙂
Weird RAM issue
in General Support
Posted
After waaaay to long of a diagnostic process I seem to finally have found the defect ram module. It was not channel 8 as MemTest said. But was the DIMM slot reported by unriad. It was CPU 0 Channel 2 - That translate to DDR3_C1 in the MB manual. After pulling that out. It has now been running for 3 days, with no reported memory errors at all. :D