jpotrz

Well, it's shared with "Everyone" and I'm not prompted for any login/pass when I access those shares from another WinPC on the network. I thought the "Shares" should populate regardless of login/pass population in that window. Where in the diagnostics did you see that error message? Where should I be looking as I test things?

Nope. Just a simple SMB share on my home network. Shared with "everyone"

Hmmm. Not sure what permissions would be needed. That snipet is from the manual entry I did. I'm guessing that would cause problems on it's own. Obviously something is messed up as it's not populating the shares on /Homer when I hit the "load shares" button. I can access the shares from other Windows PCs no problem.

I tried the "load shares" and it doesn't show any shares on any of the PCs on my network. It remains blank. I have the shares set on the PC in question as generic as possible - single letter, shared with "everyone" unRaid is my master browser (Yoda head says so! :)) Diagnostics attached shelbyville-diagnostics-20190212-1132.zip

I'm trying to add an unassigned drive using a share from a Win10 machine on my network. I go to "Add SMB/NFS Share", I choose "SMB' from the dropdown and it can see the PC in question, but it can't see any of the shares on the machine. I have the share(s) set to "everyone" so i shouldn't need username/password but even if I enter that info (same info I log into that Windows machine with) no shares display. I read some other posts where the "finding" shares options doesn't work and that you should just manually type in the share which I've tried. It shows up in unassigned devices as "//myPC/G" but if I try to mount it, it doesn't succeed. Tried on 2 different PCs on my network with the same results. The little light next to the Device in the first column is green though if that means anything... Any ideas? Thanks in advance.

maybe it's buried somewhere in this thread but I didn't see it (I admit I didn't read every single post)... but when I choose a predefined option of "Run Weekly" exactly what day/time does it run? I'm going to guess it's weekly based on the time/day I hit the "apply" button? But wanted to make sure.

can we get a drive color for parity disk(s)?

minecraft/minecraft worked for me today

did the .jar download problem ever get fixed? I'm setting up a server again and had to manually dload, then manually move over. Not a show stopper, but just a minor inconvenience

Couple of (what I think to be) minor requests? When viewing the history tab, could it: A) Auto sort by date (or allow an option to pick which column to auto-sort by)? B) Provide an "average" for both upload and download columns in the header/footer for the chart?

47*C on the drives. I never understand why my drives run so much cooler. Even under load, if mine hi 28*C it'd be a stretch. They idle at 20C

I had just posted a question about resizing the docker.img on Reddit a few minutes ago, then stumbled on this thread It seems the "right" way to do this is to actually delete the dockers, then the image, then reset the image size, then reinstall the dockers? I'm confused as to how all my settings remain etc though?

Can somebody explain how to manually install/run this? Is this every going to be an installable plugin/docker via CA?

So I used the unbalance plugin and it seems to have created a bunch of duplicate (if not triplicate) files on my server. Is there a good way to identify these dupes and delete all but 1? I can navigate in the unRaid UI and see single files on 2 or even 3 disks. I tried dupeGuru scanning in /storage/ but it's not seeing those files? Maybe I'm doing something wrong though? Any help would be appreciated as I've now got TBs of dupes sitting here.

Disabled the services

I'm following the instructions here: https://wiki.unraid.net/Replace_A_Cache_Drive I've disabled dockers, VMs everything. Ran the mover and for some reason my /system/docker.img and my /domains/ folders (containing my VMs) will not move off the cache drive to my pool. I can't seem to figure it out. Edit: Interesting... I just noticed that the system, domains and appdata shares all show freespace as if they were still counting my cache drive too. I have "use cache drive" set to "yes" on those. But it's not moving the data off of them

Sorry - was just following the directions in the Wiki Analyze the syslog and SMART report Either do it yourself, or create a forum post about your problem in the General Support board for your unRAID version. That being said, how do I switch to AHCI in unRaid? And once done, I assume it should then be safe re-enable the drive per the Wiki? https://wiki.unraid.net/Troubleshooting#Re-enable_the_drive

I woke up this morning to the dread red X on one of my HDDs. I was wondering if somebody could take a look at the syslog and SMART report for me to see if they see anything out of the ordinary? (both attached to this post). I actually had issues a week or so ago with another HDD in a different port/bay as well. This server has been up and running for nearly a year without issues. Thanks in advance! syslog.txt WDC_WD3000FYYZ-01UL1B3_WD-WMC130D85YSJ-20181001-0559 disk2 (sdd) - DISK_DSBL.txt

anyway to get a gigabits speed test on this? I can't get accurate readings with the smaller sample files #gbpsproblems Edit: Oops, never mind. I read some of the other posts now. Seems there is an "issue" with gbps lines. Hopefully this can get resolved. EXCELLENT plugin otherwise. Thanks!

Sorry for the delayed response here. I did actually get it up and running. It seems though that it will not launch under the newly released 1.13jar I hit the start button and it literally does nothing at all. No error no message. Nothing

I have MineOS docker up and running, but I'm now trying to import a world my kids made (bare with me, I know little to nothing about MC) That being said, I see where there is an option in the MineOS gui to import a world. Mine kid has exported their world to the .zip, but I have no idea where to copy this file to so that MineOS can import it and that I can run it on our server. ANY help would be appreciated. Thank you.

Ok I seem to have been able to login and get a generic test server up and running. (minecraft/minecraft FYI) I have a world backedup that I would like to install for my kid(s) but, admittedly, I don't know too much about MC. The world he exported is in a folder with a bunch of files. I'm not sure how to get this imported and up and running in this docker though. Any help would be appreciated. Thanks!

maybe I'm being thick here, but what on earth is the default login name? I see I can set the password in the Docker setup, but login????\

I ended up getting the installer to work on a different PC I had here. Just didn't like something about my desktop I guess. Weird as it's the same machine I installed unRaid onto the generic USB stick with a month ago.