zmanfarlee

Ok I set a pool for cache drives. THen I set to go Cache first then Array for App Data, Domains, and System. I will run mover and then do a partiy check. If any one thinks I messed up anywhere please let me know. I plan on running parity check soon. Unraid is great. Always brings me back from brink it seems.

i dont see cache devices

I need to figure out how to replace the cache but I dont see how to set up ache anywhere/ Is there a way to jsut reenable my old cache??? Much appreciated if you have any info

I was able to use a different USB that worked! I found out which disk was parity but I don't know how to add a cache drive before first start of array. Instructions at the link below saylook for "disk" on top and then select it for cache but I don't see "disk" this si the last place I am stuck at before running the array again and getting everything back. ANy help greatly appreciated.

Still not working. Is it posible that with an update the Sandisk UBS I have might have stopped working. I know they have GUID issues or something...

I shoudl add the back up USB created I can plug in and see files. The old one says it can not be read.

Ihave a sandisk USB drive that was 16gb and I think it went kaput. Can't boot unraid. I tried to use a backup of the USB but the only backup I have is like 6 years old. When I boot my server it first tries to run the ssd (Cache drive) but I stop that and go to my backup usb and it still says no operating system. I don't have a complex set up only thing really important is Plex and a foundry server. I just want to be able to access my drives. Is there any way to fix this. Worried as there is a but of data I don't want to lose. I'm assuming it's still there it's just my startup that is borked and I can get the data. I am a novice here but Unraid has always been pretty good so I hope someone can assist. I basically can't get unraid to start.

@JonathanM Looks liek I am back up to 36 on the disk drives after taping etc. I will look ionto a case swap down the line. Area has space but that case is pretty tight on airflow.

@JonathanM Done sir. Thank you. Will see how it goes!

Ambient temp is usually 24c. I think I know one issue I can fix but it is likely cause the case is a t30 poweredge with 4 disks. SHoudl I do a case swap?

I'll have to watch for it next time and quote you to ask but it's like a few degrees into the danger zone and then goes back down if I remember correctly but I will monitor more closely. I am not sure if it will have th record in my diagnostics report.... attached. You really go above and beyond here. Thank you. tower-diagnostics-20220828-2109.zip

No other errors. I have reset. I dont have errors on the other disks. I only get the notifications in the popups and dismiss them. Maybe I shoudl set up an email. The issue is I get a lot of overheat and back to normal warningsa on disks (the yellow warning). No other issues though. Thank yoU!

Look.... I am amazed I have used Unraid this long so far. For what to me would be difficult/impossible I get great help here so thank you. Saw the following issue with cache disk... should I be worried?? SysLog.zip

I am trying to use Real Debrid as a downloader and the only thing I see that can do this is the following: https://github.com/rogerfar/rdt-client I saw someone posted about it before but it didn't really discuss how he got it set up. I have the compose.manager installed and I was able to make an docker image but all the file mapping has me confused. The only way I got sonarr and all of those things working previously was the easy to use file selection in dockers. Does anyone know of a guide for this? If nto no worries I jsut didn't want to keep. At the github page it discusses using /data/downloads as the main folder for downloads but I don't think that maps correctly. I am just throwing up a hail mary inc ase anyone has used this before. Thanks.

nd this https://docs.google.com/document/d/e/2PACX-1vTk67puClDitrjLeAT3NrkgGQAUD2ZWSgVkj_NUAbmT-rBa4Tejx4uY7_-4Gpn_swNKIMjoS-g7255O/pub

Is there a way to set up a Last Oasis Server on Unraid? I usually just use unraid for Foundry, Valheim, and Plex so I am normally in good shape but thought this could be fun. I only know how to install community apps so I am guessing this is to advanced for me. Anyone know of a guide to set something like this up? The below link is the only data I have found so far. No worries if it's too difficult. https://lastoasis.fandom.com/wiki/Last_Oasis_Dedicated_Server

Dude getting unraid was one of my best decisions. Whenever I have had an issue I got help. You guys are amazing.

should be. That was my hail mary. Hopefully someone else can help.

@TheBrian Is your password short? I saw that if it is like 4 or less it could cause an issue.

I hope this works: https://www.scribd.com/document/494433434/Valheim-Dedicated-Server-Manual

Also anyone having server showing publicly it was a port issue for me. One friend still has the issue because valheim is a little buggy so he made a favorite server through steam to direct connect that way and it worked.

Hey all valheim server is runnign beautifully. Saw this text on the server guide from the dev: "Administrating the Server and setting permissions You can edit three separate text-files to set 1) who has admin privileges, 2) who is banned from your server, and 3) who is permitted on your server. These three files, located in the default save path, are called ‘adminlist.txt’, bannedlist.txt’, and permittedlist.txt’. Add Steam IDs (one per line) to set desired roles." I can't find those files in the app data on unraid. Am I looking int he wrong spot?

Dude.... you answered the question perfectly in a half hour..... what did I do to deserve this??? Thank you!

Hello All. I got a Valheim server up and runnign pretty easily (for how I usually mess things up) but had a question: It says on the docker you can run mulitple Valheim servers.... A) How do I create an additional server on my Unraid docker. B) Will I have to create seperate ports for each server and forward or is that not an issue. Any help is greatly appreciated!!!!!!!!!!!!!!!!