DigitalLF

Hm.. I don't know why i can't seed. I can get at MOST 100kb/s speed across all torrents with or without VPN. Anyone know what could be wrong?

Fixed a few mistakes i made. the file is more correct now.

Well i only updated the once that wore dead! as i said i don't know that much about it!

Thank you for guiding me in the right direction! i spent a few more hours on it the error was in rtorrent.rc But the warnings are not a error correct. but i still want to secure my credentials

!!!!!!WARNING!!!!!!!!!!!!WARNING!!!!!!!!!!!!WARNING!!!!!!!!!!!!WARNING!!!!!!!!!!!!WARNING!!!!!!!!!!!!WARNING!!!!!!!!!!!!WARNING!!!!!!!!!!!!WARNING!!!!!!!!!!!!WARNING!!!!!! I updated the file a bit with so it will find the latest files. It did install but i have NEVER done this before so try it if you can verify it! I would not trust me as i said it's my first time but now ESXi shows that VM Tools are installed. What i did was that i went to slackware ftp and from there i checked what files are current and this worked for me! !!!!!!WARNING!!!!!!!!!!!!WARNING!!!!!!!!!!!!WARNING!!!!!!!!!!!!WARNING!!!!!!!!!!!!WARNING!!!!!!!!!!!!WARNING!!!!!!!!!!!!WARNING!!!!!!!!!!!!WARNING!!!!!!!!!!!!WARNING!!!!!! openVMTools_auto.plg

I have fucked up. I used SSH into unRAID (not the docker itself) and edited rtorrent.rc and now it won't start and i only change the "encryption" line and changed it back after that with NANO as ROOT so maybe it changed file permission or something? I'm not that good with file permission in Linux. i checked the the supervisord.log and all i find is this! and the WARNING and option at the end is just stuff i need help with fixing? How should the file permission be sett for "vpn.conf"? chmod ___ ? chown xxx.yyy vpn.conf i don't know what it means by "explicit-exit-notify"? 2018-03-12 01:04:02,376 DEBG 'rtorrent-script' stdout output: [info] Attempting to start rTorrent... 2018-03-12 01:04:02,378 DEBG 'rtorrent-script' stdout output: Script started, file is /home/nobody/typescript 2018-03-12 01:04:02,398 DEBG 'rtorrent-script' stdout output: Script done, file is /home/nobody/typescript 2018-03-12 01:04:31,514 DEBG 'rtorrent-script' stdout output: [warn] Wait for rTorrent process to start aborted 2018-03-12 01:05:01,635 DEBG 'rtorrent-script' stdout output: [info] rTorrent not running 2018-03-12 01:05:01,636 DEBG 'rtorrent-script' stdout output: [info] Removing any rtorrent session lock files left over from the previous run... Mon Mar 12 00:57:00 2018 WARNING: file '/config/openvpn/ovpn-tls.key' is group or others accessible Mon Mar 12 00:57:07 2018 Option 'explicit-exit-notify' in [PUSH-OPTIONS]:6 is ignored by previous <connection> blocks /mnt/cache/appdata/binhex-rtorrentvpn/ drwxrwxrwx 1 nobody users 40 Mar 11 01:54 rtorrent/ drwxrwxrwx 1 nobody users 42 Mar 4 01:45 rutorrent/ /mnt/cache/appdata/binhex-rtorrentvpn/rtorrent drwxrwxr-x 1 nobody users 22 Mar 4 01:45 config/ drwxrwxr-x 1 nobody users 36 Mar 11 01:54 scripts/ drwxrwxrwx 1 nobody users 20K Mar 11 22:45 session/ /mnt/cache/appdata/binhex-rtorrentvpn/rtorrent/config -rwxrwxr-x 1 nobody users 5.4K Mar 11 22:54 rtorrent.rc* /mnt/cache/appdata/binhex-rtorrentvpn/openvpn -rwxrwxr-x 1 nobody users 601 Feb 1 13:20 ovpn-tls.key* Anyone know what i might have done wrong?

FrozenWineCloud Thank you so much! i will try it now! really bad that the settings won't be saved when all the confs are on my cache drive and not inside the container. oh well! at least it's fixable!

I'm having problems with binhex-rtorrentvpn. It won't save stuff i do in settings in rutorrent most of the time but not all the time. Also i have a problem with port 6881. i want to change it to something else but i don't know where to change stuff like that i don't use DHT if that helps. when i restart the docker the settings goes back to what they wore so my changes are gone. Also why is my appdata\binhex-rtorrentvpn\access.log getting so big (about 2-3 days and 30mb)

yeah the outgoing should be open. but i wore talking about the incoming. i checked your scripts a bit! DAMN you clearly know what you are doing Thank you! But i still have problem with seeding and i don't know why.. but I'm new when it comes to unRAID and Docker. When i press "Test Active Port" it shows a green icon but still not seeding.

Not over the TUN0? I ran a portscan and all was open!

I just setup DelugeVPN with a public IP from a VPN provider. How do i save iptables so and can at least setup a basic firewall? HOWTO save iptables for TUN0 in this docker? i would love to have block all but two ports (deluge ports) on the TUN0.

Thank you! now i need to figure out how to move my dockers to CACHE drive. All new and a lot to learn but I'm having fun with it

it just says it will stop the script but not the mover itself and there is no PS on unRAID to find the PID! This was just sooo stupid of me but I'm only been using unRAID for 14 days.

I just installed a CACHE drive and ran mover but it started to move my big share.. that was not my intent. How do i cancel?

On the binhex-delugevpn docker settings what field is incoming ports (port forward)?

Yeah that was what i thought to but when i change it to that it just says it can't find the file/path. The time was 4 in the morning but i solved it. i ran: docker exec -it binhex-delugevpn /bin/bash and there by i got into the docker and found it should be "/config/openvpn/"

Hi! I'm new when it comes to unRAID, Docker, OpenVPN Anyone around here got OVPN working? On their page i can download .conf files from ovpn-se.zip and that config won't work for me so i was just wondering how it should be edited! This is what working with right now: remote pool.prd.se.ovpn.com 1194 client dev tun proto udp remote-random mute-replay-warnings replay-window 256 remote-cert-tls server cipher aes-256-cbc pull nobind resolv-retry infinite comp-lzo verb 1 persist-key ca /mnt/user/appdata/binhex-delugevpn/openvpn/ovpn-ca.crt tls-auth /mnt/user/appdata/binhex-delugevpn/openvpn/ovpn-tls.key 1 and when i try to start it i checked the logs and i saw Options error: --ca fails with '/mnt/user/appdata/binhex-delugevpn/openvpn/ovpn-ca.crt': No such file or directory (errno=2)

i LOVE Total Commander so Midnight Commander was perfect for me! Thank you guys!!! But i got such a weird problem. i have a server with ESXi and on that i run pfSense, WinServer2016, unRAID and the drive before this one was the same make and model (wd red 8tb) and everything was the same but i moved the information from my VM WinServer2016 because i did not know about this plugin and when i did so i got a transfer speed of 175mb/s and at first i did the same with this drive (and both are brand new btw) but this time around i only got 50 mb/s so i moved the disk over to my HBA card and used this plugin to mount the drive and still i only get 50mb/s and i can't understand why!!!!

THANK YOU!!! that is EXACTLY what i needed !!!

dlandon I'm having a bit of a problem and this might help a lot of people! i got a NTFS drive that i now mounted. I need to move ALL of it's content from a unassigned drive to the array. Like for example a "move content to folder X" button with progress or just a progress based on "data still left on drive" to estimate time. is that something you would consider to make? Other then that thank you very much for a awesome plugin!!

In my VM i thought i couldn't get a IP without the driver so maybe i did something wrong when i created the VM in ESXi but i thought the vmxnet3 driver was missing! Thank you ConnectivIT and StevenDTX for helping us out in our ESXi problems. unRAID really need to get openVMTools included. I'm even thinking about skipping out on unRAID because of this problem.

Hi! I'm all new to unRAID but i wanted to run it in my ESXi server and was just wondering how do i install your plugin? is it as simple as putting a file on my usb drive? i was using PLOP and got no network then found this plugin and changed to plopkexec.iso but now i saw you have not released a "final" for 6.4.0